Craftsman Lawn Mower Fastener

This is a genuine replacement screw designed for Tecumseh engines installed on Toro lawn mowers. While screws are used for many purposes on the engine and mower body, this screw is usually found holding the starter grille in place over the rewind starter. The grille serves a number of important purposes, including allowing airflow, preventing large debris from binding up the starter, and more. In most cases, screws do not suffer from wear and tear. However, there are many ways they might be damaged. Removing the screw with the wrong tool might round the head, for instance. The screw may also be rusted in place if the mower is left unprotected in the elements. Replacing the grille screen screws is a simple process and requires little more than a wrench or the appropriate socket and ratchet. Simply unscrew it, dispose of it, and install the new screw. This screw is made from metal for better durability and is a genuine OEM replacement part. It is sold individually and works with Toro mowers with Tecumseh engines. It is also compatible with Craftsman, Lawn-Boy, and Cub Cadet mowers.

This replacement stud is designed for use in select lawn mowers. The carburetor mounting stud is specialty hardware that is used to mount the carburetor on the engine assembly. The stud bolt secures the carburetor, but it is subject to extreme temperatures and ongoing vibrations so it can become worn or even snap over time. Without a stud bolt, the carburetor will not be properly affixed to the rest of the engine, which means it will not be able to run properly. Replacing a faulty stud bolt should be done as soon as possible. This OEM stud bolt is manufactured to exact standards and is compatible with 150+ models from the Tecumseh brand, as well as select mowers from Toro and MTD. The bolt requires pliers and a socket set to replace. Always allow the engine to cool completely and drain the fuel system before performing work on the carburetor or internal engine parts. This stud bolt is made of durable metal and sold as a single unit.

This self-tapping hex screw is designed to be used on various components of lawnmowers and snowblowers. It can also be used for many other things that require a self-tapping screw. It can secure wood, metal, brick, and plastic materials together. Self-tapping hex screws do not require a pilot hole as the screw makes it on its own. Only metal will require a pre-drilled hole to use the hex screw.A quick visual inspection will give insight into whether a hex screw needs to be replaced. Sometimes they can break or become damaged over time. In other cases, the self-tapping screw may become loose and will not hold materials together in the appropriate way. Some screw heads also get stripped and will require replacement. If a hex screw is damaged, a hex wrench can be used to remove it. The replacement hex screw can then be inserted and tightened to faster materials back together.This self-tapping hex screw can be used with lawnmowers, lawn tractors, and snow blowers made by Snapper, Murray, Briggs & Stratton, Craftsman, and Simplicity. It is a genuine OEM product directly sourced from the manufacturer. It comes as an individual screw.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

The screw is used on various parts of lawn and garden equipment for various purposes. It is used to help fasten different pieces to one another. The screws ensure the machine is working properly, and it can help to reduce vibrations. The screws in the equipment may need to be replaced for any number of reasons. In some cases, they might have developed issues with the threads and no longer hold properly. They could have become corroded or they could have been lost when working on the engine. When there is an issue with the screw, it should be replaced right away. The authentic replacement screws are sold individually. They can be used with lawn mowers, snowblowers, log splitters, wood chippers, tillers, pressure washers, generators, and other small engines. The compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity. When buying screws, owners need to get the correct size for their needs. It may be a good idea to have several extra screws on hand.

This genuine Midwest Engine replacement cotter pin can be used in the small engines of outdoor appliances such as lawn mowers, snowblowers, leaf blowers, lawn tractors, and wood-chippers. A cotter pin is one of many kinds of fasteners; its specific function is to ensure that nuts and bolts remain connected to one another. A cotter pin is particularly effective in small engine appliances that vibrate erratically. Though this vibration can shift nuts and bolts and gradually unscrew them over time, a cotter pin will ensure that the nuts and bolts remain in place.Despite the fact that cotter pins are usually a precautionary measure to prevent nuts and bolts from loosening on their own, cotter pins can be subject to damage themselves in the form of cracks, warping, or erosion. This damage can come from overuse, age, exposure to the elements, or collision with a hard surface. In the case that the cotter pin is no longer holding nuts and bolts in place, a replacement should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This cotter pin is compatible with the following brands: Midwest Engine, Snapper, Simplicity, and Murray. Part sold individually.