Customer Questions and Answers for Motor Pulley by Whirlpool

Curt, If the washer agitates and drains, but won't spin, theres a 90 % or better chance you have a seized tub bearing. You'd need to remove both tubs and all components inside the tub to replace the tub bearing and tub seal assembly(s) 6-2095720 6-2040130 12112425 and a spanner wrench TB123B. if that's the case. totest the transmission, raise the front of the washer and block it up, remove the drive belt to the center pulley. Turn the pulley counterclockwise and the agitator should oscilate back and forth. Turn the pulley clockwise and the tub should start to turn/spin in 1/2 to 3/4 of a revolution( you may even hear or feel the bearing "break loose" if you do it right. It usually takes 60 or so minutes for a DIY'r to perform and worth the time and effort(in my opinion). Good Luck and Thanks