Parts for Frigidaire GMOS1266AFA: Cabinet,Oven Parts

This replacement cover protects and finishes a specific component area on your appliance. Replacing a cracked or missing cover helps keep out debris, restores proper protection, and maintains a clean, factory appearance.

• Shields the underlying assembly from dust and accidental contact
• Maintains proper enclosure as designed by the manufacturer
• Direct replacement when the original is cracked, warped, or missing
• Typical symptoms include a loose or rattling panel, broken tabs, or exposed parts

• Disconnect power before servicing; also shut off gas/water if applicable
• Note screw/clip locations and orientation for correct reassembly
• Transfer any reusable hardware from the old cover
• Do not overtighten fasteners into plastic to avoid damage

This electronic control board manages the refrigerator's core functions and cycle timing so the appliance maintains set temperatures and runs defrost and compressor cycles correctly. It replaces a failed or unresponsive main control. What it does:

• Regulates compressor and defrost cycle timing for proper cooling performance
• Receives inputs from temperature sensors and user controls to adjust operation
• Manages electronic display and control responses when present
• Can resolve symptoms like no cool, erratic cycling, or unresponsive controls

• Always unplug the appliance before accessing electrical components
• Handle the board by the edges and avoid static discharge; use an anti-static wrist strap if available
• Basic hand tools may be required; confirm panel removal steps for your model

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

The Thermostat is an OEM part for Frigidaire microwaves. Situated near the top of the microwave cavity, it accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This refrigerator thermostat regulates the cooling cycle to help maintain set temperatures and stable food storage. It replaces a failed control to restore normal compressor cycling and temperature response. What it does:

• Senses cabinet temperature and signals the compressor and evaporator fan to run or stop
• Can stop excessive cooling or continuous running when the control is faulty
• Helps correct symptoms like inconsistent temperatures, warm compartments, or a compressor that runs constantly
• Works as the user-adjustable control behind the temperature knob or dial

• Disconnect power to the appliance before beginning any work
• Handle the capillary tube and sensor gently; avoid kinking or sharp bends
• Verify electrical connections match the replacement part and secure terminals firmly

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

The fuse is a protective link in the appliance's power circuit. When excessive current or a short is detected, it opens the circuit to help safeguard wiring and electronics. A blown fuse often leaves the unit completely unresponsive.

• Interrupts power during an overcurrent or short to prevent further damage
• Helps protect control boards, motors, and wiring
• Typical symptoms: no power, blank display/controls, won't start
• Tests open (no continuity) when blown

• Disconnect power at the breaker or unplug before servicing
• Replace only with the same type and rating specified by the manufacturer
• If a new fuse blows again, locate and correct the underlying short or failed component before further use
• For microwave repairs, high-voltage capacitors can retain a dangerous charge.

This replacement refrigerator water filter cartridge helps restore clean tasting water and ice by trapping common impurities. Designed as a direct-fit replacement to maintain your fridge's filtered water supply and improve taste clarity. What it does:

• Filters particulates and common contaminants to improve water and ice taste
• Helps reduce visible sediment and cloudiness from the dispenser and ice maker
• Restores normal dispensing performance when an old filter causes off-flavors or odors
• Supports consistent filtered water flow when installed and maintained

• Turn off the water supply and follow the refrigerator's filter-replacement instructions before starting
• Push/rotate or slide per your model's procedure until the filter locks in place; ensure a secure seal
• Run water through the dispenser for a short time after installation to flush air and initial carbon fines
• Replace regularly per the refrigerator manufacturer's recommendation or sooner if flow decreases or taste returns

The Lamp is an original and genuine OEM replacement part for Frigidaire microwaves. It is located inside the microwave and provides light to easily see food and monitor cooking progress.

Causes of a bad lamp can be natural bulb burnout over time, damage from foods accidentally jostling the lamp during cooking, or general wear and tear.

Symptoms of a bad lamp include:

• Dimming or flickering light inside the microwave when in use
• No light turning on when the microwave is powered on
• Broken or cracked bulb housing

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

This infinite switch controls the heat level for an electric cooktop surface burner, restoring adjustable power to the element for even cooking and reliable temperature selection. What it does:

• Regulates electrical power to a single surface heating element so you can set low-to-high heat.
• Provides stepped "infinite" control positions rather than a simple on/off.
• Replaces a worn or failed control that causes a burner to not heat, stay stuck on one setting, or heat inconsistently.
• Uses standard spade-terminal connections found on many electric ranges.

• Disconnect power at the breaker before servicing—this part services live-voltage circuits.
• Access typically requires removing the cooktop or rear console; handle ceramic glass cooktops carefully to avoid cracking.
• Confirm terminal layout and mounting orientation before removal; take a photo of wiring for reassembly.

This replacement lever is the small actuator that engages control linkages so doors, latches or dispenser mechanisms move and stay in position. Replacing a worn or broken lever restores reliable mechanical operation and alignment. What it does:

• Transfers motion from a handle or control cam to the linked mechanism
• Helps door/latch/dispenser engage and stay in the correct position
• A damaged or cracked lever can cause sticking, poor latching, or intermittent operation
• Commonly fails from wear, impact, or plastic fatigue

• Disconnect power to the appliance before beginning work to avoid injury
• Removal typically requires basic hand tools; keep fasteners for reuse
• Handle small plastic parts carefully to avoid damage during installation
• Test the mechanism through a full cycle after installation to ensure proper engagement

This replacement control switch completes an internal circuit to enable and regulate an appliance function. It restores reliable on/off or selector operation so the appliance responds correctly to user inputs. What it does

• Acts as the electrical contact that opens or closes a circuit to start or stop a function.
• Commonly linked to symptoms such as the appliance not powering on, a function not engaging, or intermittent operation.
• Replaces a worn, burnt, or unresponsive switch to restore normal control responsiveness.
• Works as a direct-fit electrical replacement when the original switch is faulty.

• One replacement switch.

• Disconnect power to the appliance before inspecting or replacing the switch to avoid shock.
• Verify the old switch matches the new part visually and by terminal layout before installation.
• Use basic hand tools; avoid forcing connectors—ensure firm, correct terminal connections.

This evaporator fan motor circulates cold air across the freezer evaporator and through the fridge, helping maintain even temperatures and proper cooling. Replaces a failed fan motor to restore airflow and reduce frost buildup. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and fresh-food compartments
• Restores airflow when the fan has stopped running or runs intermittently
• Helps prevent uneven cooling and excessive frost on the evaporator coil
• Can reduce unusual noise if the old motor is noisy or worn

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior freezer panels or back panels; use proper tools and keep fasteners organized
• Handle sharp sheet metal and insulated components carefully; wear gloves and eye protection

This air damper control assembly regulates cold-air flow from the freezer into the refrigerator compartment to help maintain even temperatures. Replacing a worn or stuck damper restores proper airflow and helps correct temperature imbalances. What it does:

• Opens and closes the fresh-food air inlet to control freezer-to-fridge airflow.
• Helps stabilize refrigerator compartment temperature when cycling between modes.
• Commonly replaced for stuck, noisy, or non-responsive dampers that cause warm or uneven cooling.
• Works with the fridge control system to modulate airflow based on temperature demand.

• Disconnect power to the appliance before starting any repair.
• Handle the assembly and plastic actuator gently to avoid damage.
• Secure all mounting screws; do not overtighten.
• Test function after reassembly by restoring power and verifying damper movement during a cooling cycle.

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

This ring is a small retainer used to secure mating parts in place so assemblies stay aligned and move as intended. It helps restore proper fit and function to the affected appliance area. What it does:

• Holds or retains shafts, pins or small components to prevent lateral movement
• Restores secure connection where a worn or missing ring allowed looseness
• Can reduce noise or misalignment caused by a missing retainer
• Works as a simple mechanical fastener in the specified assembly

• One ring/retainer

• Inspect surrounding components for wear before installation and replace any damaged parts
• Use appropriate tools to avoid deforming the ring; do not force into position
• Disconnect power to the appliance and follow safety procedures before accessing internal parts

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Vent Damper is an OEM part for Frigidaire microwaves. It is designed to control the flow of air through the microwave’s ventilation system, ensuring proper ventilation during operation. This component helps to prevent the backflow of air, keeping the microwave's interior and its surroundings free from unwanted odors and heat.

Causes of a bad vent damper can include wear and tear over time, accumulation of grease or debris, or damage from external impact. 

Symptoms of a bad vent damper include:

• Poor ventilation
• Unusual odors lingering around the microwave
• Excessive heat buildup
• Increased noise during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Mounting Bracket is an OEM part for Frigidaire microwaves. This part securely attaches the microwave to the wall or cabinetry. This bracket is designed to ensure that your microwave is mounted safely and remains stable during operation, preventing any potential movement that could lead to damage or operational issues. 

Causes of a bad Mounting Bracket can include physical damage from improper installation or accidents, wear and tear over time that weakens the bracket's integrity, and corrosion due to exposure to moisture or kitchen vapors, which can compromise its strength and stability.

Symptoms of a bad Mounting Bracket include:

• The microwave tilting or sagging
• Unusual vibrations or noise during operation, indicating that the microwave is not securely fastened
• Visible damage or rust on the bracket itself, which could weaken its support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.