White Outdoor Snow Removal Equipment Parts

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

The roll pin, also called a shear pin, is a slender metal piece that fastens the driveshaft to the auger of a snowblower. This pin actually does double duty as a safety device. When moving through the snow-covered ground where objects cannot be seen, sometimes the snow-moving auger will come into contact with something other than snow. Since the driveshaft of the blower will continue to turn regardless of the mobility of the auger, the auger would be destroyed or significantly damaged upon encountering such an object. The roll pin is designed to shear off when the auger suddenly stops so the working parts of the blower are not damaged. Most blowers are designed so that the pins are easily accessible. By rolling the blower so the belly plate is up, it is easy to remove the belly plate and see where the shear pin goes through the driveshaft and connects with the auger. The broken piece of the old pin can be forced through by the new pin by gently tapping it with a hammer. This OEM genuine replacement part is compatible with a number of snowblowers, including Craftsman, Troy-Bilt, MTD, Yard Machines, and Yard-Man.

This replacement part is a gear. This is a genuine replacement part made by MTD. This part is made with ridges that are able to connect to other parts so that they can turn or spin during use. This transfers energy and force to different pieces in the machine to ensure that the everything is working properly. A new gear might be needed if the current one is struggling to stay attached to other parts. This can be due to the ridges become stripped over time. If this is the case, the gear should be replaced. gears experience large amounts of friction and will need to be replaced after a while. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This driveshaft assembly is an authentic OEM replacement part sourced directly from the manufacturer for use on snowblowers. The drive shaft assembly connects the transmission output gear to the drive wheel. The drive shaft assembly provides the power that moves the snowblower. If the drive shaft breaks or fails, the drive shaft will need to be replaced. Signs that the drive shaft is beginning to fail include vibrations, difficulty turning, loud noises, and possibly a squeaking noise. If these symptoms occur, early replacement of the driveshaft will keep the snow out of the driveway without having to wait for a repair.Before repairing the snowblower, make sure it has not been used and the engine is cool. Wear protective eyewear and gloves when making the repair. If routine maintenance is complete before the snow season begins, the drive shaft assembly repairs may be found in time to make repairs before the snow starts. This driveshaft assembly is made of high tensile strength and is sold as an individual unit. This driveshaft assembly is designed for use in snow blowers made by MTD, YardMan, Troy-Bilt, and Cub Cadet.

This replacement part is a gearbox assembly is intended for use in different types of lawn equipment. It is a genuine replacement part made by MTD. This part allows the user to control the different gear settings and power modes during use. This allows for proper and smooth use over time. A new gearbox assembly might be needed if the current one is missing or damaged in any way. If the damages are so bad that the user is unable to operate the machine it is recommended that this part be replaced as soon as possible. Refer to the owner's manual before attempting to replace this gearbox assembly. Be sure to wear work gloves as this part can be near other sharp pieces. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part to ensure long-lasting use.

This oil seal is a genuine MTD part, sold individually. This oil seal can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, chainsaws, and wood chippers. The oil seal partitions off the internal components from the external components so oil leakages do not occur.The oil seal in an outdoor appliance might have to be replaced if the component is torn, ripped, or punctured. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This oil seal is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard-Man, Yard Machines, Huskee, Montgomery Wards, MasterCut, and Turf King.

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.