Parts for Lg WD200CV: Tub Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Lid Assembly is an OEM replacement part for LG washing machines. It is the top cover that provides access to the washer's tub, allowing users to load and unload laundry items.

Symptoms of a faulty washer lid assembly include:

• Difficulty opening or closing the lid
• The lid not fitting securely or sealing properly
• Cracks, dents, or other visible damage to the lid structure

Causes of a bad lid assembly can stem from physical impact or mishandling, excessive force when opening or closing, warping due to heat exposure, or simply normal wear and tear over extended use.

This OEM LG part is also compatible with applicable Sears/Kenmore washer models. 

The Motor Rotor Bolt is an OEM part for LG washing machines. It secures the rotor to the motor shaft, playing a crucial role in the efficient functioning of the motor and ensuring the washer drum spins correctly during wash cycles.

Causes of a bad motor rotor bolt can include wear and tear from prolonged use, corrosion due to exposure to moisture, or damage from over-tightening or accidental impacts. A faulty motor rotor bolt can compromise the stability of the motor, leading to various operational issues.

Symptoms of a bad motor rotor bolt include:

• The washer drum not spinning or spinning irregularly
• Unusual noises during operation, such as banging or clunking
• The washer failing to complete cycles or stopping mid-cycle
• Visible wear or damage to the bolt or surrounding components

This OEM LG part is also compatible with Sears/Kenmore models.

This tub cover assembly replaces the inner cover that surrounds the washer tub, restoring proper sealing and alignment so clothes move freely and the wash action stays consistent. What it does:

• Covers and protects the tub interior, helping keep clothes clear of internal components
• Helps maintain proper drum alignment and reduces rubbing or catching of items
• Restores the tub enclosure when the existing cover is cracked, warped, or broken
• Can reduce abnormal noise caused by a damaged cover contacting the drum

• Disconnect power and water supply before starting any repair
• Installation generally requires partial disassembly of the washer cabinet and removal of the outer tub or drum assembly
• Handle edges carefully—parts and cabinet openings can be sharp
• Use OEM fasteners and follow manufacturer instructions for proper reassembly

This part is a hinge. This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective hinge on multiple different models of LG washers and dryers. This part is made for use with LG appliances and may not correctly fit appliances manufactured by other brands. This hinge is for attaching the lid of the washer or dryer to the appliance, allowing it to open and close smoothly. If the lid will not open properly, the hinge may need to be replaced. Please follow appropriate safety precautions when attempting to replace any appliance parts. Ensure the washer or dryer is fully disconnected from its power source before attempting this repair. For more accurate information on how and where to install this replacement hinge, the manufacturer owner's manual and diagrams should be referenced.As an authentic replacement part, this hinge is suitable for use on several different models of washers and dryers manufactured by LG. Please note that this is a genuine part made of high-quality, durable plastic and is sold individually.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This thermistor assembly monitors water temperature inside the washer tub and relays a precise signal to the control board. Replacing a failed sensor restores accurate temperature sensing and helps prevent cycle errors and performance issues. What it does:

• Measures wash water temperature and sends the signal to the electronic control
• Enables the control to adjust cycle operation based on temperature feedback
• Common failure signs: tE/TE error codes on some models, incorrect temperatures, long cycles, or cycles that won't advance
• Intermittent faults may cause sporadic errors or inconsistent performance

• 1 thermistor assembly

• Disconnect power and shut off water before servicing
• Access location varies by model; the sensor is typically mounted in the outer tub or heater housing
• Unplug the harness, pull the old sensor straight out; seat the new sensor fully and reconnect the harness
• Route wiring away from moving parts; restore power and run a test cycle, checking for proper operation and any leaks around the sensor port

This hose connector links the appliance's water line to internal plumbing, restoring a secure path for water flow and preventing leaks. Designed to match OEM fit for reliable sealing where the supply hose meets the unit. What it does

• Connects the external water supply hose to the appliance inlet so water can flow into the unit.
• Replaces a damaged, cracked, or leaking connector to stop drips or pooling under the appliance.
• Helps restore proper filling and water delivery when a compromised connector restricts flow.
• Provides a stable, sealed junction to reduce vibration-related loosening.

• One hose connector as pictured

• Turn off water supply and power to the appliance before starting any work.
• Inspect hose ends, clamps, and any O-rings/seat; replace damaged seals for a leak-free fit.
• Hand-start fittings, then tighten to OEM torque; avoid over-tightening plastic fittings.
• After installation, restore water and power, then run a short cycle and check for leaks.

This hose connector links the appliance's water line to internal plumbing, restoring a secure path for water flow and preventing leaks. Designed to match OEM fit for reliable sealing where the supply hose meets the unit. What it does

• Connects the external water supply hose to the appliance inlet so water can flow into the unit.
• Replaces a damaged, cracked, or leaking connector to stop drips or pooling under the appliance.
• Helps restore proper filling and water delivery when a compromised connector restricts flow.
• Provides a stable, sealed junction to reduce vibration-related loosening.

• One hose connector as pictured

• Turn off water supply and power to the appliance before starting any work.
• Inspect hose ends, clamps, and any O-rings/seat; replace damaged seals for a leak-free fit.
• Hand-start fittings, then tighten to OEM torque; avoid over-tightening plastic fittings.
• After installation, restore water and power, then run a short cycle and check for leaks.

This hose clamp secures a rubber hose connection to prevent leaks where the hose meets its fitting. A tight, uniform seal helps maintain proper water flow and keeps the appliance operating reliably.

• Provides a tight, 360-degree seal around the hose barb/fitting
• Helps correct issues like water leaks at the hose connection point
• Maintains correct hose attachment during operation and vibration
• Step-less ear design distributes clamping force evenly

• Unplug power and shut off water supply before servicing
• Note clamp orientation and hose routing before removal
• Use appropriate ear-clamp pincers or pliers to compress the clamp evenly
• Check the hose and fitting for wear; replace if cracked or deformed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.