Parts for Whirlpool GLS3665RS03: 01 - Cooktop, Burner And Grate Parts

This semi-rapid burner cap fits over the burner head to help shape and stabilize the gas flame for consistent cooking performance. It restores proper flame pattern and protects the burner from spills and debris. What it does:

• Centers and shapes the burner flame for even heating
• Helps prevent flame lifting and uneven or noisy flames
• Protects burner head from food spills and corrosion
• Useful when a cracked, warped or missing cap causes poor burner performance

• Turn off the appliance and allow the burner to cool completely before servicing
• Remove burner grate and lift off the old cap; set the replacement cap into place aligned with the burner head
• Do not force into position—ensure proper seating for correct flame pattern

This replacement burner cap fits the rapid/high burner and restores proper flame shape and heat distribution for gas cooktops. It helps you get even cooking and reliable ignition when the original cap is damaged or missing. What it does:

• Sits atop the rapid (high) burner to direct flame and protect the burner head
• Promotes even flame pattern for consistent cooking performance
• Can reduce flickering or uneven flames caused by a warped or cracked cap
• Helps prevent burner head damage from spills and overheating

• Allow the cooktop and burners to cool completely before handling.
• Make sure the burner head is clean and properly seated; place the cap onto the burner so it sits flat and centered.
• No special tools are typically required; if a cap is damaged, remove and replace rather than forcing into place.

Replacement control knob for ranges and ovens that lets you select and adjust burner or temperature settings. Restores easy, reliable control when the original knob is cracked, loose, or missing. What it does:

• Allows you to turn and set burner or oven control positions for cooking and heating.
• Provides a clear tactile stop and pointer for accurate selection of settings.
• Replaces damaged or worn knobs that slip, spin freely, or won't engage the valve/shaft.
• Helps restore safe, predictable control of the appliance's heating functions.

• Before starting, move all controls to OFF and disconnect power; for gas appliances, ensure the gas supply is turned off.
• Pull the old knob straight off the control shaft; align the new knob on the splines and push it fully into place.
• If a knob is stiff or stuck, use a soft cloth and steady, even force; avoid excessive prying to prevent damage.

This is the gas cooktop/range rapid burner head. It directs gas and airflow to create an even, reliable flame on the large "rapid" burner, helping your cooktop heat quickly and cook evenly.

• Distributes gas through calibrated ports to form a stable flame on the rapid burner
• Can help resolve weak or uneven flames, delayed ignition, or frequent burner re-lighting
• Replacing a damaged, clogged, or warped head can restore proper burner performance
• Designed to fit the rapid (largest) burner position on compatible units

• Disconnect power and shut off gas before servicing
• Remove the burner cap, lift off the old head, and clean the mounting surface
• Align the new head with the orifice and locating tabs; seat it flat and secure any screws if present
• Reassemble, restore gas/power, and test for proper ignition and flame

This burner head sits atop the semi-rapid gas burner on the cooktop, shaping the flame and distributing heat evenly to your cookware for reliable day-to-day cooking performance.

• Directs gas and air mixture to create a stable, even flame on the semi-rapid burner
• Can help address uneven flames, poor ignition, or weak heating at that burner position
• Restores proper heat distribution when the original head is clogged, warped, or damaged
• Designed to fit the semi-rapid burner location as specified by the manufacturer

• Disconnect power and shut off gas before servicing
• Ensure the burner area is clean; remove debris that could affect flame pattern
• Align the ports and locating features carefully; do not overtighten any fasteners
• After installation, check for proper ignition and a consistent blue flame

This surface ignitor is the replacement spark electrode that creates the spark to light a gas cooktop burner, restoring reliable ignition and helping the burner light quickly when gas is present. What it does:

• Generates the spark that ignites burner gas for proper cooktop operation
• Commonly used when a burner won't light, sparks weakly, or ignition is intermittent
• Replaces a cracked, chipped, or damaged ceramic tip or corroded electrode
• Works with the cooktop's ignition module to ensure consistent firing

• One surface ignitor (spark electrode)

• Turn off electrical power and gas supply before starting any repair
• Handle the ceramic tip carefully; avoid touching the electrode with bare hands
• Verify wiring connections are secure and match the original before reassembly

This surface ignitor is the spark electrode that lights gas burners on a range or cooktop. It restores reliable ignition so burners light when you turn the control knob. What it does:

• Produces the spark that ignites the gas at a surface burner
• Replaces a cracked, chipped, or non-sparking electrode
• Commonly used when burners click but fail to light or ignition is intermittent
• Helps eliminate delayed ignition and repeated clicking during start-up

• Disconnect power and shut off the gas supply before replacing the ignitor
• Handle the ceramic electrode tip carefully—avoid touching the tip with bare hands
• Verify the part number and terminal type match your appliance before installation

This Holder ORF is a small plastic retainer that secures the ORF assembly in place, keeping components aligned so they function reliably. It replaces a worn or broken retainer to restore proper fit and operation. What it does

• Secures the ORF assembly or related component to prevent movement or misalignment
• Helps stop rattling, shifting, or loose internal parts that can cause noise or improper operation
• Restores the original fit where the factory retainer has cracked, broken, or worn
• Works as a direct replacement when the diagram or parts list specifies a Holder ORF

• One Holder ORF retainer

• Disconnect power to the appliance before attempting any service
• Access the part following the appliance's OEM service instructions or parts diagram
• Replace the retainer by removing any clips or fasteners holding the old piece, then install the new retainer in the same orientation

This M4-0.7 screw is a small metric fastener used to secure panels, brackets, and internal components on compatible Whirlpool appliances. Replace stripped or missing screws to restore secure mounting and reduce rattles. What it does:

• Secures trim, access panels, brackets or small assemblies in place.
• Helps stop loose or vibrating panels that can cause noise or misalignment.
• Replaces missing, stripped, or damaged fasteners to restore proper fit.
• Compatible where an M4 diameter, 0.7mm thread-pitch screw is specified.

• Always unplug the appliance or shut off power at the breaker before servicing.
• Use the correct sized screwdriver or bit to avoid cam-out or head damage.
• Do not overtighten—tighten until snug and parts are properly seated.
• Keep removed hardware organized so replacements go back in the original locations.

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.