Parts for Bosch SHE9ER55UC/50: Water Supply Tube / Spray Arms / Racks Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement dishwasher water tube channels water between components. Replace if cracked, clogged, or leaking. Confirm fit with your model number.

Replaces the rotating spray arm shower head in your dishwasher's upper rack. Install a new one if yours is cracked, broken, or keeps falling off the tube.

Dishes not getting clean? A cracked or clogged spray arm prevents proper water distribution. This replacement part restores even spray coverage.

Dishes not getting clean? A damaged or clogged spray arm prevents proper water distribution. This rotating arm restores even spray coverage and performance.

Protective cover that secures the spray arm assembly in your dishwasher. Replace if cracked, broken, or missing to properly retain spray arm components.

If dishes aren't getting clean or spray nozzles are clogged, this upper tower spray head restores water coverage. Direct-fit installation in minutes.

Traps small food particles and debris in your dishwasher to prevent clogs. Replace if damaged, torn, or when cleaning performance declines. Confirm fit with your model number.

Captures debris before it enters the pump system. Replace when clogged, calcified, or damaged to prevent E22 errors and ensure clean dishes. Verify fit.

Replace your dishwasher's lower dishrack if it's rusted, cracked, or has broken tines. This rack installs below the upper level to hold plates and cookware.

Replacement wheel for dishwasher lower rack. Snaps into place to restore smooth rolling when wheels are broken, cracked, missing, or worn out.

Replace your dishwasher's cracked, loose, or broken door handle. Restores secure grip and smooth door operation. Direct fit for compatible models.

Dishwasher pump bearing supports rotating components for smooth operation. Replace if you hear grinding or squealing noises. Verify fit with your model.

Supports the drum for smooth, quiet rotation. Replace if you hear grinding noises or feel excessive wobbling. Confirm fit with your model number.

Replacement trim insert for dishwasher control panel. Restores proper fit and finish when original is cracked, broken, or missing. Eliminates gaps.

Dishwasher rack insert secures components within the dish rack assembly. Replace if cracked, broken, or missing to restore proper alignment and fit.

Fits inside the utensil basket to separate and support flatware for proper spray coverage. Replace if cracked, broken, or missing to restore normal loading.

Factory bearing that supports rotating components in your dishwasher. Replace when you hear grinding noise or feel resistance. Verify fit by model number.

Door strike plate for dishwashers. Mounts to the door frame to secure the latch mechanism. Replace if cracked, bent, or missing to restore proper alignment.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement crockery basket for your dishwasher. Holds plates, cups, and saucers at adjustable levels. Replaces cracked, broken, or damaged baskets.

Fitted trim piece that covers attachment points and gaps where panels meet in your dishwasher. Replace if the original is cracked, frayed, or missing.

The Bearing is an OEM component specifically designed for select Bosch dishwashers requiring stabilized rotational movement. As a friction-reducing fixture, it facilitates the smooth operation of assorted mechanisms.  

Precision-ground steel and reinforced polymer composite withstand harsh chemicals and high spinning velocities without excess heat or noise. Independent shielding maintains lubrication without contaminating surrounding compartments.

Causes requiring bearing replacement usually involve coolant deterioration building friction. Physical impacts may dislodge protective seals exposing components to intrusions no longer offering intended cushioning.

Symptoms signaling the need for a new bearing incorporate:

• Grinding or scraping noises emitting from moving joints
• Reduced cycle speeds from binding components  
• Excessive rotational resistance detected by diagnostics sensors

This OEM Bosch replacement bearing is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on long-lasting suspension elements. Proper installation restores noise-dampening characteristics throughout operational stresses.

Replacement trim insert for dishwasher racks. Secures panels and tines, closes gaps for proper alignment. Needed when original is cracked, broken, or missing.

Replacement trim insert for dishwashers. Covers gaps between panels and restores clean exterior appearance. Needed when original is cracked or missing.

Narrow trim strip that finishes dishwasher panel edges for a clean, seamless look. Replace if cracked, broken, or missing to cover gaps and protect seams.

Replacement cup rack for dishwasher upper rack. Secures cups, mugs, and small glassware upright during wash cycles. Replaces broken or missing holders.

Replacement cutlery drawer for dishwashers. Installs at the top rack to organize silverware and utensils. Replaces cracked, broken, or missing trays.

Cutlery basket frame for Bosch dishwashers. Organizes and supports forks, knives, and spoons. Replace if cracked, broken, or damaged from wear.

Replace worn cutlery drawer roller assembly when drawer sticks or doesn't glide smoothly. Restores easy utensil access. Verify fit with your model number.

This dishwasher holder secures components in place during wash cycles. Replace if cracked, broken, or missing to restore proper fit and function.

The Clip is an OEM part for Bosch dishwashers. This part secures and stabilizes items within the dishwasher, such as racks, hoses, or panels. This part prevents movement that can lead to wear, noise, or even damage during cycles, the Clip is essential for maintaining the dishwasher's integrity and performance over time.

Causes of a bad Dishwasher Clip can range from natural wear and tear, which can weaken or break the clip, to accidental damage during cleaning or maintenance. 

Symptoms of a bad Dishwasher Clip include:

• Dishwasher components becoming loose or detached
• Increased noise or vibration during operation, indicating parts are not securely held
• Difficulty in loading or unloading dishes if racks or similar parts are not properly secured

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement cutlery basket for your dishwasher. Holds silverware and utensils during wash cycles. Order a new basket if yours is cracked or missing.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.