Need Help?
Call or text
Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.
This part is a replacement muffler. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. It can be used to replace a broken or otherwise defective muffler in a variety of small engine outdoor power equipment. The muffler helps to reduce noise and vibration emitted by the equipment's engine. If this part becomes faulty or detached, it will need to be replaced. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this muffler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this muffler is suitable for use on several different models of small engine outdoor power equipment manufactured by Tecumseh. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.
This is an ignition coil, also known as a starter coil, responsible for transferring the low current from a battery to the spark plug to create a spark that will start the engine. Designed to increase the intensity of ignition energy, the ignition coil steps up the voltage and can be considered as one of the keys to effective combustion. Engine misfires and equipment stalls are indications of a faulty ignition coil. If the equipment starts then shuts down, the coil may be damaged or loose. A machine that won't restart while it's hot is also a sign of a bad coil that needs replacement. This OEM replacement part is sourced straight from the manufacturer. It works with specific models of pressure washers, generators, lawnmowers, and small engines from Craftsman, Briggs & Stratton, MTD, Toro, and Husqvarna. It is sold individually.
This is a recoil pull starter used in various snowblowers from major manufacturers. The recoil pull starter is a part of the starter assembly and assists with ensuring the engine gets the right amount of power to start when a user pulls the starter rope. Wear and tear or impacts can cause damage to the starter and it will eventually fail. One of the primary symptoms of a bad recoil pull starter is a slack pull cord when trying to engage the engine to use the snowblower. If this occurs, the recoil pull starter needs to be replaced.Turn off the snowblower and disconnect the spark plug wire before removing the recoil housing cap. Untie the pull rope and replace the starter with a new replacement component. Re-tension the spring with the new recoil starter before reattaching the cap that holds the pulley. Reinstall and coil the cord before reassembling other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The recoil pull starter is designed to be compatible with snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.
This part is an inlet needle. This inlet needle works like a valve to transport fuel into the carburetor bowl when the bowl has drained and then stops fuel intake when the carburetor bowl is full. A new inlet needle may be needed if the fuel is not flowing into the bowl as it is supposed to. This can be evident if the carburetor floods or if the engine does not have enough fuel when it's operating at high speeds. A visual inspection of the inlet needle can also be a good indicator of whether or not it needs to be replaced. If any physical signs of damage are present, the inlet needle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This inlet needle is compatible with snowblowers manufactured by Tecumseh and Toro.
The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.
This is a nozzle tube that is used in the carburetor of many types of lawn and garden equipment. The nozzle tube fits into the primary body of the carburetor bowl and then passes through to the plastic float. The nozzle tube is the component that determines the right amount of fuel that should move into the engine. It is responsible for preventing air leaks and turning oil into a vapor that can be used in lawn and garden equipment.If there is an air leak in the engine of the machine, it could be caused by the nozzle tube. In this case, it needs to be replaced. Depending on how bad the leak is, the equipment could operate at much lower power than normal. Before replacing the nozzle, the tool should be placed on a surface and the spark plug wire should be disconnected.This nozzle tube is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. Each nozzle tube is designed to fit snowblowers, generators, and wood chippers with small engines from MTD, Cub Cadet, Toro, Briggs & Stratton, Craftsman, and Tecumseh.
This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.
This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.
This is a genuine replacement exhaust valve. The exhaust valve allows the engine to exhaust as needed. This part also includes the retaining ring, which holds the valve in place as it moves in and out to allow the exhaust to escape from the system. Over time and due to repetitive motion, this valve can break down or become damaged. A replacement will be necessary for proper operation of the machine. If the exhaust valve is faulty, the engine may not run correctly. It may not run at all. A replacement will ensure proper operation of outdoor equipment. Be sure to wear gloves and allow the engine to cool completely before doing any type of engine repairs. This OEM exhaust valve is manufactured by Tecumseh. It meets manufacturer standards for an OEM replacement and is compatible with several machines from the brand. The exhaust valve is sold as an individual part and does not include any additional parts or hardware. Those must be purchased separately.
Cylinder head gaskets are part of internal combustion engines found in snow blowers and other lawn equipment, such as riding lawnmowers. They create a seal for the gas in the cylinder, and prevent coolant and oil from getting into the other cylinders. Even with regular use, cylinder head gaskets can fail. The result is a loose, worn, or damaged component that can no longer perform its job. Signs the cylinder head gasket has gone bad include leaks, overheating, and poor engine performance. A replacement part and repair are required to ensure the continued operations of the device.Replacing a cylinder head gasket requires protective gloves and the proper tools. The technique for replacing a damaged or worn cylinder head gasket will vary depending on the engine's location and the particular gasket that has to be exchanged.This cylinder head gasket is an authentic OEM replacement part. It is supplied by the manufacturer and sold individually. It is compatible with both Tecumseh and Toro snowblowers, lawnmowers, and various cycle horizontal engines. It is made of high-quality, durable material.