Parts for QFT15ESSN0WW: Blower, Motor & Condenser Assembly Parts

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

The MOTOR ASSEMBLY is an OEM part for GE electric dryers. It houses the drive motor that powers the tumbling and drying action inside the dryer drum. The motor assembly works continuously throughout dryer cycles to rotate the drum and circulate air over clothes.  

Symptoms of a bad motor assembly include:

• The dryer drum not spinning or tumbling items 
• Loud grinding or clicking noises coming from the motor area
• The dryer not heating properly or cycles not completing
• Motor overheating causing safety features to trip

Causes of a bad motor assembly are often normal wear and tear over time. The windings and internal components face repetitive stress with each use. Impact or other damage can also accelerate motor failure.  

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace your worn motor assembly to restore dependable drying and prevent further issues.

This condenser coil assembly helps remove heat from the refrigeration system so the appliance cools efficiently and runs properly. Replacing a damaged or blocked condenser can restore normal cooling and reduce run time. What it does:

• Sheds heat from the refrigerant to the surrounding air to allow proper cooling
• Helps maintain correct compressor pressure and system efficiency
• Common symptom: refrigerator runs continuously or compartments feel warm
• Common symptom: excessive heat buildup behind the appliance or poor cooling performance

• Disconnect power before servicing to avoid shock or injury
• Handle the coil carefully—edges may be sharp and fins can be damaged
• May require removal of rear access panel or lower kickplate for access

This internal drain hose routes defrost and condensation water from the evaporator area to the refrigerator drain, helping prevent pooling and leaks inside the cabinet. It restores proper drainage and reduces ice buildup around the evaporator. What it does:

• Channels defrost and condensate water from the evaporator to the drain system
• Helps stop water pooling inside the fresh-food section or freezer bottom
• Can reduce recurring ice buildup or water leaks caused by a damaged or clogged drain tube
• Fits behind the liner and connects to the existing drain path

• Disconnect power to the appliance before starting any service.
• Access may require removing interior panels or the evaporator cover—follow OEM disassembly steps.
• Avoid sharp bends or kinks in the hose and ensure proper seating in drain fittings.
• Inspect or replace clamps and seals if corroded or brittle to ensure a watertight connection.

This drain pump assembly circulates and removes water from the appliance's tub so cycles can complete and standing water is cleared. It's a direct replacement that restores normal draining and helps prevent overflow or unwanted odors. What it does:

• Pumps wastewater out of the tub and into the drain line so cycles can finish
• Helps clear standing water after a wash or rinse cycle
• Can resolve symptoms like incomplete draining, water left in the tub, or drain-related error indications
• Works with the appliance's drain hose and filter to maintain proper flow

• Disconnect power to the appliance before starting work to avoid shock
• Turn off the water supply and/or disconnect water lines if access requires it
• Access and removal typically require removing the appliance kick plate or lower access panel and disconnecting electrical and hose connections
• After installation, secure all hoses and wiring, restore power, and run a short cycle to check for leaks and proper operation

A replacement float switch that detects excess water in the refrigerator drain pan and signals the system to run or shut off components to prevent overflow. Restores proper water-level sensing to help stop leaks and shutdown faults. What it does:

• Senses water level in the drain/collection pan and closes or opens the circuit as levels change
• Helps stop water overflow or pooling under the appliance when the defrost drain or pan fills
• Can trigger fans or pumps or signal control boards depending on model wiring
• Common symptom: water under or around the fridge, or error/faults related to drain/pan sensing

• One float switch

• Disconnect power to the appliance before servicing
• Handle connectors and wires gently; note wiring positions before removal
• Mount the switch in the drain/collection pan area so the float moves freely
• Test continuity with a multimeter after installation to confirm function

This overflow tube routes excess water from the appliance to the drain to help prevent pooling or leaks. A simple replacement restores proper overflow drainage and reduces risk of water damage. What it does

• Channels excess water away from sensitive components and out to the drain
• Helps stop water pooling inside the appliance or on the floor
• Commonly replaced when cracked, clogged, split, or visibly leaking
• Can resolve symptoms such as water under or around the appliance, repeated small leaks, or overflow conditions

• One overflow tube

• Disconnect power and shut off the water supply before starting any repair
• Access the tube; remove retaining clips or clamps as needed
• Inspect adjacent hoses, seals and clamps and replace if damaged
• After installation, restore power/water and run a short cycle to check for leaks

This is a capacitor intended for use with dryers. This part is used in tandem with the dryer's motor to start the appliance. The capacitor sends a jolt of electricity to the motor, which in turn activates the appliance. With use over time or because of damage caused otherwise, the dryer capacitor may malfunction. It can also fail entirely. When the dryer capacitor is no longer working efficiently, it has to be replaced.Malfunctioning dryer capacitors will emit a humming or buzzing sound instead of kicking the dryer into full operation mode. Replacing a dryer capacitor is simple. It is always necessary to unplug the appliance before starting the process of repairing the part. Wear gloves for protection. A multimeter can be used to test the old capacitor before removing the part. If it fails, replace it with a new part and reassemble the machine.This dryer capacitor is a genuine OEM replacement part. It is sold as an individual unit. It is made of durable, high-quality materials. The dryer capacitor is sourced from the manufacturer. The dryer capacitor can be used in several models of machines made by RCA, General Electric, and Hotpoint.

This mounting bracket secures the dryer belt switch in place so the switch can detect belt position and function correctly. It restores reliable switch alignment for proper belt monitoring and safe dryer operation. What it does:

• Holds the belt switch in the correct position so the switch can sense belt presence and movement
• Helps the machine detect a broken or slipped belt by maintaining switch alignment
• Prevents intermittent switch contact caused by a loose or misaligned mounting point
• Can resolve symptoms such as no tumble, intermittent drum movement, or dryer not sensing a belt

• One belt switch mounting bracket

• Disconnect power to the appliance before starting any repair
• Basic hand tools are typically required; handle parts carefully to avoid damaging the switch
• Align the bracket so the switch actuator contacts the belt or idler per the original mounting location
• After installation, restore power and run a short test cycle to ensure correct switch operation

This outer flat washer is a small, flat spacer that keeps drum and rotating components aligned for smooth operation and reduced wear. It helps maintain correct clearances between moving parts to limit noise and rubbing. What it does:

• Provides a flat, stable surface for adjacent parts to seat against, preventing metal-on-metal contact
• Maintains proper spacing and alignment of the drum or pulley assembly
• Helps reduce rubbing, squeaks, and vibration caused by misaligned components
• Used where a thin, durable spacer is needed to ensure smooth rotation

• One outer flat washer

• Disconnect power and unplug the appliance before beginning any repair
• Small part; keep track of related fasteners and any shims removed during disassembly

This inner flat washer is a small flat metal spacer used in laundry appliance assemblies to maintain correct spacing and reduce friction between rotating or fastened parts for smoother, quieter operation and reduced wear. What it does

• Acts as a spacer to maintain proper clearance between shafts, drums or mounting components.
• Distributes load from fasteners to prevent localized wear and damage to mating surfaces.
• Helps reduce friction and vibration that can cause noise, rubbing or uneven rotation.
• Replace if you see visible wear, deformation, corrosion, or if the appliance shows rattling, squealing or binding during operation.

• Disconnect power to the appliance before starting any repair.
• Access the washer by following the appliance-specific service manual or diagram for your model.
• Inspect adjacent parts (shafts, bearings, seals) and replace any damaged components to prevent re-failure.
• Reinstall with the correct orientation; do not overtighten fasteners which can deform the washer.

This blower wheel is the fan that mounts to the drive motor and moves air through the dryer drum, across the heater, and out the exhaust. Restores proper airflow for efficient drying and reliable lint collection. What it does

• Pulls air through the drum and heating system to maintain consistent airflow
• Helps carry moisture out of the dryer through the exhaust duct
• Worn or broken fins can cause weak airflow and longer dry times
• A stripped hub or wobble may cause rattling, scraping, or vibration noises

• 1 blower wheel

• Disconnect power (and shut off gas supply for gas models) before servicing
• Access typically requires removing the front panel and blower housing; beware of sharp edges
• Clean out lint/debris in the housing and ducts before reassembly
• Ensure the wheel seats fully on the motor shaft and spins freely without rubbing

This blower wheel circulates air across the condenser to help dissipate heat and maintain proper cooling performance. Replacing a worn or damaged wheel restores airflow and reduces noise or overheating issues. What it does:

• Spins to move air over the condenser coils so the system can reject heat efficiently
• Restores proper airflow when a cracked, bent, or broken wheel is causing reduced cooling
• Helps eliminate rubbing or rattling noises from a damaged or unbalanced wheel
• Can reduce compressor short-cycling and high-temperature cutouts caused by poor condenser airflow

• One blower wheel as pictured

• Disconnect power before beginning any repair to avoid shock or injury
• Basic disassembly of the condenser housing or shroud may be required; keep track of screws and fasteners
• Inspect the motor shaft and mounting hardware for wear; replace any damaged clips or fasteners
• Test operation after reassembly to ensure the wheel runs true and the noise/airflow issue is resolved

This heater blower wheel cover directs heated air from the dryer's heating assembly into the blower path and helps protect the blower wheel and heater chamber. Replacing a damaged cover restores proper airflow routing and reduces operational issues. What it does:

• Channels heated air from the heater to the blower for consistent drying performance
• Shields the blower wheel and heating components from debris and lint buildup
• Helps prevent airflow leaks that can cause long dry times or uneven drying
• Reduces rattling or scraping noises caused by a damaged or warped cover

• Disconnect power to the dryer before beginning any service work
• Follow the appliance's service manual for correct removal and reinstallation procedures
• Inspect surrounding seals and the blower wheel for damage while the cover is removed
• Use care handling sheet-metal parts; wear gloves to avoid cuts

These stainless steel mounting screws secure the refrigerator float switch assembly for reliable water-level sensing and ice-maker operation. Corrosion-resistant hardware helps maintain proper switch positioning and long-term fit. What it does:

• Fastens the float switch to the refrigerator cabinet or housing so the switch can detect water/ice levels
• Stainless steel resists corrosion in moist appliance areas
• Keeps the float switch stable to prevent intermittent or false water-level readings
• Small hardware replacement that restores proper switch mounting after service or damage

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver and avoid overtightening to prevent stripping or cracking plastic parts
• Keep hardware and fasteners out of reach of children; replace any damaged mounting features