Parts for Ge JGRS06BEJ2BB: Body Parts

This lower limit switch is the replacement lock-position switch used on the appliance door/lock assembly to restore proper lock sensing and control operation. Replaces a worn or failed lower lock switch to help the unit recognize door lock position. What it does

• Detects the lower/locked position of the door latch so the control can allow oven/cook functions
• Stops appliance operation or shows lock-related faults when the door isn't secured
• Commonly fails after wear, leading to lock faults, inability to start, or door-lock errors
• Works as the electrical sensor portion of the door/lock mechanism

• One lower limit switch (lock)

• Disconnect power to the appliance before starting any service
• Replacement may require removing the door or access panel and detaching the lock/latch assembly
• Handle small fasteners and electrical connectors carefully; note connector locations before removal

This broil drawer assembly replaces a worn or damaged lower oven drawer broiler so the drawer opens/closes smoothly and supports proper broiling. Designed to restore safe, reliable broiler-drawer operation. What it does

• Replaces the broil drawer slide and roller hardware so the drawer moves smoothly and stays aligned.
• Supports proper heat exposure and positioning for broiling functions.
• Helps eliminate sticking, grinding, or uneven drawer movement.
• Fits the oven's lower drawer housing to maintain intended drawer performance.

• High-level replacement: remove drawer, detach old assembly, install new assembly, then reinstall drawer.
• Disconnect power to the appliance before starting work to avoid electrical shock.
• Use basic hand tools; keep fasteners and small parts organized during disassembly.

The Oven Rack is an OEM part for GE ovens. This sturdy and durable rack is designed to fit securely in the oven's interior, providing a stable surface for baking and roasting. It is adjustable, allowing you to customize the cooking space to accommodate various dish sizes and ensure even heating.

Common causes of a bad oven rack include warping from prolonged exposure to heat, bending under heavy cookware, or rust and corrosion from moisture.

Symptoms of a bad oven rack include:

• Difficulty in sliding the rack in and out
• Warped or bent rack affecting stability
• Rust or corrosion on the rack's surface
• Inconsistent cooking results due to uneven rack positioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This broiler pan grid is the oven rack insert that holds food above the broiler pan to promote even browning and allow drippings to drain away. It restores proper airflow and keeps food elevated while broiling. What it does:

• Provides a stable rack to elevate food over the broiler pan for even browning and charring
• Allows grease and juices to drain into the pan below, helping reduce smoke and flare-ups
• Replaces warped, rusted, or missing broiler grids that can cause uneven cooking
• Works with the matching broiler pan to maintain correct cooking distance from the broiler element

• No special tools required; place the grid into the matching broiler pan and position in the oven as needed
• Ensure the oven is cool and power is off before handling or installing parts
• Inspect for secure seating before use to prevent tipping or contact with the broiler element
• Clean before first use and follow oven manufacturer cleaning guidelines

The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly. 

Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.

Symptoms of a bad Oven Sensor Assembly include:

• The oven temperature is inconsistent with the setting
• Food is not cooking evenly or as expected
• The oven fails to heat to the set temperature
• Error codes appearing on the oven display related to temperature regulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This oven lamp holder is the replacement socket that secures and powers the interior oven light, restoring safe illumination for checking food without opening the door. Designed to fit industry-standard oven lamp bulbs. What it does:

• Provides a secure electrical connection and mounting point for the oven light bulb
• Enables interior oven illumination so you can monitor cooking without opening the door
• Commonly replaces cracked, burned, or loose lamp sockets that cause the light to flicker or not work
• Works with the oven's existing wiring and bulb type

• Disconnect power to the appliance at the breaker before servicing to avoid shock
• Replace only when the oven is cool; use gloves to protect hands and bulb surfaces
• Inspect wiring and connectors for damage; replace any damaged wiring per OEM guidance

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

• Diminished light output, making it hard to see inside the oven
• Cracks or damage to the lens itself
• Discoloration or cloudiness that cannot be cleaned off
• The lens becoming loose or falling off

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This light cup support secures the interior lighting assembly and helps position the light socket and lens for reliable illumination. It restores proper alignment and contact for the refrigerator or freezer interior light. What it does:

• Holds the light socket and lens in place to prevent shifting or detachment
• Ensures consistent light alignment so the bulb illuminates the interior correctly
• Addresses symptoms like a loose or hanging light, intermittent contact, or misaligned lens
• Compatible with common GE refrigerator interiors where the original cup support is used

• One light cup support

• Disconnect power before accessing the interior light assembly to avoid shock
• Remove the old cup support by unsnapping or unfastening retaining tabs as required
• Press the replacement into position until retaining tabs engage; test light function before reassembling shelves

This right-side oven door hinge secures and guides the door as it opens and closes, restoring proper alignment and smooth movement for safe, reliable oven use. Designed for direct replacement of the factory right hinge. What it does:

• Supports the right side of the oven door so it opens and closes smoothly
• Maintains correct door alignment and gap to ensure a proper seal
• Can resolve door sag, uneven closing, or binding when the hinge is worn or damaged
• Works with existing door components and mounting hardware

• One (1) right-side oven door hinge

• Disconnect power to the oven and allow the appliance and door to cool before starting
• Support the door while removing hinge mounting screws to prevent dropping or damage
• Keep original screws and check their condition; replace if stripped or damaged
• After installation, carefully check door alignment and operation; minor adjustments may be required

This is a replacement door hinge that restores secure, stable opening and closing for compatible appliance doors. It provides a direct-fit repair to stop sagging or misaligned doors and improve safe operation. What it does:

• Supports and guides the appliance door for smooth open/close operation
• Replaces worn or bent hinge hardware that causes door sag or uneven gaps
• Helps stop rubbing, catching, or scraping when the door moves
• Restores proper door alignment that can affect sealing and function

• One replacement hinge

• Disconnect power (or unplug) and shut off water if applicable before starting repairs
• Inspect mounting screws and strike plates; replace any damaged fasteners for secure fit
• Tighten hardware evenly and check door alignment during reassembly

This replacement tension spring restores proper tension where the original spring has stretched, broken, or lost load. Use it to help doors, latches, or assemblies operate smoothly and return to their intended position. What it does:

• Provides restoring force to maintain proper tension in the related door, latch, or linkage.
• Replaces worn or broken springs that cause sagging, loose movement, or failure to stay closed.
• Helps eliminate excessive play or noisy operation related to a failed spring.
• Matches the original fit and function when the correct part number is used.

• Turn off and unplug the appliance before attempting any repair to avoid shock or injury.
• Handle under tension carefully; springs can release energy suddenly—wear eye protection and gloves.
• Inspect mating hardware (hooks, anchors, hinges) and replace if damaged to ensure proper performance.

This adjustable leveling leg raises and stabilizes the appliance to ensure it sits squarely on uneven floors, improving operation and preventing rocking. Designed as a direct replacement to restore proper height and stability. What it does:

• Supports appliance weight and lets you adjust height to level the unit
• Restores a stable, wobble-free fit on uneven or sloped floors
• Helps keep doors, drawers and sealing surfaces aligned for proper operation
• Common symptom fixes: appliance rocks, sits unevenly, or door/drawer alignment is off

• One adjustable leveling leg

• Unplug the appliance (and shut off water/gas if applicable) before working underneath it
• Tip or raise the unit slightly with appropriate support to access leveling leg safely
• Thread the leg in or out to adjust height; use pliers or a wrench only if needed
• Check appliance level after adjustment and test for stability before normal use

This is the replacement front frame panel that restores the appearance and protective trim around an oven door. It gives a clean, finished look and helps protect the door edges from chips and wear. What it does:

• Replaces a cracked, dented, or scratched oven door front frame
• Restores a flush, finished edge around the oven door for improved appearance
• Helps keep door components and seals aligned and protected
• Can reduce drafts or gaps caused by damaged trim that affect door fit

• Install requires removing the oven door or loosening door fasteners; follow the appliance manufacturer's service instructions.
• Use proper tools and keep track of all screws and clips; some fasteners may be reused.
• Disconnect power to the appliance before starting any repair to avoid electrical hazards.
• If the door is heavy or awkward to handle, have a helper to support the door during removal and reinstallation.

This is a replacement black screw used to secure interior or exterior appliance components. It provides a discrete, color-matched fastener to restore proper fit and stop rattles or loose panels. What it does

• Fastens trim, panels, brackets or control components where a small black screw is required
• Restores secure mounting to eliminate vibration, rattling or misaligned parts
• Matches finished appliance surfaces for a clean, unobtrusive look
• Simple hardware replacement for small fastener loss or damage

• One black screw

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver to seat the screw; avoid overtightening to prevent stripping or cracking surrounding material
• Keep track of small fasteners during disassembly and handle with care
• Replace with the exact part number if the original screw is damaged or the thread/length differs

ST10-16 X 7/16"

This black-finished screw secures appliance panels, brackets, or trim in place. Replacing a missing or damaged fastener restores a solid fit and helps prevent rattling, gaps, and loose components.

• Fastens panels, trim, brackets, or covers on the appliance
• Helps maintain proper alignment and reduces vibration noise
• Common replacement when the original is lost, stripped, rusted, or broken
• Symptoms include loose or wobbly parts, rattling, or visible gaps

• Disconnect power; for gas appliances, also shut off the gas supply
• Allow hot surfaces to cool before servicing
• Start threads by hand to avoid cross-threading, then tighten snugly—do not overtighten
• Reuse any original washers or spacers in the same order and location

Replacement fastener used to secure appliance components. If a screw is missing or damaged, panels and brackets can loosen or rattle. Installing a new screw restores a tight fit and helps keep parts properly aligned.

• Fastens panels, brackets, or internal components as designed for the model
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration/rattling and restores proper fit
• Maintains alignment and a secure assembly after service

• Disconnect power; shut off gas if applicable before servicing
• Support components while removing/installing fasteners
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace all required screws in a location for even clamping and proper fit

This flat-head 10-32 zinc screw secures panels and components on compatible appliances, providing a corrosion-resistant fastener for reliable mechanical fastening. Use when replacing stripped or missing panel screws to restore proper fit. What it does:

• Fastens control panels, trim, or small appliance components with a 10-32 thread size
• Zinc plating helps resist rust and wear in typical household environments
• Replaces missing, damaged, or stripped flat-head screws that prevent panels from seating correctly
• Fits applications that require a countersunk/flush head for a clean finish

• Use the correct 10-32 driver bit and moderate torque to avoid stripping the head or threads
• Ensure the screw is the correct length and head style for your application before tightening
• Disconnect power to the appliance and follow OEM safety instructions before servicing