Tecumseh Snow Removal Equipment Parts

The main nozzle is a part of the carburetor in pressure washers and snowblowers. This is a part of the carburetor assembly and it can be located between the carburetor bowl and carburetor body. It passes through the plastic float component. The nzle is used to direct air or water in the right direction when using the lawn and garden equipment. The main nzle can experience wear and tear or damage which will make it incapable of blowing air or water.If the nzle is broken or cracked, it needs to be replaced. A set of basic tools and work gloves will be useful during the process. First, the carburetor will need to be removed from the equipment. Disassemble the carburetor to gain access to the main nzle. Take the original component out and replace it with a new part. Make sure to reassemble all components before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The main nzle is designed for use in the carburetor of snowblowers and pressure washers manufactured by Lawn-Boy, Briggs & Stratton, Toro, and Tecumseh.

As an ignition coil, this OEM replacement part is tasked with sending voltage to a spark plug whenever the engine is not currently running. It can be used in many tools including snowblowers and lawnmowers. If the ignition coil has malfunctioned or is no longer working, the engine on the lawn and garden equipment will not start. In some cases, a replacement governor arm will also be required.In some cases, when an ignition coil breaks or stops working properly, it will have evidence of cracks, carbon tracking, or burn marks. If visual inspection shows any of those things are present, the ignition coil will need to be replaced. Testing the ignition coil is simple and requires switching it out for a new one to see if the problems stop occurring. A spark tester can also be used to see if the ignition coil has gone bad.This ignition coil is a genuine OEM part sourced directly from the manufacturer. It is compatible with lawnmowers, generators, snowblowers, and tillers manufactured by Briggs & Stratton, Tecumseh, Craftsman, and Toro. It comes as an individual part. An ignition tester can be useful for installation and troubleshooting with this component.

This is a genuine OEM replacement fuel cap sourced directly from the manufacturer. The fuel cap is used on lawn and garden engines that are powered by fuel. It is an integral part of the machine's fuel delivery system. Fuel caps prevent fuel from seeping out of the fuel tank and becoming a safety hazard. The cap's primary function is to keep fuel in the tank and keep water and other contaminants out of the fuel. Everyday use and outdoor elements can cause deterioration of the fuel cap. During scheduled maintenance and refueling of the tank, a visual inspection can quickly show any damage that needs to be addressed. The fuel cap cannot be repaired; it is a one-piece molded-plastic component that must be replaced when necessary. Tools are not required to replace the fuel cap. Work gloves should be worn when working with fuel. Unscrew the broken fuel cap and remove it from the fuel tank. Screw the new filler cap in place. Make sure the threads are lined up and the fit is tight.This fuel cap is sold as an individual unit. It is compatible with fuel tanks on lawn mowers, tillers, generators, and other engines manufactured by Tecumseh, Craftsman, Toro, and Briggs & Stratton.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This is a Tecumseh repair manual that has instructions and tips about working with 4-cycle L-head engines in various types of lawn and garden equipment. This is an important component for anyone who plans to service, repair, or replace parts in any number of Tecumseh machines. It is a needed item for those who use lawn equipment with a specific kind of engine. Repair manuals can be damaged in many ways and experience water damage, holes, scratches, or torn pages. The repair manual can also go missing and a new one will be needed to read more about Tecumseh repairs.If a user has lost their Tecumseh repair manual or needs one because it was never provided, this version is what will give instructions for repairing and replacing different parts of the lawn and garden equipment components. The repair manual has extensive information about making repairs and will speed up any work that needs to be done.This Tecumseh repair manual is a genuine OEM replacement document that is directly sourced from the manufacturer. It is sold as an individual manual. This part can be used with lawnmowers and snowblowers from Tecumseh, Lawn-Boy, Craftsman, and Cub Cadet.

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This replacement part is a spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Tecumseh. This spring is used in different parts inside the engines of different equipment and aids in the engine running smoothly and efficiently. A new spring might be needed if the current one is damaged or missing from the device. If the user hears noises from the engine that are not typical, it might be time to replace this part. It is common that the spring be worn down after years of normal wear and tear. Be sure the device is completely powered down before attempting to replace any spring or other part near or inside the engine. Always wear working gloves while attempting this repair. This spring is sold by itself and is a genuine OEM replacement part sourced directly from the manufacturer. Be sure to reference the owner's manual for specific instructions on how to replace this part.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a carburetor bowl. It holds the gas that is mixed with air before it enters the engine. The carburetor bowl contains a float which regulates the amount of gas needed to mix and fuel the engine.There are times when the carburetor in of itself is considered in good working order but the bowl may be compromised. This can happen if the bowl has been corroded. Rust will damage the carburetor bowl and render it ineffective. When replacing the carburetor bowl, be sure to work in a well-ventilated area and to wear the proper gear when handling engine parts. Once the carburetor is free from the engine, unscrew the bowl from the unit over a catch pan. Any contents will fall into the pan. Disassemble the old bowl's hardware and use it when installing the new bowl.This is a genuine OEM part manufactured by Tecumseh. It is compatible for Toro, Cub Cadet, and MTD engines.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.