Parts for Whirlpool GC900QPPB7: Cabinet And Control Parts

Color: Black

Color: White

Size: 8 x 1/2 ab.

To order knob for this switch use WP4155141.

May also be called a key. Color: Red.

Color: White.

Color: Black

Color: Black

Color: White

Color: Black

This off switch is a small electrical switch that opens the circuit to stop a function or cycle when triggered by the appliance's mechanism or control. Replacing a worn switch restores reliable shutoff and consistent operation. What it does:

• Interrupts power to stop operation when actuated by a lever, cam, or latch
• Sends an "off" signal to the control for proper shutdown
• Helps correct issues like a function that won't shut off or stops intermittently
• Can resolve situations where jiggling a door/lever is needed to make a function stop

• 1 off switch

• Disconnect power (unplug or switch off the circuit breaker) before servicing
• Access the switch, note wire positions, and transfer wires terminal-for-terminal
• Mount the new switch securely; avoid bending the actuator more than necessary
• Restore power and test operation before full reassembly

Color: White

Escutcheon restores the finished look of your appliance while protecting control switches and openings from grease, spills and debris. Use it to replace cracked, damaged or missing trim. What it does:

• Covers and protects control components and switch openings from moisture, food and debris.
• Restores the appliance's cosmetic appearance and helps secure knobs and switches.
• Common repair for cracked, warped or missing trim that leaves controls exposed.
• Reduces rattling or loose-feeling control panels by providing a snug trim fit.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the trim carefully to avoid scratching the finish; use proper screwdrivers and a trim tool as needed.

A small replacement button plug that fills a control-panel opening and restores a finished appearance while keeping out dirt and moisture. Fits neatly into the panel for a clean, factory look. What it does:

• Covers unused or damaged button openings on the appliance control panel
• Prevents debris, crumbs, and moisture from entering the control cavity
• Restores the panel's finished appearance and helps keep controls sealed
• Useful when a button is missing, broken, or removed during repairs

• Press the plug firmly into the panel opening until it snaps or seats flush
• No special tools required for most installs; small flat tool can help align if needed
• Avoid forcing the plug to prevent panel damage; check fit before final seating
• Disconnect power to the appliance before removing control panels or working near wiring

This is a replacement machine screw sized 8-18 x 3/8 that secures panels and components on compatible appliances. It restores proper fastening where a worn, stripped, or missing screw causes loose parts or rattling. What it does

• Fastens control panels, trim pieces, or brackets to the appliance chassis
• Replaces stripped, corroded, or missing screws that cause loose panels or vibrating noise
• Provides correct thread engagement for a secure hold in tapped holes
• Small hardware solution often used during door, console, or interior repairs

• One 8-18 x 3/8 machine screw (quantity: 1)

• Use the correct screw size and thread; do not force a different-size fastener into tapped holes
• Hand-start the screw to avoid cross-threading, then tighten with the appropriate screwdriver
• Disconnect power before accessing internal components or panels on electrical appliances
• If metal threads are damaged, repair with a helicoil or replace the damaged component rather than over-torquing

This white PC-900 panel insert replaces a worn, cracked or missing trim piece on compatible Whirlpool control panels. It restores a clean finished appearance and provides a stable surface for buttons and mounting clips. What it does:

• Covers and protects openings in the appliance control panel to help keep out dust and debris.
• Provides a flush mounting surface for buttons, switches and retaining clips.
• Restores cosmetic appearance when the original insert is cracked, chipped, discolored or loose.
• Helps maintain proper button alignment and prevents gaps around controls.

• Disconnect power to the appliance before beginning any service.
• Remove the control panel bezel or screws as required to access the insert; gently release retaining clips to avoid damage.
• Align the insert with mounting points and snap or fasten into place; verify buttons move freely.

This replacement insert fits into the designated recess on your appliance to secure and finish the related component. Replacing a worn or missing insert restores a tight, proper fit and a clean, factory look. What it does

• Seats within its mating part to support, align, or finish the assembly
• Restores a secure fit when the original insert is cracked, deformed, or missing
• Helps reduce looseness, rattles, and visible gaps
• Visual cues include cracking, distortion, or pieces breaking off

• 1 insert

• Disconnect power and shut off any applicable utilities before servicing
• Use your model's diagram to locate the insert and note its orientation
• Remove the damaged insert; clean the mating area; press or snap the new insert fully into place
• Reassemble and test the related component for proper fit and function