Parts for Kitchenaid KFGC558JSC02: 48" Chassis Parts

This replacement roller fits the front or rear position of a slide mechanism, restoring smooth, even movement and reducing noise when a wheel is worn or broken. It helps racks or drawers glide properly and stay aligned. What it does:

• Provides low-friction rolling support for the slide track
• Helps slide-out assemblies move freely without binding or scraping
• Worn or damaged rollers can cause sticking, squeaking, or uneven travel
• Restores proper alignment and smooth operation when replaced

• 1 roller assembly

• Disconnect power and allow the appliance to cool before servicing
• Remove the slide-out assembly; note roller orientation and hardware
• Transfer/reuse existing screws, clips, or retainers as required
• Do not lubricate unless the manufacturer specifies a lubricant

This ground screw secures the appliance's grounding wire or strap to the chassis or terminal area, creating a reliable bonding point. Replace a missing or damaged screw to restore a proper ground connection during installation or service.

• Provides the designated bonding point for the grounding wire/strap
• Fastens to the frame or terminal area using 8-32 machine threads
• Helps maintain a consistent ground path for safe operation
• Typical reasons to replace: stripped head/threads, corrosion, or a missing screw

• Disconnect power at the breaker or unplug the appliance before servicing
• Route the ground wire/strap to the specified grounding location
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Ensure the ground connection is secure and complies with local electrical codes before restoring power

This pressure regulator tube connects the gas pressure regulator to the appliance's gas system, directing fuel flow for safe operation. It's a direct-replacement gas line component used when the existing tube is damaged, bent, or leaking. What it does:

• Channels gas from the pressure regulator to the appliance's burner assembly.
• Restores a sealed, rigid gas connection when the original tube is cracked, corroded, or deformed.
• Helps prevent gas leaks and maintains intended regulator routing when installed correctly.
• Commonly replaced if you see visible damage, corrosion, or a persistent gas smell near the connection.

• Turn off gas supply and electricity to the appliance before attempting any repair.
• Inspect fittings and use appropriate thread sealant or gaskets as specified by manufacturer instructions; do not modify the tube.
• After installation, perform a leak test per local codes and manufacturer guidelines before putting the appliance back into service.

The Oven Gasket is an OEM component specifically designed for Whirlpool ranges. This gasket measuring 75.40 inches seals the oven door, preventing heat from escaping and maintaining optimal cooking temperatures inside the oven cavity.

Causes of a bad gasket include warping, cracks or tears that compromise the seal overtime due to repeated exposure to high heat.

Symptoms of a bad gasket include:

• Inefficient or uneven cooking
• Lower than expected oven temperatures
• Escaping heat from around the oven door
• A worn/damaged appearance

This Whirlpool OEM replacement gasket is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models. 

This pressure regulator controls and stabilizes the gas flow to the appliance, helping the burner maintain a steady, correct flame for reliable heating and cooking performance. What it does

• Regulates gas pressure to the appliance's burner assembly for consistent ignition and flame size
• Can correct low or uneven burner flames when the regulator is failing
• Helps prevent frequent burner shutdowns and poor temperature control linked to pressure issues
• Works as part of the appliance's fuel delivery system to ensure safe, steady operation

• One pressure regulator

• Turn off the gas supply and disconnect power before attempting service
• Use proper gas fittings and thread sealant rated for gas lines; check for leaks after installation

This genuine replacement screw secures appliance panels and components, restoring proper fit and stopping movement. Use it when a missing or damaged fastener causes loose trim or rattling. What it does

• Secures panels, brackets, and small assemblies to restore proper fit
• Helps eliminate rattling, vibration, or misaligned trim caused by a missing or stripped screw
• Replaces lost or damaged fasteners during maintenance or part replacement
• Matches OEM fit for reliable fastening where specified in diagrams

• Use the matching screw location shown in the appliance diagram; do not force or overtighten
• Use the correct screwdriver or bit to avoid stripping the head
• Disconnect power and follow appliance safety procedures before accessing internal components
• If threads are damaged, replace with the correct OEM fastener rather than reusing a compromised hole

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This small plastic clip secures appliance panels, trim, or wiring to prevent movement and rattling, restoring proper fit and quiet operation. It's a simple, low-cost part that helps keep components held in place. What it does:

• Acts as a retainer to hold panels, trim pieces, or harnesses in position
• Prevents rattling, vibration noise, and loose or misaligned parts
• Helps maintain proper spacing and alignment of adjacent components
• Commonly replaced when clips are broken, cracked, or missing

• One clip/retainer

• Disconnect power (and water if applicable) before beginning any work
• Clip typically snaps into place; may require a flat screwdriver or trim tool to remove/install
• Inspect surrounding mounting points for damage before fastening replacement clip
• Replace all corresponding fasteners for even fit

The Cover Foot is an OEM part for Whirlpool ranges. Attaching to the bottom front panel, it provides protection and support for the range. Made of durable metal, the cover foot encases leveling legs or glides to safeguard them from scraping or impact damage. 

Symptoms of a bad cover foot include dents, scratches, or cracks that expose leveling components. 

Causes can be hits or abrasions incurred during installation, moves, or cleaning. 

Problems with a faulty cover foot consist of:

• Risk of injury from exposed leveling parts  
• Loss of range stability from compromised leg function
• Reduced aesthetic and home resale value

This OEM replacement ensures secure, stable operation. Compatible with additional brands including Maytag, Jenn-Air, Amana, Magic Chef, Admiral, and select Kenmore designs.

The Cover Foot is an OEM part for Whirlpool ranges. Attaching to the bottom front panel, it provides protection and support for the range. Made of durable metal, the cover foot encases leveling legs or glides to safeguard them from scraping or impact damage. 

Symptoms of a bad cover foot include dents, scratches, or cracks that expose leveling components. 

Causes can be hits or abrasions incurred during installation, moves, or cleaning. 

Problems with a faulty cover foot consist of:

• Risk of injury from exposed leveling parts  
• Loss of range stability from compromised leg function
• Reduced aesthetic and home resale value

This OEM replacement ensures secure, stable operation. Compatible with additional brands including Maytag, Jenn-Air, Amana, Magic Chef, Admiral, and select Kenmore designs.

The Valve-Gas is an OEM part for Whirlpool gas stoves. It controls the flow of gas from the supply line into the burner tubing, igniters, and flames themselves during the operation of the range top. Precise control of gas flow is critical for safe and efficient cooking performance.

Symptoms of a bad gas valve can include:

• Inability to ignite one or more burners  
• Unstable, intermittent burner flames
• Burners that cannot be turned low enough or click off suddenly 
• Escaping gas odor near the range

Causes of a bad valve may involve wear and tear of internal parts like diaphragms or seals letting in air/gas, corrosion on valve surfaces from gas or moisture, or damage from appliance service/movement over time. 

This Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, and select Kenmore models.

This gas tubing supplies fuel from the appliance gas valve to the burner or manifold, restoring proper gas flow for safe operation. Replace damaged or corroded tubing to stop leaks and restore reliable ignition. What it does

• Carries natural gas or propane from the valve/manifold to burners or components.
• Restores proper gas flow when tubing is kinked, cracked, or corroded.
• Helps stop gas leaks that can cause a persistent gas odor near the appliance.
• Addresses burner failure or weak ignition caused by blocked or damaged tubing.

• Turn off the appliance, shut off the household gas supply, and disconnect power before starting.
• Inspect fittings and apply proper thread sealant or gas-rated connectors per manufacturer instructions.
• Tighten fittings to OEM torque/lightly snug—do not overtighten or damage fittings.
• After installation, test all connections for leaks with a soapy-water solution or a gas leak detector and follow local codes.

This gas tubing supplies fuel between the range's gas valve and burner assembly to restore safe, reliable gas flow. Install a new tube when the original is kinked, cracked, or leaking to help restore normal burner operation. What it does:

• Carries propane/natural gas from the control valve to the burner manifold or orifices.
• Replaces tubing that is cracked, punctured, pinched, corroded, or otherwise damaged.
• Can resolve symptoms like a persistent gas odor near the appliance, burners that won't light, or uneven flames when caused by damaged tubing.
• Designed to match the OEM routing and connections for a proper gas seal when installed correctly.

• One gas tubing (single piece) as shown

• Turn off the gas supply and electricity to the appliance before starting any work.
• Use appropriate fittings, thread sealant rated for gas, and torque to OEM specs; inspect all joints for leaks with a gas-safe leak detector or soapy water.
• If you smell gas, stop and ventilate the area; do not use open flames or electrical switches.

This electronic control module generates and manages ignition spark for DSI-equipped gas ovens/ranges. Replacing a failed unit restores reliable burner lighting and can resolve issues such as no spark, repeated clicking, or the oven/broiler not igniting.

• Generates high-voltage pulses to ignite gas at the DSI electrodes
• Times and controls ignition cycles; energizes the gas valve only during commanded ignition
• Monitors flame presence through the sense circuit and may retry or lock out if ignition fails
• Common symptoms of failure: oven or broiler won't ignite/heat, no clicking/spark, intermittent ignition, or continuous clicking
• Intended for models that use direct-spark (DSI) ignition systems, not glow-bar/hot-surface igniters

• Disconnect power and shut off gas supply before servicing
• Handle the control as an electrostatic-sensitive device; avoid touching terminals
• Transfer wires one at a time and mount the module securely with a proper ground
• After reassembly, restore utilities and verify normal ignition operation

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation