Customer Questions and Answers for Control Board (Printed Circuit Board) by Frigidaire

Susie, First remove power to the washer, move the washer out so you can access and remove the screws across the back of the top panel. Slide the top panel back a few inches, until the front tabs release the top, and set it aside. Remove the(2)screws, one on each end, holding the console to the top of the side panels. Remove the(3) screws behind the detergent drawer panel. Lift the(3) tabs to release the top of console from the mounting plate. Roll the console forward, while lifting up to release the bottom tabs from the front panel. Unplug and label the wiring harness from the control panel and lift the panel off the console. Removing the electronic control: Disconnect the washer from the electrical supply and remove the console. 2. Lay the console on a soft flat surface, remove the (5) screws holding the control to the console. Lift the control out of the console.