Parts for Husqvarna 968999765: Wheels And Tires Parts

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This part is a replacement spacer. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spacer is broken or in any way damaged, this part can be used as a replacement. It is intended for use with lawn tractors.This spacer is fitted into the lawn tractor's tires to help fill the gap within the tire axle. This ensures that the wheel can rotate smoothly. Proper tools are required to install this part, including a wrench set, hammer, and punch. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spacer, the appropriate owner's manual and equipment diagrams should be referred to. This spacer is suitable for use on a variety of lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This valve stem is a genuine Husqvarna part, sold individually. This valve stem can be used as a replacement part in a lawn mower or an edger. The purpose of the valve stem in a lawn mower or an edger is to allow the flow of fuel and air into the carburetor of the appliance so that it can be mixed in the proper ratio to feed to the spark plugs and ignite the engine.The valve stem in a lawn mower or an edger should be replaced if the valve stem has been damaged. This could occur if the valve stem is punctured, dented, torn, scraped, warped, or eroded to the point that it cannot serve its usual function of sealing and opening up the combustion chamber of the appliance. If this occurs, the valve stem should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This valve stem is compatible with the following outdoor appliance brands: Husqvarna.

This is a tire that is designed to be used with Husqvarna lawnmowers. The tire is made out of a hard rubber and attaches to the mower's caster fork. As time goes on, the tire can experience damage and may no longer work correctly. A visual inspection of the tire will indicate if the tire has any cracks, holes, or other areas of damage. If this has occurred, the tire will need to be replaced for the lawnmower to easily move across the lawn.A wrench set, a socket set, and a nut driver may be required to replace this part. A pair of work gloves can also be used during the replacement process. The process involves removing the bolt, the nut, and the spacer that are located on the caster fork. Next, remove the tire from the wheel so the new tire can be mounted in its place. Reassemble all parts before use.This tire is an authentic OEM replacement part that is sourced directly from the manufacturer. This component is sold on an individual basis. The part is made to be compatible with lawnmowers created by Husqvarna.

This lug nut is a genuine Husqvarna part, sold individually. This lug nut can be used as a replacement part in a lawn mower. The purpose of the lug nut is to serve as a fastening part, in conjunction with a bolt, in any number of components within a lawn mower.The lug nut in a lawn mower is a small component that might be lost or misplaced easily, as its absence might not cause a direct effect in the operation of the appliance. However, if the lug nut is found to be missing, it should be immediately replaced by this genuine OEM replacement part. Additionally, the lug nut can suffer damage. If the lug nut is sufficiently stripped to render its function reduced or negated, it should be replaced.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lug nut is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, and Jonsered.

This wheel assembly is a genuine Husqvarna part, sold individually. This wheel assembly can be used as a replacement part in a lawn mower. The purpose of the wheel assembly in a lawn mower is to support the base of the lawn mower so that it can be propelled by the operator, once the control cable is engaged and the engine is powered on, across a variety of surfaces.The wheel assembly in a lawn mower might need to be replaced if the wheel is irreparably damaged. This could occur if the tread or the metal components of the wheel have been scraped, torn, dented, cracked, punctured, eroded, or warped beyond functionality. If this occurs and the lawn mower can no longer be easily driven across surfaces, the wheel assembly should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This wheel assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a tire and wheel assembly that is intended for use with zero-turn lawnmowers. This assembly includes both a black tire and the silver-colored wheel rim. A new tire and wheel assembly may be needed if the tire has a hole or cut in the rubber that cannot be repaired. This can happen if the lawnmower runs over a nail or other sharp object that causes damage to the tire. After years of normal use, the tire and wheel assembly may become worn out and need to be replaced due to normal wear and tear.This tire and wheel assembly is a genuine OEM Husqvarna part. It is sold individually. This specific tire and wheel assembly is compatible with zero-turn lawnmowers manufactured by the Husqvarna brand and the Craftsman brand.