Tecumseh Lawn Mower Parts

This gasket set is a genuine OEM part sourced directly from the manufacturer. It is used in many different lawn and garden machine engines. These gaskets are used in the carburetor to prevent air and fuel from leaking out and reducing engine performance. Everyday use and the excessive heat of the engine can cause damage to the gaskets over time. This is evident by a sputtering engine or one that backfires. This is due to air or fuel infiltrating the combustion chamber through the carburetor. When this occurs, the gaskets will need to be replaced.Open the carburetor and remove the damaged gaskets. Clean the parts of the carburetor, receiving the new gaskets before installing them. If the areas are cleaned well, the new gaskets will not require lubrication. After seating the gaskets, ensure the fit is tight and that there is no buildup of debris or dust that could interfere with a complete seal. If the gasket appears off level, check for dust or tiny particles underneath it; remove it and clean the area before sealing the part. Reinstall the carburetor cover. Start the engine with the pull rope and check for sputtering or backfiring; there should be none. This gasket kit is sold as an individual kit. It is compatible with small engines manufactured by Tecumseh, Toro, and Craftsman.

This air vane is a genuine MTD part and a genuine OEM part. This air vane can be used as a replacement part for snowblowers and lawn and garden equipment engines. The function of the air vane is to maintain precision tension in order to keep the small outdoor appliance engine running. Air vanes may be replaced during the process of basic engine maintenance. If there is an issue with the precision tension of the snowblower, lawn mower, or other appliance at hand, there might be a problem with the air vane. At first, attempt to tighten the spring of the air vane, as it might have naturally come loose with time. If that does not work, a replacement might be necessary. Air vanes are subject to damage simply from long-term usage or exposure to the elements. If there is visible damage to the air vane, action should be taken immediately to replace it if continuing to use the appliance. Continued use with a damaged air vane will be at the risk of expense to personal property. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This air vane is also compatible with the brands Tecumseh and Toro.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine OEM carburetor sourced directly from the manufacturer designed for use in tillers and other small engines. The carburetor controls the mixture and gas and air that reaches the engine at different speeds. Regular use for prolonged periods can lead to the carburetor's failure, resulting in a sluggish engine and reduced fuel economy. A buildup of debris in the carburetor can also cause failure due to clogged airways preventing fuel from reaching the engine. Replacing the carburetor will solve these problems and is much less costly than buying entirely new equipment. Replacing the carburetor requires less than hour of work and a screwdriver, socket or wrench set, and clean basin. Remove the spark plug from the engine and drain the fuel into the clean basin. Locate the air filter and remove it. Remove the fuel line and crankcase. Remove the carburetor from the engine. Install the new carburetor. Reinstall the parts in reverse order. Start the engine and test the carburetor. This is a carburetor made of heavy-duty metal and molded plastic parts; it is sold as an individual pre-assembled unit. The carburetor is compatible with tillers and other small engines manufactured by Toro, Tecumseh, Cub Cadet, and Craftsman.

This dampening spring float is for use in lawn and garden carburetors. It is a vital component that prevents flooding in the carburetor, particularly if the equipment is going over rough terrain or is otherwise unstable.When replacing a missing or damaged spring float, be sure to refer to the manual and diagrams for the carburetor it is being installed in. Location and application of this hardware will vary based on the model of the carburetor.This dampening spring float is a genuine OEM part sourced directly from the manufacturer. It is sold individually. The manufacturer is Tecumseh. This dampening spring float is compatible with products by the following brands: Tecumseh, Craftsman, Toro, Cub Cadet, Lawn Boy, and Husqvarna.

This part is a replacement carburetor vent tube. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken or otherwise defective carburetor vent tube on different models of small engine outdoor power equipment. The carburetor vent tube forces fuel to move through the carburetor by acting as a vent or port that generates pressure. This part is essential to equipment functionality and will require replacement if broken or faulty. Special tools may be necessary to install this part properly. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this carburetor vent tube, reference the owner's manual or equipment diagrams for specific instructions and part location.This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This carburetor vent tube can be used with a variety of lawnmower and wood chipper models manufactured by Tecumseh and Toro.