Customer Questions and Answers for Icemaker Assembly by Frigidaire

Hello David, You will need to order and install a diode kit 5303918287 to prevent this issue. Shorted diode: When you activate the dispenser and water comes out both the dispenser and ice maker fill tube, the harness needs to be replaced. 1. Disconnect the power cord 2. Remove connector from single coil valve and remove the dark blue and yellow wires from the Molex connector. 3. Cut the two dark blue wires about 1" from the diode. (The diodes are inside the black heat shrink that the blue wire with yellow tracer goes into one end and the 2 blue and 2 yellow wires come out the other end) 4. Cut the yellow wire about 1" from diodes 5. Remove old diode subassembly. 6. The 2 blue wires cut in step 3 need to attaché to the brown wire in the new diode harness with the connector provided. Slide the heat shrink over the wire first, install the connector and slide the heat shrink over the connector and heat to seal the connector. 7. The 2 yellow wires cut in step 3 need to be attached to the yellow wire in the new diode harness with the connector provided. Slide the heat shrink over the wire first, install the connector and slide the heat shrink over the connector and heat to seal the connector.