Parts for Generac 006673-0: Air Cleaner & Carburetor Parts

This Generac insulator gasket is for Generac brand generators. It is used to keep heat from the engine away from the carburetor. The longer the generator runs, the warmer it will get, and a properly functioning Generac insulator will prevent the device from overheating. After use and with normal wear and tear, these Generac insulator gaskets will begin to wear down and become ineffective. Users will notice the generator is getting too warm after running for some time, or the entire device may fail. A worn down or damaged insulator gasket must be replaced before continuing operations of the generator.Replacing a Generac insulator gasket can be done relatively quickly with the proper tools. Always wear protective gloves when repairing any engine components. Remove the old or ineffective gasket before replacing it with a new one. Ensure all parts are lined up and secure before starting the machine.This Generac insulator gasket is an authentic OEM replacement part. It is sold as an individual unit. The insulator gasket is for Generac brand generators only, and it fits several different models. The replacement part is made of high-quality, durable materials.

This is a carburetor gasket replacement that is for use with generators. The gaskets are an important feature of any engine. The gasket will help to provide an airtight seal for the carburetor. This will ensure that there is not too much air getting into the carburetor, which could cause problems with the air to fuel mixture. Too much air could mean that the engine will have trouble running. It could start to stall out. To ensure that the engine is performing properly, owners will want to check their carburetor gaskets. The gaskets will start to wear down over time. They can stretch and they can start to dry out and break. This means they will no longer provide an airtight seal. Owners should check their gaskets if they are noticing the generator's engine has trouble running and not stalling. When performing maintenance on the carburetor or rebuilding the carb, they should replace the gaskets. This is a genuine OEM part that has been sourced from Generac. The carburetor gasket is sold individually and is specifically for use with generators from Generac.

This part is a replacement carburetor assembly. This part can be used to replace a defective or broken carburetor assembly in generators. The carburetor ensures that there is the correct mixture of fuel and air to properly run an engine. Over time, the individual components in a carburetor can wear out, which may cause issues starting or running the generator, thus requiring replacement. When working on or near an engine, it is important to ensure that it is powered off and completely cool before beginning repairs.This is a genuine OEM part made by Generac and has been sourced directly from the manufacturer. It is sold individually. As an authentic replacement part, this carburetor assembly is suitable for use on generators manufactured by Generac, Honeywell, and Siemens.

This is an authentic carb to air cleaner gasket sourced from Generac. The gasket is placed between the air cleaner and the carburetor, and it will act as another means to reduce the amount of air that is coming into the carburetor. This is important because if there is too much air, it will affect the fuel-air mixture that is going into the carburetor. This could result in problems with the engine's performance and consistency. The carb to air cleaner gasket will start to wear out the longer it has been used. It can start to dry out and crack, and parts of it could break off entirely. This would mean more air can get into the engine. To prevent this, owners will want to make sure that they check on the gasket and replace it as needed. This should be a part of the routine maintenance of the small engine. The carb to air cleaner gasket is a genuine OEM product that is sold individually. It is designed for use in certain models of Generac small engines, such as those found in generators and gas-powered pressure washers.

The Generac air filter element is used to clean the air that enters the carburetor of the generator. This is a two-part filter with a pre-cleaner and a cleaner. The dual filter provides added cleaning before the air gets to the carburetor.Dirt and debris obstructs the flow of air and limits how much air makes it to the carburetor. If the carburetor does not receive proper airflow, this can result in reduced performance and more gas use. Visual inspection, as well as scheduled maintenance, is important in keeping the generator running efficiently. If a visual inspection shows that the filter is clogged, it should be removed and replaced, regardless of the maintenance schedule. Remove the air filter cover by loosening the knob that holds it in place. Remove and dispose of the air filter. Place the new air filter inside and replace the cover. If the air filter is not visibly dirty, check the maintenance schedule and replace the filter if it is time according to the schedule. Regular maintenance and replacement will keep the generator operating properly and efficiently, costing less to operate when airflow is optimal.This is a genuine OEM Generac part that is sourced from the manufacturer. It is sold individually and in packs of two. This air filter is for use in Generac personal generators.