Parts for Jenn-Air JDRP648HM00: Cooktop, Burner, And Grill Parts

This side compartment is a replacement refrigerator door shelf that restores secure storage on the door and keeps bottles, jars and other items organized. It fits into a compatible refrigerator door to replace a cracked, broken or missing shelf. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small containers
• Replaces a cracked, broken or missing door shelf that allows items to tip or fall
• Restores proper spacing and organization inside the door storage area
• Helps keep stored items contained when opening and closing the door

• One side compartment

• High-level, snap-in installation—inspect mounting pegs or clips for damage before installing
• Power does not usually need to be disconnected, but remove all items from the shelf and wear gloves to avoid sharp edges
• If mounting clips are damaged, replace clips or the entire assembly to ensure a secure fit
• Test door operation with the shelf loaded to secure installation

This side compartment is a direct-fit door bin that restores storage on the refrigerator door, keeping bottles and small items secure and organized. Durable molded plastic replaces cracked or missing bins for reliable everyday use. What it does:

• Replaces a cracked, broken or missing door bin to restore storage capacity and organization
• Holds bottles, condiments and small containers along the inside of the refrigerator door
• Prevents items from falling when the door opens and closes
• Matches the factory shelf design for correct fit and alignment

• High-level snap-in/screw-in replacement; remove existing bin then install new bin until it seats
• Disconnect power only if removal requires working near electrical components; otherwise power disconnection is not typically needed
• Handle carefully to avoid damage to adjacent door liners or gaskets

Weak or uneven flame? This burner orifice meters gas flow for proper flame size and consistent heat. Restores reliable ignition on gas ranges and cooktops.

Burner producing weak, uneven, or no flame? This natural gas orifice meters precise gas flow to restore proper flame size and consistent heating.

If your gas range oven won't ignite or has weak sparks, this igniter wire connects the igniter to the safety valve for reliable spark transfer.

Cast iron grate that sits over gas burners on your range cooktop. Replace if cracked, chipped, warped, or has broken feet that no longer sit level.

Replace your worn, cracked, or broken gas range burner grate. This cast iron grate sits on top of the cooktop to support pots and pans over the burner.

Insulating pad that protects cooktop surface under burner grates. Replace if worn, damaged, or causing scratches. Confirm fit with your model number.

This replacement screw secures panels and components on compatible Whirlpool appliances, restoring proper fit and reducing rattles or loose trim. It's sized for appliance sheet-metal and trim fastening and matches the OEM finish for visible areas. What it does:

• Fastens panels, brackets, trims and small components to prevent movement and vibration
• Helps restore proper alignment and reduces rattling or gaps caused by missing or damaged fasteners
• Fits standard 8-18 threads with a 1.00 in. shank for common appliance mounting points
• Matches white finish for a discreet appearance on exposed areas

• Disconnect power and remove any access panels before working on the appliance
• Use the proper driver (Phillips or specified head) and start threads by hand to avoid cross-threading
• Tighten firmly but avoid over-torquing to prevent stripping or damaging sheet-metal
• Replace all like fasteners for even fit and alignment

Control knob bezel trim for gas range control panels. Replaces cracked, worn, or missing bezels to restore secure knob operation and panel protection.

Replace your gas cooktop burner cap when flames are uneven, discolored, or won't ignite properly. Covers the burner head for even heat distribution.

Uneven flames or weak heat from your gas burner? This surface burner head restores proper gas flow and even heating. Simple DIY swap in under 15 minutes.

Directs and shapes gas flame for even heating on your cooktop. Replace if damaged, warped, or flame pattern is uneven. Verify fit with your model number.

Plastic retainer clip that secures panels, trim, or wiring in your gas range. Replace if clip is cracked, broken, or missing to restore proper fit.

This burner box assembly houses and protects the range's burner components, helping direct heat and support reliable burner operation. It replaces a damaged or corroded box to restore proper burner alignment and safe operation. What it does

• Supports and positions the surface/broil burner so the flame or heating element operates correctly.
• Shields underlying wiring, igniters, and gas lines from spills and debris.
• Helps direct heat away from surrounding cabinetry and internal components.
• Commonly replaced when the box is warped, rusted, cracked, or causing burner misalignment or ignition problems.

• One burner box assembly

• Turn off electricity to the appliance at the breaker; for gas models, shut off the gas supply before starting.
• Use basic hand tools; keep track of mounting screws and any small brackets.
• Watch for sharp sheet-metal edges and wear cut-resistant gloves.
• After installation, restore power/gas and test burners for correct operation and any gas leaks.

Control knob for gas range and cooktop burner adjustment. Replaces cracked, broken, or missing knobs on the control panel. Direct fit replacement.

Replacement mounting screw for gas cooktops and ranges. Secures components during installation. Order a new screw if yours is stripped, lost, or damaged.

Replace your broken or missing range control knob. This interface part installs on the front panel to restore precise temperature and burner selection.

Decorative trim panel for gas range or cooktop. Replaces cracked, chipped, or discolored trim pieces along the top edge. Restores appearance.

Decorative trim panel for gas range cooktops. Replaces cracked, chipped, or worn trim pieces. Installs around burner area to restore clean appearance.

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.

Replacement 8-32 x 5/8 mounting screw for securing internal panels, brackets, and components in stand mixers. Restores tight fit if original is missing or stripped.

Fix unresponsive or sticky control panel buttons on your range. This push button restores reliable input for selecting settings and starting cycles.

Fix unresponsive or stuck range buttons with this control panel push button. Restores tactile feedback so cycles register correctly. Simple swap repair.

Fix unresponsive controls, blank displays, or cycles that won't start with a new main electronic control board for your refrigerator or freezer.

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.