Parts for Ge GFW450SPM1DG: Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Small self-tapping screw used to secure appliance panels and internal components. Replaces worn or missing fasteners to restore proper fit and alignment for covers, brackets, and trim pieces. What it does

• Secures sheet-metal panels, brackets or trim to the appliance chassis
• Replaces stripped, corroded or missing screws that allow rattling or loose parts
• Helps restore proper panel alignment and prevents vibration noise
• Works where a self-tapping thread is required in thin metal or plastic mating parts

• Power off and unplug the appliance before servicing
• Use the correct screwdriver bit to avoid cam-out and head damage
• Start threads straight and drive carefully—do not overtighten to avoid stripping
• Replace like-for-like; match screw length and thread type to the original

A small M5 x 12 machine screw used to secure panels and components in compatible appliances. Simple, serviceable hardware that helps restore proper fit and stops rattling or loose parts. What it does:

• Fastens panels, brackets, or components where an M5 x 12 machine screw is specified
• Restores secure attachment when original screw is missing, loose, or damaged
• Helps eliminate vibration noise and misalignment caused by loose hardware
• Fits into pre-tapped holes designed for M5 machine-threaded fasteners

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or hex driver to avoid stripping the head
• Install straight and tighten snugly; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating fastener or insert as needed before reuse

This M8 hex nut is a standard threaded fastener used to secure components and panels. It restores proper clamping force for connections that have come loose, helping eliminate movement and intermittent contacts. What it does:

• Secures bolts, studs, and mounting hardware to hold parts and assemblies in place
• Restores tight mechanical connections that can prevent rattling or misalignment
• Helps maintain electrical grounding and stable joins where a nut is required
• Commonly used wherever an M8 threaded connection is specified by the manufacturer

• One M8 hex nut

• Disconnect power to the appliance before servicing; follow all safety guidelines
• Replace only with the correct size and thread type for a safe fit
• Hand-start threads to avoid cross-threading, then tighten to appropriate torque (do not overtighten)
• If the nut fastens components related to gas, water, or electrical systems, ensure those utilities are turned off and tested according to local codes

This flat metal washer provides a simple, durable spacer or load distributor for fasteners on select GE clothes washers. It helps maintain secure connections and proper spacing to prevent loosening and uneven loading during operation. What it does

• Distributes bolt or screw pressure to protect mating surfaces and prevent pull-through
• Maintains correct spacing and alignment for assemblies that use small fasteners
• Helps reduce loosening from vibration that can cause noise or misalignment
• Commonly used where a thin, durable washer is needed in washer assemblies

• Disconnect power and unplug the appliance before starting any repairs
• Turn off water supply when working near water lines or tub assemblies
• Use the correct size fastener and torque to avoid over-compressing the washer
• Inspect mating parts for damage and replace any worn hardware to ensure a secure repair

The Gasket is an OEM part for GE washing machines. It forms a watertight seal between the washer door and the drum, preventing leaks during wash cycles.  

Common causes of a faulty gasket include wear and tear from regular use, mold or mildew buildup, or damage from sharp objects during loading and unloading.

Symptoms of a bad gasket include:

• Water leaking from the washer door during or after a wash cycle
• Visible cracks, tears, or deformations in the gasket
• The presence of mold or mildew on the gasket
• Difficulty closing the washer door securely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tub Front is an OEM part for GE washers. This front outer tub houses the inner drum and contains the water during the washing cycle. The outer tub front is built to withstand the constant movement, water pressure, and vibrations that occur during the washing process, providing a reliable and leak-proof enclosure.

A bad outer tub front can occur due to physical damage, corrosion, or wear and tear over time. If you notice symptoms such as water leakage, excessive vibrations, or visible cracks or dents in the tub front, it may be time to replace it.

Symptoms of a bad outer tub front include:

• Water leakage from the washer
• Excessive vibrations during operation
• Visible cracks or dents on the tub front

Restore your GE washer by replacing the faulty outer tub front with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The TUB SEAL is an OEM component specifically designed for GE washers. It is a rubber gasket located between the inner and outer wash tubs designed to prevent leaks. During cycles, the seal withstands contact with fast spinning and surging water pressure to maintain a watertight barrier. 

Symptoms of a bad tub seal include: 

• Puddles, drips, or leaks visible beneath the unit during or after cycles
• Excess moisture trapped between the inner and outer tubs
• Mineral or soap film buildup indicating escaping water 

Causes can be cracks developing from age and repetitive flexing during cycles, or deformities in the rubber preventing proper compression.

Replace yours today with this genuine OEM GE part to ensure a dependable water containment solution. This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

The Drive Pulley Kit is an OEM part for GE washing machines. The drive pulley works by transferring the motor's power to the drum via the drive belt, ensuring the drum rotates properly during the wash and spin cycles.

Causes of a bad drive pulley can include wear and tear over time, damage due to overloading the washer, or issues such as misalignment or loose components.  

Symptoms of a bad drive pulley include:

• Loud, unusual noises during operation
• The drum not spinning or agitating
• The washer not completing cycles properly
• Visible damage or wear on the pulley

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Driving Belt is an OEM part for GE washing machines. This part connects the motor to the drum, facilitating the drum's movement during the wash and spin cycles, ensuring your laundry is cleaned effectively.

Common causes of a bad driving belt include normal wear and tear, overloading the washer, or exposure to high heat or friction. 

Symptoms of a bad Driving Belt include:

• Drum not spinning or agitating
• Washer making unusual noises during operation
• Burning smell from the washer
• Visible cracks or wear on the belt

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drive Motor Assembly is an OEM part for GE washing machines. It contains the electric motor that provides agitation and spinning movement during wash cycles.

Causes are often operational wear degrading internal motor windings and components over extended years. Failure endangers proper cleaning and rinsing performance.

Symptoms of a failing motor include:

• Weak or sluggish agitation leaving clothes dirty
• Inability to enter spin cycles for excess water removal
• Grinding noises emanating from inside the machine
• Complete lack of movement detected

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This support pressure hose connects the refrigerator's pressure-sensing system to the air chamber, helping the dispenser/ice system sense and regulate pressure. Replaces a cracked or collapsed hose to restore proper pressure communication. What it does:

• Channels air pressure from the dispenser/ice housing to the pressure sensor or switch
• Prevents false pressure readings caused by kinks, cracks, or blockage
• Commonly replaced when dispenser or ice maker shows inconsistent operation or error codes related to pressure
• Helps restore reliable dispenser/ice system response when the original hose is damaged

• Refer to the refrigerator service manual for proper routing and secure connection points
• Disconnect power and water supply before beginning service to avoid shock or leaks
• Inspect clamps and nearby fittings; replace damaged clamps or seals as needed

This pressure hose clamp secures the small vacuum/pressure hose to its fitting, keeping the hose in place so the appliance can accurately sense water level and cycle pressure. Simple, direct replacement for a worn or loose clamp. What it does:

• Holds the pressure/vacuum hose snugly to prevent leaks or hose detachment
• Helps maintain proper pressure signal for correct cycle and fill operation
• Commonly used when a loose or damaged clamp causes intermittent pressure-related symptoms
• Small replacement part that restores a firm hose connection

• Disconnect power (and water, if applicable) before servicing the appliance
• Use a small screwdriver or pliers to remove the old clamp and secure the new clamp in place
• Ensure the hose is fully seated on the fitting before tightening the clamp

This air chamber assembly cushions water pressure in the appliance's supply line to reduce water hammer and help stabilize dispenser and ice-maker flow. It installs inline and restores smoother, quieter water operation. What it does

• Dampens sudden pressure changes in the water line to reduce knocking or banging sounds
• Helps maintain steadier water flow to dispensers and icemakers
• Can reduce stress on valves and fittings caused by water hammer
• Improve intermittent flow symptoms related to pressure spikes

• One air chamber assembly

• Turn off water supply and unplug the appliance before beginning work
• Drain water from the line and relieve pressure before removing the old part
• Inspect fittings and tubing for damage; replace any worn seals or clamps
• Tighten connections and test for leaks after installation

This heater support stabilizes and secures the heating element assembly to keep the heater properly positioned for safe, efficient operation. Replaces a damaged or broken support to reduce rattling and prevent heater misalignment. What it does:

• Holds the heating element assembly in place so it stays aligned during operation
• Prevents the heater from contacting other components, reducing noise and wear
• Helps maintain proper airflow around the heater for consistent heat output
• Commonly replaced when cracked, warped, or missing mounting tabs

• Disconnect power to the appliance before starting any repair
• Inspect surrounding parts (heater, clips, wires) and replace any damaged items
• Use basic hand tools; handle the heater element carefully to avoid damage

This inside gasket clamp secures the appliance's inner door gasket, helping maintain a tight seal and reduce leaks. It's a small but important retaining clip used where the gasket meets the door or opening. What it does:

• Holds the inner edge of the door or tub gasket in place to keep the seal seated
• Helps prevent water or air from leaking around the door during operation
• Restores proper gasket alignment when a worn or broken clamp allows the gasket to shift
• Works as a replacement for damaged or missing gasket retaining clamps

• One gasket inside clamp (single clamp as shipped)

• Recommended to inspect the gasket and surrounding trim for wear before installing the clamp
• Remove power and water (if applicable) to the appliance before servicing
• May require basic hand tools and careful prying to remove the old clamp and seat the new one
• If gasket is damaged or torn, replace the gasket as well for a reliable seal

This outer door gasket clamp secures the washer's door boot to the front panel, keeping the seal tight around the door opening to help prevent leaks and keep the gasket seated during operation.

• Holds the outer lip of the door gasket (boot) against the front panel
• Helps maintain a watertight seal at the door opening
• Replace if the clamp is bent, stretched, broken, or missing
• Symptoms include the boot slipping off, water leaking at the front, or a loose gasket

• Disconnect power and wear cut-resistant gloves for safety.
• Open the door, gently pull back the gasket, and remove the old outer clamp.
• Ensure the gasket is fully seated on the front panel lip, then install the new clamp evenly around the opening.
• After installation, run a short cycle and check for leaks around the door.

A small flat washer used on GE washing machines to properly space and secure fasteners. Replacing a worn or missing washer helps keep components aligned and reduces loosening that can cause noise or vibration. What it does:

• Provides a stable spacer between mating parts to maintain correct alignment.
• Helps secure bolts and nuts, preventing fasteners from backing out over time.
• Common signs of a failing or missing washer: loose panels, rattling, or increased vibration.
• Exact-size replacement (34 x 12.5 x 3.5 mm) to match OEM fit.

• Always disconnect power and water supply before beginning any appliance repair.
• Install in the same orientation as the original part; do not force or deform the washer.
• Use the correct fastener and tighten to a snug fit—avoid over-tightening.

A replacement M12 x 25 flange bolt used to secure appliance components where a washer-style bolt head is required. Durable fastener that restores proper fit and helps stop movement or vibration in assemblies. What it does:

• Secures panels, brackets or assemblies that use an M12 flange-style fastener.
• Restores proper clamping force when an original bolt is stripped, corroded, or missing.
• Helps eliminate rattling, loose parts, or misalignment caused by a failed fastener.
• Works wherever a metric M12 x 25mm flange bolt is specified by the manufacturer.

• One flange bolt (M12 x 25)

• Disconnect power and follow manufacturer safety instructions before servicing.
• Use the correct socket or wrench to avoid rounding the head; tighten to the appliance manufacturer's torque specification.
• Inspect mating threads and replace if damaged; do not force a damaged bolt.
• If the OEM manual calls for threadlocker or a specific torque, follow those instructions.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.