Parts for Kenmore 110.81442710 (11081442710, 110 81442710): Washer Basket And Gear Parts

This washplate mounts in the washer tub to help direct water flow and improve cleaning performance. It replaces a worn or damaged plate to restore normal wash agitation and rinse distribution. What it does

• Guides and distributes wash and rinse water around the load for more even cleaning
• Helps stabilize wash action and reduces uneven wear on adjacent components
• Commonly replaced when cracked, broken, or causing noisy operation during cycles

• One washplate

• Turn off power and disconnect the washer before beginning service to avoid electrical or mechanical injury
• Inspect surrounding seals and fasteners; replace any damaged hardware to ensure a proper fit
• Use basic hand tools; tight tolerances may require gentle alignment during reassembly

A screw kit that replaces missing or damaged mounting and trim screws to restore secure attachment of panels and components. Ideal when stripped or lost fasteners cause panels to rattle, sit loose, or fail to align. What it does:

• Replaces worn, missing, or damaged screws used to secure panels, trim, and internal appliance parts.
• Helps stop rattling, loose panels, or gaps caused by missing fasteners.
• Restores proper fit and stability after repairs or disassembly.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screw from the kit for each location; reference the parts diagram to match size and length.
• Do not overtighten screws to avoid stripping threads or cracking panels.

A screw kit that replaces missing or damaged mounting and trim screws to restore secure attachment of panels and components. Ideal when stripped or lost fasteners cause panels to rattle, sit loose, or fail to align. What it does:

• Replaces worn, missing, or damaged screws used to secure panels, trim, and internal appliance parts.
• Helps stop rattling, loose panels, or gaps caused by missing fasteners.
• Restores proper fit and stability after repairs or disassembly.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screw from the kit for each location; reference the parts diagram to match size and length.
• Do not overtighten screws to avoid stripping threads or cracking panels.

This flat washer is a small hardware spacer that helps secure and stabilize fasteners and assemblies on the appliance. It provides a consistent bearing surface to reduce wear and maintain proper alignment for connected parts. What it does:

• Provides a smooth, even surface for nuts and bolts to tighten against
• Helps maintain correct spacing and alignment of components
• Reduces wear and friction between mating parts
• Can prevent fasteners from loosening due to vibration
• Common symptom: loose or wobbling assemblies where a washer is missing or damaged

• Disconnect power and water before servicing the appliance
• Support the assembly being worked on to prevent sudden movement when removing fasteners
• Replace with the same size/type washer for proper fit; do not substitute with an incorrect size
• Tighten fasteners securely but avoid over-torquing which can deform the washer or strip threads

This replacement screw is a direct-fit fastener designed to secure appliance panels and components, restoring proper fit and reducing vibration or rattling caused by missing or loose hardware. What it does:

• Fastens panels, trim, brackets, or components to restore proper alignment
• Stops rattling or vibration caused by loose or missing screws
• Maintains structural fit where original hardware has been lost or damaged
• Matches OEM thread and head type for a secure, low-profile fit

• Disconnect power and water to the appliance before starting work
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; tighten until snug to prevent damage to threads or plastic parts
• If replacing multiple fasteners, use matching OEM screws to ensure even fit

This replacement filter screens out debris and contaminants as designed by your appliance, helping protect internal components and maintain proper performance. Replace a damaged or clogged filter to keep airflow or flow rates within spec and reduce issues.

• Captures particles before they reach sensitive components
• Helps maintain proper airflow or water flow
• Replace if clogged, torn, warped, or saturated
• Helps with symptoms like reduced performance, odors, residue, or related error codes

• Disconnect power and, if applicable, shut off water before servicing
• Allow hot surfaces to cool; use gloves to avoid cuts from sharp edges
• Note the filter's orientation; seat fully and secure per your model's instructions
• Restore power/water and run a brief test to confirm correct operation

The Suspension is an OEM component specifically designed for Whirlpool washing machines. It is responsible for securely mounting the tub inside the washer cabinet while allowing it to spin and wash without excess vibration.  

The suspension plays an important role in smoothly spinning the tub during agitation and spin cycles. It isolates vibrations generated by an unbalanced load to prevent damage to other components.

Causes of a bad suspension can include fatigue from years of use, damage from overloading or unbalanced loads, or failure of suspension springs or mounts.

Symptoms of a bad suspension include:

• Excessive shaking and rattling of the washer cabinet
• Loud banging noises during the operation  
• The tub not spinning or spinning unevenly
• Premature wear of other components like belts

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This gearcase is the washer transmission that transfers motor torque to the agitator and wash basket, restoring agitation and spin function in compatible top-load washers. Durable replacement for worn or noisy transmissions. What it does

• Converts motor rotation into the geared motion needed for agitation and spin.
• Stops gear slippage and restores proper agitation when the original unit is worn.
• Can reduce grinding, clunking, or loss-of-drive symptoms related to a failed transmission.
• Supports normal wash and spin cycles when installed correctly.

• One gearcase (transmission) assembly.

• Disconnect power and water before starting any repair.
• Requires basic hand tools and access to the washer cabinet; some models need the agitator, basket, and motor removed.
• Inspect associated seals, fasteners, and linkage for wear and replace as needed; use factory service instructions for torque and alignment.

This actuator is a small motorized mechanism that moves a linked component inside your appliance, allowing it to shift modes or positions at the correct time. Replacing a worn actuator restores proper motion and reliable cycle operation.

• Converts electrical signals into controlled movement to drive a lever, valve, or door linkage
• Ensures the associated mechanism shifts/opens/closes when the control calls for it
• Signs of failure include the linked mechanism not moving, staying stuck, or moving intermittently
• Appliance may fail to change modes, stop mid-cycle, or display a related error code
• Clicking, buzzing, or grinding noises from the actuator area

• Disconnect power before servicing; turn off water supply if applicable
• Access the actuator by removing the necessary covers/panels; note wire locations and routing
• Transfer any brackets or clips from the original part; align the output/lever exactly as the original before tightening fasteners
• After reassembly, run a diagnostic or calibration cycle to confirm proper movement

This cam brake is the replacement braking cam used on select dryers to engage the brake assembly and help control drum stopping. It restores smoother, more reliable drum braking for safer, quieter operation. What it does:

• Works with the dryer brake assembly to help stop and hold the drum after power is removed
• Reduces continued coasting or delayed stopping of the drum
• Can reduce grinding, scraping, or unusual noises coming from the brake area
• Helps maintain correct drum alignment during shutdown

• One cam brake

• Disconnect power before beginning any repair
• Refer to the dryer's parts diagram and service manual for proper placement and orientation
• May require removal of the dryer front panel or drum for access; use common hand tools

The Drive Motor is an OEM part for Whirlpool washers. It is responsible for powering the drum's rotation during wash and spin cycles. 

A bad drive motor can occur due to electrical issues, mechanical failures, or excessive wear and tear. If you notice symptoms such as the drum not spinning, unusual noises during operation, or error codes appearing on the control panel, it may be time to replace the drive motor.

Symptoms of a bad drive motor include:

• Drum not spinning or rotating
• Unusual noises during operation
• Error codes displayed on the control panel

Restore your washer by replacing the faulty or damaged drive motor with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This idler pulley keeps the dryer drive belt tensioned so the drum turns smoothly, restoring normal drum rotation and reducing noise. It's a direct-fit replacement when the pulley is worn or seized. What it does:

• Maintains correct tension on the dryer drive belt so the drum spins without slipping
• Helps eliminate squealing, grinding, or rumbling noises from the dryer
• Prevents belt wear and premature belt failure due to misalignment
• Keeps the drum rotating smoothly for even drying and proper cycling

• One idler pulley

• Unplug the appliance and move it to a safe, well-lit area before beginning
• High-level steps: access the dryer cabinet, release belt tension, remove old pulley, install new pulley and re-tension the belt
• Use hand tools and follow OEM torque/placement; avoid forcing parts to prevent damage

This drive belt transfers power from the motor to the appliance's pulley system so internal components rotate smoothly. Replacing a stretched or broken belt restores proper motion and helps eliminate slipping, squealing, and stalled cycles.

• Transfers motor rotation to the pulley system to drive internal components
• Maintains proper tension for consistent speed and performance
• Wear can cause slipping or failure
• Symptoms can include no or intermittent rotation, squealing/squeaking, thumping, or a burning rubber odor

• Disconnect power; shut off water or gas supply if applicable
• Access the belt path; release the tensioner/idler and remove the old belt
• Route the new belt exactly as specified; ensure pulleys and tensioner spin freely and are aligned
• Hand-rotate to verify tracking before reassembly; test run for smooth, quiet operation