Parts for Frigidaire PRT217MCF1: 02 - Door Parts

This part has been discontinued by the manufacturer and is no longer available.

This hinge plug fits coffee maker hinge assemblies to cover and protect the pivot area, helping keep the hinge moving smoothly and preventing debris buildup. Simple replacement for worn or missing hinge covers. What it does:

• Covers the hinge pivot on the coffee maker to protect against dirt and spills
• Helps maintain proper hinge alignment and smooth door/lid movement
• Reduces wear on the hinge by blocking debris and moisture
• Commonly replaced when the original plug is cracked, broken, or missing

• Designed for a snap-in or press-fit installation; replace when hinge is exposed or damaged
• Disconnect power and ensure the appliance is cool before servicing near the brewing area
• Use care not to force the plug; align with the hinge pivot and press until fully seated
• If other hinge components are damaged, inspect and replace them as needed for proper function

This part has been discontinued and is no longer available.

Replacement mounting screw for refrigerator components and panels. Secures interior parts, shelves, or housing. Order when original is stripped, lost, or damaged.

This part has been discontinued by the manufacturer and is no longer available.

Replacement mounting screw for refrigerator components and panels. Secures interior parts, shelves, or housing. Order when original is stripped, lost, or damaged.

Replacement part may be longer than needed, per the manufacturer it will have to be cut to fit.

Color: white. Measures about 2 inches high by 1-1/2 inches deep.

Replaces a cracked, broken, or worn door support bracket that holds and aligns your refrigerator door. Restores proper door fit and reduces sagging.

Left-hand door shelf end cap support secures refrigerator door shelves. Replace if cracked, broken, or missing to properly hold door bins in place.

Right-hand door shelf support endcap for refrigerator door bins. Replaces broken, cracked, or missing supports that secure shelf bars to the door panel.

This part has been discontinued and is no longer available.

Replacement screw for various appliances. Used to secure panels, components, or housing. Replace if stripped, corroded, missing, or damaged hardware.

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. This gasket forms a seal around the refrigerator door, ensuring that cold air stays inside and warm air remains outside, maintaining the appliance's efficiency and keeping food fresh.The gasket measures approximately 44.6" X 30.69"

Causes of a bad door gasket can include regular wear and tear, mold or mildew buildup, and physical damage from repeated opening and closing of the door. 

Symptoms of a bad refrigerator door gasket include:

• Warm air entering the refrigerator, causing it to run more frequently
• Condensation or frost buildup inside the refrigerator
• Difficulty keeping the door closed
• Visible cracks, tears, or deformation in the gasket

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement part may be longer than needed, per the manufacturer it will have to be cut to fit.

This part has been discontinued by the manufacturer and is no longer available.

Secures components inside your refrigerator. Replace if broken, loose, or missing to prevent rattling and ensure proper part positioning. Verify fit with your model.

This part has been discontinued and is no longer available.

Replace your cracked or broken refrigerator door shelf. This bin installs directly on the door to hold condiments and beverages. Order now if damaged.

Left side door shelf support. Color: White. Measures about 1 3/4 inch x 1 3/4 inch. For the right hand side order 3206150.

The Right Hand Door Shelf Support is an OEM part for Frigidaire refrigerators. This support bracket holds the door shelf in place, providing stability and ensuring that items stored in the door compartment remain secure.

Causes of a bad door shelf support can include wear and tear from regular use, physical damage from overloading the shelf, or breakage due to impact when opening or closing the door. Over time, the plastic material can also become brittle and crack.

Symptoms of a bad door shelf support include:

• Door shelf sagging or detaching from the door
• Difficulty in securing items on the shelf
• Visible cracks or damage to the support bracket
• Items falling out when opening the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part has been discontinued and is no longer available.

Left-hand door shelf end cap support secures refrigerator door shelves. Replace if cracked, broken, or missing to properly hold door bins in place.

Right-hand door shelf support endcap for refrigerator door bins. Replaces broken, cracked, or missing supports that secure shelf bars to the door panel.

This part has been discontinued and is no longer available

Secures components inside your refrigerator. Replace if broken, loose, or missing to prevent rattling and ensure proper part positioning. Verify fit with your model.

This part has been discontinued by the manufacturer and is no longer available.

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.