Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
2 Pack
Mounting screw for securing oven components and panels. Replace if stripped, corroded, or missing during appliance repair or maintenance work.
Usually ships within 4 - 14 days
Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.
Plastic bushing that fits inside your washer's lid hinge for smooth pivoting. Replace if worn, cracked, or causing lid misalignment and squeaking.
Double-style bushing supports the washer lid hinge pin. Replace worn or cracked bushings to restore smooth, quiet lid operation and proper alignment.
Replacement door hinge that supports and guides your washer door during opening and closing. Needed when original hinge is bent, broken, or worn.
Wireform hinge connects the washer door to the main body for smooth opening and closing. Replace if cracked, bent, broken, or door won't stay attached.
Replacement screw secures panels, brackets, and trim on washers, dryers, and refrigerators. Needed when original fasteners are stripped or missing.
Secures and organizes internal dryer wiring to keep wires properly positioned. Replace if broken, missing, or worn to prevent wire tangles or damage.
Replacement plug insert for washer control panels and cabinet surfaces. Snaps into pre-drilled holes to cover openings or secure components. Needed when original plug is missing, cracked, or broken.
Left apron bracket for washers. Secures the apron panel to the washer cabinet. Replace if cracked, broken, or missing to restore proper panel support.
Right side apron bracket for washers. Secures the apron panel to the washer cabinet. Replace if cracked, bent, or broken to restore proper panel support.
Converts older 3-piece washer support apron to one-piece design. Replaces sagging, bent, or broken apron brackets that cause motor clearance issues.
Replacement mounting screw for refrigerators. Secures panels, brackets, and components. Needed when original screws are stripped, missing, or lost.
Replaces broken or worn tub dampening straps that stabilize your washer's inner tub during operation. Restores proper suspension to reduce vibration.
Holds tub dampening straps in place on your washer. Replace if cracked, broken, or worn from heavy loads. Includes installation video guide.
Secures control knobs onto shafts in top-load washers. Replace when knobs slip or fall off to restore proper fit and operation. Verify compatibility.
Secures washer drum and internal components during transport to prevent movement and damage. Replace if missing, bent, or broken before moving your appliance.
Push-in plug button for top-load washers. Snaps into trim openings to cover unused holes and restore a clean finish. Replace if cracked or missing.
Grounding clip for top-load washers ensures proper electrical grounding. Replace if damaged, corroded, or missing to maintain safe operation. Verify fit with your washer model number before ordering.
Grounding stud for top-load washers. Connects electrical ground wire to washer frame. Replace if stripped, corroded, or missing for proper grounding.
Alignment pin keeps washer door hinge positioned so the door closes evenly. Replace if cracked, bent, or missing to restore proper door fit and seal.
Hex washer head screw for washer pedestals. Secures pedestal components and panels. Replace if screw is stripped, missing, or damaged during assembly.
6-20 x 3/8 in. screw secures panels and brackets inside washers. Replaces missing, stripped, or damaged fasteners to restore proper fit and stability.
Snap-in plastic clip cover that conceals fasteners and secures panels on your top-load washer. Replace if broken or missing to restore appearance.
Self-leveling bracket for top-load washers. Mounts to the base to stabilize the unit. Replace if broken, bent, or missing to restore proper leveling.
Protective conduit sleeve for washer electrical wiring. Installs between control panel and base. Replace if cracked, worn, or missing to protect wires.
White finished cover assembly for washer control panel. Replaces cracked, discolored, or broken covers. Installs on top of washer housing unit.
Replacement lid assembly for your washer's top opening. Installs on the cabinet top. Order when your original lid is cracked, damaged, or missing.
Replacement mounting screws for washer cabinet panels, tub straps, and control assemblies. Sold in 12-pack. Replace stripped, rusted, or missing screws.
Mounting screw for top-load washers. Secures tub straps, cover panels, and internal components. Replace if missing, stripped, or damaged during repair.
Base assembly for your washer. Supports and stabilizes the internal cabinet structure. Replace if cracked, warped, or damaged from moving or wear.
Adjustable leveling leg threads into washer base to stabilize cabinet and reduce vibration. Replace if cracked, broken, or missing for proper support.
This nut and bracket assembly secures appliance components and restores proper alignment and stability. It's a direct-replacement mounting fastener used where a bracket and mating nut are required for secure attachment. What it does:
Replace missing or stripped mounting screws in your refrigerator. This 12-pack of 8-32 thread screws secures panels, brackets, and components.
Fix a range that shuts off unexpectedly or won't power on with this terminal block kit. Connects power supply wiring to your appliance's main components.
Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.
Secures your washer's drain hose to standpipe, maintaining proper air gap to prevent siphoning and backflow. Replace if clip is broken or missing.
Replaces a damaged or worn washer hose and spring assembly. Installs in the drum area. Order this part if your original hose is cracked or leaking.
This replacement adapter connects two mating appliance components to restore a secure fit and correct alignment. It replaces a worn or damaged adapter to reduce rattling and prevent loose or misaligned parts that can affect operation. What it does
The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.
Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.
Symptoms of a bad drain hose clip include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Note: For the entire drain hose, use part number WH41X10096.
Mounting screw for washer components. Secures drain hose clamps, panels, and internal parts. Replace if missing, stripped, or lost during repair.