Need Help?
Call or text
Show parts
Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.
Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.
Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.
This part is discontinued by the manufacturer and is no longer available for purchase.
Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.
Leveling leg assembly stabilizes and levels your refrigerator cabinet. Replace worn, stripped, cracked, or broken legs to eliminate rocking and vibration.
Replacement air duct for bottom-mount refrigerators. Routes cold air between compartments. Replace if cracked, broken, or causing poor airflow distribution.
Usually ships within 4 - 14 days
Covers and protects the door hinge area on your refrigerator. Replace when cracked, chipped, or missing to restore appearance. Verify fit with your model.
Replaces a worn, cracked, or broken refrigerator door hinge assembly. Installs on the door frame to restore proper alignment and smooth operation.
Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.
Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.
NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.
Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.
Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.
Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.
Fix a noisy or vibrating refrigerator with this compressor base assembly. Supports and secures the compressor for proper cooling. Moderate DIY repair.
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Drip pan for refrigerators. Installs beneath the appliance to collect condensation. Replace if cracked, warped, or missing to prevent water damage.
Drain tray assembly that collects condensation under your refrigerator. Replace if the original tray is cracked, broken, or missing to prevent leaks.
Fan guide for refrigerators. Mounts to the evaporator or condenser fan assembly. Replace if cracked, broken, or missing to ensure proper airflow.
Refrigerator not cooling properly? A faulty condenser wire assembly disrupts heat removal. This replacement part restores proper refrigeration function.
Fix a refrigerator not cooling properly with this evaporator fan assembly. Common solution for warm fridge or freezer compartments. DIY-friendly repair.
Fix a noisy or non-working refrigerator fan that's causing ice buildup or warm temperatures. This motor replacement restores proper airflow in 30-60 minutes.
Freezer frosting over or refrigerator not cooling? A damaged evaporator fan blade disrupts airflow. This replacement restores circulation and temperature.
Covers and protects the refrigerator fan while directing airflow. Replace if cracked, broken, or missing to restore proper cabinet air circulation.
Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.
Refrigerator not cooling evenly or freezer too warm? A failed DC motor stops air circulation. This motor ensures proper airflow for consistent temps.
If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.
Freezer too cold while fridge is warm? This damper motor support controls airflow between compartments. Common fix for temperature imbalance issues.
Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Interior light won't turn on when door opens? This refrigerator door switch signals when the door opens or closes. DIY-friendly repair, takes about 5 minutes.
Fix a noisy or non-functioning evaporator fan with this refrigerator motor mounting bracket. Secures the circulation fan motor in the freezer compartment.
Replace your refrigerator's LED backlight assembly to restore even interior lighting. Install when lights dim or fail. Verify fit with your model number.
Replace your refrigerator's LED light assembly when interior lighting dims or fails. Restores bright, energy-efficient illumination. Verify fit with model number.
LED assembly backlight strip for refrigerators. Restores even interior lighting and improves visibility. Replace when lights flicker or fail. Confirm fit with your model number before ordering.
Compressor humming but not starting? This start capacitor provides stable starting power to your refrigerator compressor. DIY-friendly repair.
Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.
Power cord assembly for refrigerators. Connects your appliance to the electrical outlet. Replace if cord is frayed, damaged, or missing prongs.
Dryer not heating or taking too long to dry? This heating element generates hot air to dry clothes. Common fix for poor heating performance.
Fix refrigerator not cooling or warm temperatures with this compressor sealing pipe. Seals refrigerant lines to maintain proper pressure and cooling.
Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.
Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.
Refrigerator not cooling or defrosting properly? This main control board manages temperature and defrost cycles. Common fix for electrical failures.
This lamp cover protects and diffuses the refrigerator interior lamp, restoring even illumination and protecting the lamp from spills and contact. It replaces a cracked, yellowed or missing cover for improved light quality and safety. What it does:
Ice maker stopped working or not making ice? This 12-cube ice maker assembly replaces failed units. DIY-friendly installation takes 10-30 minutes.
Fix exposed or damaged sensor areas with this refrigerator sensor cover assembly. Clips into place with a simple screwdriver removal. Quick 5-minute fix.
Secures and seals the water filter cartridge to supply lines. Replace if leaking, cracked, or dispensing poorly. Confirm fit with your model number.
Fix water dispenser leaks or slow flow with a new refrigerator water reservoir. Stores chilled water inside the fresh food section for steady dispensing.
Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.
Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.