Craftsman Edger Parts

This is a Tecumseh repair manual that has instructions and tips about working with 4-cycle L-head engines in various types of lawn and garden equipment. This is an important component for anyone who plans to service, repair, or replace parts in any number of Tecumseh machines. It is a needed item for those who use lawn equipment with a specific kind of engine. Repair manuals can be damaged in many ways and experience water damage, holes, scratches, or torn pages. The repair manual can also go missing and a new one will be needed to read more about Tecumseh repairs.If a user has lost their Tecumseh repair manual or needs one because it was never provided, this version is what will give instructions for repairing and replacing different parts of the lawn and garden equipment components. The repair manual has extensive information about making repairs and will speed up any work that needs to be done.This Tecumseh repair manual is a genuine OEM replacement document that is directly sourced from the manufacturer. It is sold as an individual manual. This part can be used with lawnmowers and snowblowers from Tecumseh, Lawn-Boy, Craftsman, and Cub Cadet.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a carburetor bowl. It holds the gas that is mixed with air before it enters the engine. The carburetor bowl contains a float which regulates the amount of gas needed to mix and fuel the engine.There are times when the carburetor in of itself is considered in good working order but the bowl may be compromised. This can happen if the bowl has been corroded. Rust will damage the carburetor bowl and render it ineffective. When replacing the carburetor bowl, be sure to work in a well-ventilated area and to wear the proper gear when handling engine parts. Once the carburetor is free from the engine, unscrew the bowl from the unit over a catch pan. Any contents will fall into the pan. Disassemble the old bowl's hardware and use it when installing the new bowl.This is a genuine OEM part manufactured by Tecumseh. It is compatible for Toro, Cub Cadet, and MTD engines.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This part is an inlet needle. This inlet needle works like a valve to transport fuel into the carburetor bowl when the bowl has drained and then stops fuel intake when the carburetor bowl is full. A new inlet needle may be needed if the fuel is not flowing into the bowl as it is supposed to. This can be evident if the carburetor floods or if the engine does not have enough fuel when it's operating at high speeds. A visual inspection of the inlet needle can also be a good indicator of whether or not it needs to be replaced. If any physical signs of damage are present, the inlet needle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This inlet needle is compatible with snowblowers manufactured by Tecumseh and Toro.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

The special traction drive belt is made from durable rubber, and it is responsible for helping to drive the edger forward. Edger belts are prone to wear and tear. They are a moving part that is used whenever the edger is operated. In some cases, they might start to fray or weaken, or they might break entirely. If the drive belt is not working correctly or is broken, the edger will not operate properly until the belt is replaced. Even if the belt has not broken entirely, it is a good idea to replace a worn belt before it does break. The authentic OEM replacement drive belt is identical to the belt that came with the machine. It is sold individually. The belt is specifically for use with edgers. It works on many models from Craftsman and Murray. When purchasing a replacement drive belt, owners should ensure they are choosing the right belt for their make and model.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

This replacement part is a spring. Springs produce torque which can aid in many different types of actions within an engine. If a spring has been put under too much pressure, it could snap. It may also stretch and lose its shape, which would also necessitate replacement. It is recommended that work gloves are worn to prevent injury during the repair or replacement process. This is a genuine replacement part made by Dewalt. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.