Parts for Kenmore 110.26132412 (11026132412, 110 26132412): Console And Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Control Panel Assembly is an OEM component specifically designed for Whirlpool top-loading washing machines. Found at the top center of the washer facing outward, the control panel features an electronic display and buttons to operate wash cycles.

Causes of a bad control panel include moisture intrusion over time degrading circuitry connections or software glitches from sustained usage. Physical cracks or punctures to the sealed membrane from accidental damage are also possible causes.

Symptoms of a bad control panel include:

• Unresponsive or non-functional buttons  
• Blank or fading digital displays
• Error codes or inability to select cycles

Compatible with additional Whirlpool-owned brands including KitchenAid, Roper, and some Kenmore top-load models.

This mounting bracket secures and supports appliance components to keep panels and internal parts aligned for reliable operation. It prevents shifting and reduces noise caused by loose or damaged supports. What it does:

• Secures panels or assemblies to the appliance frame to maintain alignment
• Prevents movement that can cause rattling, vibration, or uneven operation
• Replaces cracked, bent, or worn brackets that fail to hold components firmly
• Restores proper fit where mounting points were compromised

• One mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Use the original fasteners when possible; replace damaged hardware as needed
• Tighten to a snug fit—do not overtighten and strip mounting holes

This mounting bracket secures and supports appliance components to keep panels and internal parts aligned for reliable operation. It prevents shifting and reduces noise caused by loose or damaged supports. What it does:

• Secures panels or assemblies to the appliance frame to maintain alignment
• Prevents movement that can cause rattling, vibration, or uneven operation
• Replaces cracked, bent, or worn brackets that fail to hold components firmly
• Restores proper fit where mounting points were compromised

• One mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Use the original fasteners when possible; replace damaged hardware as needed
• Tighten to a snug fit—do not overtighten and strip mounting holes

The Wire Harness is an OEM part for Whirlpool washing machines. It comprises a bundle of wires that transmit electrical signals throughout the washer, connecting components like the control panel, motor, pump, and switches. The carefully designed wire routing within the protective sheathing allows all systems to operate in unison. 

Causes of a bad wire harness can be repetitive motion fatigue or damage to the insulation over many machine cycles. Constant vibration may cause wire breaks or shorts within the harness.

Symptoms of a faulty wire harness include: 

• Intermittent or unexpected operation of components  
• Inability to control wash programs or settings
• Error codes or failure detection messages
• Appliance shutting off unexpectedly 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, and some Kenmore models.

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

• Loose console assembly that is not securely fastened  
• Misaligned or dangling controls that do not sit flush
• Dislodged console at risk of detaching from housing
• Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Rear Panel is an OEM part compatible with Whirlpool washing machines. As the rear housing component, it protects internal mechanisms from debris while providing structure and stability to the cabinet. Its rigid design assists with even weight distribution to minimize vibrations. 

Symptoms of a bad rear panel can include:

• Warping or flexing of the panel material over time
• Cracks developing from pressure changes in the tub area
• Dents compromising the panel's integrity from heavy loads 

Causes of a bad rear panel washer stem from long-term use, with stress and strain accumulating from years of use. Agitator movement and unbalanced loads can warp the panel out of shape.

This OEM Whirlpool replacement rear panel helps restore the washer's protective barrier. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

The Power Cord is an OEM component compatible with Whirlpool washing machines. This power cord safely transmits electricity from the wall outlet to internal control boards and heating elements. Maintaining its integrity is vital for safe operation. 

Causes of bad power cord include cracked or worn insulation exposing live wires over multiple years of use. Repeated bending during installation can cause breaks in the internal copper strands.

Symptoms of a bad power cord include: 

• Intermittent power or failure to turn on fully  
• Tripped circuit breakers during heavy usage cycles
• Frayed or cracked areas increase shock/fire hazard
• Discoloration or brittleness indicating advanced breakdown

This Whirlpool replacement cord restores reliable power delivery. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser Housing is an OEM part for Whirlpool washing machines. It serves as the mount for dispensers containing fabric softener and detergent. 

Causes of bad dispenser housing involve cracks emerging over time, and distorted openings meant for smooth draws.

Symptoms include:  

• Dispensers falling out of place or prematurely discharging contents  
• Disrupted metering from housing leaks along its mounting connections   
• Loosened assembly allowing dispensers to tip during agitation 

This OEM Whirlpool part is also compatible with some Maytag, Amana, and Frigidaire washers.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Water Inlet Valve is an OEM component compatible with Whirlpool washing machines. This valve controls water flow into the tub by opening at predetermined points in the cycle. Proper water regulation is necessary for optimum cleaning performance.

Symptoms of a bad water inlet valve include:

• Slow or inconsistent filling during initial cycle phases   
• Premature displays of out-of-balance errors due to low water levels
• Inoperable cycles missing crucial wash or rinse stages 

Causes stem from mineral buildup obstructing valve ports over time. Mechanical failure could also prevent actuation from electrical commands sent by the control board.

This Whirlpool replacement valve restores accurate flow control. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Wire Harness is an OEM part for Whirlpool washers. Found running throughout the washer cabinet, this bundle of electrical wires safely routes power between key mechanisms. 

Symptoms of a bad wire harness include:

• Buttons/controls failing to function properly  
• Cycle programs or options not responding
• Compressor or motor randomly cutting off
• Circuit board issues due to loose connections

Causes can be wear over time from vibration in the washer leading to insulation cracks, wire breaks or loose connections that disrupt current flow. Accidental splices during repairs are also possible.

This OEM replacement harness is compatible with Maytag, KitchenAid, and more appliance brands.

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

The Bezel is an OEM part compatible with Whirlpool washing machines. This trim piece secures the control console interface within the cabinet opening. Proper mounting provides seamless integration for an aesthetically pleasing appearance.  

Causes of a bad bezel stem from environmental damages over time like cracks or discoloration from cleaning chemicals near the buttons. Repeated impact nicks and dents compromise structural integrity as well.

Symptoms of a bad bezel include:

• Loose hanging appearance no longer firmly fitted  
• Gaps forming entry points for lint and moisture damage
• Detached sections at risk of falling off entirely
• Visual deterioration marring overall style

This Whirlpool replacement bezel restores the finish and protects internal components. It is compatible with brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser Drawer is an OEM part for Whirlpool top-loading washers. Located internally at the top, it houses separate chambers for laundry detergent and fabric softener.  

Causes of a faulty dispenser drawer can include cracks or warping of the plastic divisions over years of repeated dosage cycles. Caked-on residue may also harden and jam drawers.

Symptoms involve: 

• Difficulty sliding the drawer in/out of its track housing
• Leaks from cracks allowing liquids to mingle or spill prematurely  
• Inability to accurately dispense separate detergents  

This OEM replacement is compatible with additional Whirlpool, Kenmore, and some Maytag top-loaders.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tie wire secures wiring and small components to a tree-style mounting post, helping keep harnesses organized and preventing chafing or loose connections. Durable metal construction holds wiring in place for reliable operation. What it does:

• Secures wiring bundles and small components to a tree-style mount or post
• Helps prevent wires from rubbing against sharp edges or vibrating loose
• Reduces risk of intermittent electrical connections caused by loose harnesses
• Keeps internal wiring organized for safer, cleaner repairs

• Tie wire

• Disconnect power and unplug the appliance before servicing
• Position wires on the tree mount and wrap or fasten the tie wire
• Trim or bend any sharp ends to avoid contact with other parts or wiring
• Replace if damaged, corroded, or no longer holds wiring securely

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.