Columbia Snow Removal Equipment Parts

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.

This V-belt is a genuine MTD part. It is manufactured as a replacement part for snow blowers and snow throwers. It is sometimes called an auger belt. On snowblowers, the v-belt helps rotate the impeller or auger. Over time, especially with frequent use, the v-belt can become worn and will need to be replaced. Before starting this repair, be sure the engine has completely cooled. Depending on the make and model of the blower, parts of the body or the engine may also need to be disassembled.This v-belt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Columbia, Cub Cadet, MasterCraft, MTD, Troy-Bilt, White Outdoor, and Yard-Man.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

This is a snowblower auger assembly that serves as a replacement for broken or damaged augers. The auger features rotating blades that collect snow and send it to the snowblower's chute. If the auger is not working properly, the machine will not work effectively and may have trouble throwing snow. It could also be dangerous if the auger were to break when the machine is in use.The auger may need to be replaced for any number of reasons. It could become damaged or broken, or it may have blades that are worn out over many seasons of use. Replacement will help to ensure the snowblower returns to its normal capabilities. To replace the auger, a 1/2-inch socket, 3/8-inch socket, 7/8-inch socket, and a 9/16-inch socket will be needed.This auger fits many models for MTD, Yard-Man, Husky, Yard Machines, and Troy-Bilt snowblowers. The auger is sold individually. This is a genuine OEM replacement part sourced from the manufacturer.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.