Tecumseh Lawn Mower Parts

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.

Cylinder head gaskets are part of internal combustion engines found in snow blowers and other lawn equipment, such as riding lawnmowers. They create a seal for the gas in the cylinder, and prevent coolant and oil from getting into the other cylinders. Even with regular use, cylinder head gaskets can fail. The result is a loose, worn, or damaged component that can no longer perform its job. Signs the cylinder head gasket has gone bad include leaks, overheating, and poor engine performance. A replacement part and repair are required to ensure the continued operations of the device.Replacing a cylinder head gasket requires protective gloves and the proper tools. The technique for replacing a damaged or worn cylinder head gasket will vary depending on the engine's location and the particular gasket that has to be exchanged.This cylinder head gasket is an authentic OEM replacement part. It is supplied by the manufacturer and sold individually. It is compatible with both Tecumseh and Toro snowblowers, lawnmowers, and various cycle horizontal engines. It is made of high-quality, durable material.

This is a genuine fuel line replacement that can be used with select small engines found in outdoor lawn and garden equipment. The fuel line is responsible for delivering or returning fuel to or from the engine while it is in operation. The engine typically has a fuel return line and an intake line, and both can become corroded, worn, or cracked over time with constant exposure to chemicals and high temperatures. If the fuel lines are damaged, they can leak or fail to work at all, making the engine inoperable. When doing repairs, both lines should be replaced at the same time for consistency. This genuine fuel line provides an exact fit for compatible models. This genuine OEM fuel line is manufactured by Craftsman and designed for use in engines on their lawn and garden equipment, as well as certain models from MTD. It can be used on 4-cycle engines found in lawn tractors and chipper/shredder units that are compatible. This fuel line is made of durable rubber and sold as a single unit. Those who need two lines will have to purchase additional quantities. Always drain the fuel and disconnect the spark plug before working on the fuel tank assembly or fuel lines of any engine.

This genuine Tecumseh electric starter cord starts and powers up electric snowblowers. Any brand of electric snowblower cannot be turned on or powered up without an electric starter cord.The electric starter cord of a snowblower might have to be replaced if there is damage that prevents the cord from effectively powering up the snowblower. If the electric starter cord is damaged beyond use, it should be immediately removed and replaced, and the snowblower should not and cannot be used again until a new electric starter cord has been installed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This electric starter cord is compatible with the following brands: Tecumseh, Toro, MTD, and Cub Cadet. This part is sold individually.

This is an intake manifold gasket used primarily in lawnmowers and wood chippers with small engines. The intake manifold gasket sits between the carburetor and the intake manifold. It offers an air-tight seal that ensures the carburetor runs at peak performance levels. The gasket is made from compound material and is durable, but through time and use, the part can wear and break down, which necessitates replacement.Some symptoms of a worn-out intake manifold gasket are engine misfiring, decrease engine power, leaks, and engine overheating. In some cases, the gasket will also break and need to be replaced before the lawn equipment is used. Installing a new intake gasket requires a wrench. Make sure the equipment is turned off and placed on a sturdy surface. Remove the spark plug wire before taking off the carburetor. Next, the manifold gasket can be removed before placing a new component and reassembling additional parts.This intake manifold gasket is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used with lawnmowers and wood chippers manufactured by Craftsman, Lawn-Boy, MTD, Tecumseh, and Toro.

A dipstick is a part that is used to measure the amount of oil in various yard and garden equipment. It allows a person to reach an otherwise inaccessible space by inserting and then removing the dipstick. At that point, checking how much of the dipstick is covered in oil will let a person know whether it needs to be topped off. Over time, these tools can rust, break, or crack and will need to be replaced.Take a look at the dipstick for any damage before making a replacement of the part. If it needs to be replaced, it should be done while the lawnmower or other tool is cooled down. Unscrew the broken or damaged dipstick and take it out of the oil tank. Simply insert the new dipstick and screw it on before checking the oil level and using the machine again.This dipstick is a replacement part for Tecumseh, Cub Cadet, Toro, Briggs & Stratton, Troy-Bilt, Lawn-Boy, and Craftsman lawnmowers, wood chippers, and pressure washers. It comes as an individual component. It is a genuine OEM product that is sourced directly from the manufacturer.