Michael W for Model Number Electrolux EI26SS55GSO Over a two year period, ice/water dispenser sporadically fails to shut off. Recently, power failure beeper sounds without there being an interruption to the electrical supply. Yesterday, "CE" displayed instead of refrig temp and freezer temp but compressor seemed to be operating. Control board did not respond to finger pressure input. I unplugged power cord to reset system. Upon resupplying power, beeper sounded, compressor seemed to come on and temperatures were displayed for a few seconds. Then system shutdown and communication error was indicated. Other Electrolux owners seem to experience similar malfunctions. 1. I need to diagnose the problem precisely. 2. I need to obtain the correct replacement components. 3. I need instructions in how to make the replacements myself. Can you help me with these tasks? michael whitesides
Answer Michael, The first thing that you will want to do is to check wiring at the main control board and the user interface. To access the main control board it is located underneath the unit and held in by 1/4" screw. To access the user interface you will need to remove the trim around the dispenser and there will be 2 screws holding the user interface in place. The CE error could be caused by either one of these boards being faulty. You will want to replace the user interface first if all wiring is correct and if that does not solve then replace the main control board. Read More... Answered by AppliancePartsPros.com | Wednesday, February 27, 2013