Parts for Craftsman 917378960: Wheels / Tires / Bag Parts

This OEM part is a mulcher mower blade for lawnmowers. The mulcher mower blade is the blade assembly that is used to cut grass in a lawnmower. Over time, the mower blade can deteriorate, becoming dull and ineffective with extended use. If it's been a while since the blade has been replaced, it might be time for a new one. Luckily replacing a mower blade is a relatively simple process. Before beginning, the engine cool and wear work gloves. Disconnect the spark plug wire from the spark plug and remove the fuel tank cap. Place a plastic bag over the fuel tank opening and reinstall the fuel tank cap to keep gasoline from leaking out of the fuel tank cap vent. Tilt the mower back to lift the front wheels and secure the mower handle to a work table to hold the motor steady. Wedge a block of wood between the mower blade and the deck to keep the blade from turning when loosening the blade bolt. Loosen and unthread the blade bolt while holding the cutting blade to keep it from falling. Pull the blade, blade support, and blade bolt off the crankshaft. Make sure to position the new parts on the crankshaft. Hand-tighten the new blade and bolt onto the crankshaft. Use a torque wrench to tighten the blade bolt. This genuine replacement part is compatible with MTD brand lawnmowers.

This dishwasher door spring counterbalances the door's weight for smooth, controlled opening and closing. Replacing a worn or broken spring restores proper door tension and helps prevent the door from dropping quickly or feeling heavy.

• Provides tension to counterbalance the dishwasher door during opening and closing
• Helps prevent the door from slamming open or feeling overly heavy
• A weakened or broken spring can cause uneven door movement, squeaks, or the door not staying in a partial-open position
• Restores smooth, even door operation when replaced

• Disconnect power and turn off water supply before servicing
• Remove the toe-kick and carefully slide the dishwasher out to access the side/frame area where the spring attaches
• Note the original spring attachment points and orientation; install the new spring in the same locations
• Springs are under tension—use caution and hand protection; many replace both springs together to maintain balanced tension