Parts for Kenmore Elite 79631422411: Top Cover Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a customized screw used to secure appliance panels and components for a proper fit and safe operation. It replaces lost or damaged fasteners to restore stability and reduce rattling or movement. What it does:

• Secures panels, trim pieces, brackets, or internal components
• Restores proper alignment and prevents rattling or vibration
• Replaces missing or stripped fasteners that cause loose parts
• Helps maintain safe, reliable operation by keeping components fixed

• Disconnect power before servicing any appliance to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or plastic parts
• Keep removed fasteners organized to ensure correct reassembly

This replacement lower cover restores the appliance's lower-front protection and appearance. It shields internal components from dust and debris while helping maintain proper airflow and a finished look at the base of the unit. What it does:

• Protects internal components and wiring located at the appliance's lower front
• Helps prevent dust, lint, and small debris from entering serviceable areas
• Restores the appliance's finished appearance after damage or corrosion
• Can reduce noise from loose or damaged lower panels when properly secured

• One lower cover

• Disconnect power and, if applicable, gas before servicing the appliance
• Remove the kick plate or access screws to access and remove the old lower cover
• Reuse original fasteners when possible; replace damaged clips or screws as needed
• Check fit and secure all fasteners; verify no wires or hoses are pinched before restoring power

This switch assembly is the microwave's door interlock module. It mounts to the latch board and contains the switches that confirm the door is closed, restoring consistent start/stop operation when worn or sticking switches cause intermittent "door" errors.

• Houses and positions the interlock micro-switches on the latch board
• Signals the control that the door is securely closed so the unit can run
• Common fixes for: won't start, stops when the door is jostled, "door" error messages, or runs but doesn't heat
• Helps correct intermittent operation caused by fatigued or misaligned switches

• Disconnect power before servicing; microwaves retain dangerous high voltage
• Remove the upper grille and control panel to access the latch area per your model
• Note wire locations and switch orientation; move connectors one at a time to the new assembly
• After installation, verify door latching and test operation before reassembly

This detergent box is the molded dispenser drawer that holds and releases liquid or powdered detergent into the wash tub during cycles, helping ensure detergent is delivered where needed for cleaning. What it does:

• Holds liquid or powdered detergent and channels it into the washer during the fill and wash cycles
• Helps prevent detergent from spilling into the cabinet or away from the wash water
• Common symptom of failure: detergent leaks, fails to dispense, or sits in the drawer instead of flowing into the tub

• One detergent box (dispenser drawer) as shown

• Remove power and water connections before accessing the dispenser area
• Inspect surrounding seals and mounting tabs; replace if damaged to ensure a proper fit
• Clean the dispenser area and rinse with water before installing the new box to remove residue

This softener cap seals the water softener housing to keep salt and resin contained and help maintain proper softening performance. Replace a cracked or missing cap to stop leaks and restore the unit's ability to hold softener media. What it does

• Seals the softener or water-treatment housing to prevent leaks and salt loss
• Keeps softener resin or salt contained for proper operation
• Helps prevent water intrusion that can reduce softener efficiency
• Can resolve symptoms like visible leaks, loose or missing cap, or salt bleeding from the canister

• One softener cap

• Turn off water supply and unplug power to the appliance before servicing
• Drain or remove any loose salt/resin from the housing before removing/installing the cap
• Hand-thread or gently press the cap into place; do not overtighten to avoid damage
• If the housing or sealing surfaces are damaged, replace those parts before installing this cap

The Hinge is an OEM replacement part for LG top-loading washing machines. This hinge allows the washing machine lid to open and close smoothly. One hinge is included in this pack. The hinges are held on by six screws.

Causes of failure can include general wear and fatigue from years of opening and shutting the lid. The connecting bracket may also become misshapen due to excessive weight loads.

Symptoms denoting worn hinges include:

• Difficulty lifting or controlling the lid's movement
• Grinding noises and sounds of strain coming from hinged areas
• Lids left ajar or not sitting completely flush after opening

This OEM LG part is also compatible with some Sears/Kenmore model washing machines.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This factory parts assembly replaces a worn or damaged assembly to restore the appliance's original function and fit. It's a direct-fit replacement designed to simplify repair and reduce downtime. What it does:

• Replaces the original factory assembly to restore the affected mechanism
• Re-establishes proper alignment and connections for the related components
• Helps stop symptoms like intermittent operation, loose fit, or non-functioning mechanism
• Matches OEM form and mounting points for a straightforward swap

• One complete parts assembly as shown

• Always disconnect power before starting any repair
• Use basic hand tools; avoid forcing connectors or mounting tabs

The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.

Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.

Symptoms of a bad water inlet valve include:

• Inability to properly fill the washer tub during cycles
• Water leaking or flooding from the valve area
• Erratic water temperature or varying fill levels between loads
• Cycles failing to advance due to inadequate or unregulated water flow

This OEM LG part is also compatible with Sears/Kenmore models.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

This filter assembly is the refrigerator water filter housing that holds and secures the replaceable water filter cartridge, helping deliver clean-tasting water and proper flow to the dispenser and icemaker. Designed to match OEM fit and function. What it does:

• Houses the water filter cartridge so water is processed before reaching the dispenser and icemaker
• Restores proper water flow when a damaged or cracked housing restricts supply
• Helps prevent contaminants and odors from passing through the system when used with the correct filter cartridge
• Supports reliable sealing to reduce risk of leaks at the filter connection

• One filter assembly housing

• Turn off refrigerator water supply and dispense any remaining water before beginning work
• Replace only with the correct OEM housing and compatible filter cartridge for this unit
• Inspect O-rings/seals and replace if worn to ensure a watertight fit

The Dispenser Assembly is an OEM part for LG washing machines. This part dispenses the appropriate amounts of detergent, fabric softener, or other laundry additives at the right time during the wash cycle.

Causes of a bad Dispenser Assembly can include clogging or buildup of residue, damage to the dispensing mechanisms or components, or issues with the electronic controls that regulate the dispensing process.

Symptoms of a bad washer Dispenser Assembly include:

• Improper dispensing of detergent or fabric softener
• Leaks or drips from the dispenser area
• The dispenser drawer not opening or closing properly
• Failure of the dispenser to dispense at the correct time during the cycle

This OEM LG part is also compatible with some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.