Parts for Whirlpool KSM88PSQ2BU0: 02 - Color Variation Parts

Replacement bowl for your stand mixer. Installs directly onto the mixer base. Order a new one if your current bowl is cracked, chipped, or damaged.

Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.

Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.

Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.

Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.

If your stand mixer runs loud or vibrates excessively, a cracked motor housing may be the cause. This housing secures and protects the motor assembly.

Fix excessive vibration or unusual motor noise with this stand mixer motor housing. Secures and aligns the motor for stable, quiet operation.

Onyx black bowl for stand mixers. Replaces cracked, chipped, or worn mixing bowls. Direct fit replacement for compatible KitchenAid models.

Fix a noisy or vibrating mixer with this gearcase housing. Protects internal gears and keeps them aligned for smooth mixing. Moderate DIY repair.

Replace the gray housing cover on your stand mixer. This cosmetic shell protects internal components and completes the exterior appearance when damaged.

Fix mixer beaters that don't rotate or make grinding noises with this planetary gear assembly. Common repair for worn gears in stand mixers.

Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.

Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.

Fixes grinding noise and erratic mixing. This planetary gear assembly restores smooth rotation in your stand mixer. Moderate DIY repair with proper tools.

White planetary gear assembly for stand mixers. Installs in the mixer head to drive beaters and attachments. Replace if cracked, damaged, or worn.

This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:

• Covers and protects the exposed end of the component housing to help prevent dust and debris entry
• Helps keep wiring and terminals shielded from accidental contact
• Restores the original appearance where the original cover was cracked, discolored, or missing
• Matches the OEM color scheme for a factory look

• Designed to snap or screw into the component housing—verify orientation before seating
• Use basic hand tools; avoid prying on tabs to prevent breakage
• Disconnect power to the appliance before attempting removal or installation
• If tabs or mounting points are damaged, replace associated housing parts as needed

Protective cover for stand mixers. Shields your mixer from dust and debris when not in use. Replace if torn, stained, or missing original cover.

This replacement cover restores the appliance's exterior finish and protects internal components from dust and damage. It helps maintain safe operation and a factory appearance after damage or wear. What it does:

• Replaces damaged, cracked or missing outer cover to prevent exposure of internal parts
• Shields wiring and components from dust and debris
• Restores proper airflow paths and helps reduce vibration-related noise when installed correctly
• Improves the appliance's appearance and helps preserve value

• Disconnect power before beginning any service to avoid electric shock
• Remove only the panels and fasteners necessary to access and replace the cover; keep track of screws and clips
• Handle the cover carefully to avoid scratching the finish; align tabs and fasteners before tightening

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

Imperial gray finish bowl for stand mixers. Replace cracked, chipped, or discolored mixing bowls. Attaches to mixer base for ingredient preparation.

Replacement trim panel cover for stand mixers. Restores exterior finish and protects internal components. Replaces cracked, broken, or missing panels.

Replacement cover for stand mixer housing. Protects internal components and provides finished appearance. Needed when original is cracked or broken.

Cobalt blue cover that restores your mixer's exterior appearance. Replaces the original panel when it's cracked, faded, worn, or missing.

Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.

Factory-matched Almond Crème touch-up paint for stand mixers. Covers small chips, scratches, and worn spots on Almond-finish appliances for a cleaner look.

White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.

Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.

Tangerine-colored housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores your mixer's appearance.

Gray housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores the appearance of your mixer's body shell.

Worn gears causing poor mixing? This stand mixer gearcase assembly transfers motor power to restore proper mixing action and performance.

Empire red lower gearcase housing for stand mixers. Replaces cracked, chipped, or discolored housing. Cosmetic cover that attaches to the base unit.

Decorative grille that covers the control area on your stand mixer. Replace if cracked, damaged, or loose to restore a clean, finished appearance.

If your mixer won't lift or lower properly, or makes grinding noises, the lower gearcase may be worn. This assembly restores smooth operation.

Almond Creme finish panel for stand mixers. Restores exterior appearance when original panel is scratched, worn, or discolored. Direct replacement.

This pedestal raises the appliance to a more comfortable height while providing a stable base and integrated storage space. It improves accessibility and makes loading and unloading easier by reducing bending. What it does:

• Supports and elevates the appliance for easier access to controls and drum/opening
• Provides a built-in storage area for laundry or accessory items
• Restores a level, secure mounting surface when the original pedestal is damaged or missing
• Helps reduce wear by keeping the appliance properly aligned and slightly elevated from the floor

• Disconnect power (and water for washer units) before starting any work
• Use two people or proper lifting equipment to position the appliance onto the pedestal
• Align mounting points and secure per manufacturer's fasteners; do not overtighten
• If the pedestal contains electrical connections (e.g., for drawer lights), follow OEM wiring instructions

Pedestal raises your stand mixer to a comfortable height and adds a built-in storage drawer for attachments and accessories. Replaces broken or missing pedestals.