Parts for Poulan BVM200 TYPE 1: Cylinder / Crankcase / Crankshaft Parts

This replacement part is a washer. This part is small but important in various types of machinery. Washers work with other small parts like screws and nuts to ensure that components are secured within the equipment.A new washer might be needed if the current one is worn down or otherwise damaged. Work gloves are recommended when working with small parts. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.

Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.

This replacement part is a retaining ring. This is a genuine replacement part made by Husqvarna. This part acts as a fastener and is used to hold certain components together. This ensures that the machine is working efficiently during use. A new retaining ring might be needed if the current one is visibly damaged or is no longer able to stay attached to the machine. If the ring has become stripped over time, it might be best to replace it so that the appliance can return to working order. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This bearing is a genuine Husqvarna part, sold individually. A bearing can be used as a replacement part for outdoor appliances including string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The purpose of this genuine OEM part is to facilitate the rotation of one or more components within one of these outdoor appliances.If the bearing has been punctured, dented, cracked, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.

The crankcase gasket is a standard part found in internal combustion engines. This gasket creates an air-tight seal between the crankcase and the cylinder head. It is exposed to constant vibration, high heat, and pressure, which can cause the gasket to warp, wear, or even break over time and with regular use. Gaskets are typically considered a part of routine maintenance and should be replaced as soon as damage or performance issues are noticed. A faulty gasket could cause air or fluid leaks that result in poor engine performance or an inoperable engine. This genuine OEM gasket is manufactured by Paramount and is compatible with several small engines on lawn and garden equipment. It can be used in machines from Poulan, Weed Eater, Jonsered, Husqvarna, and Paramount. This crankcase gasket is compatible with dozens of models of hedge trimmers, blowers, and edger/trimmer models from these brands. It is made of durable composite material and sold as a single unit. It is advised to replace gaskets whenever performing engine repairs to ensure a secure seal when reassembling the components. It is also a good idea to keep extra gaskets on hand in case of emergency repair needs.

This gasket kit can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of a gasket kit for a leaf blower or a leaf vacuum is to provide all of the necessary parts to attach the replacement gasket to the engine in order to seal it. The purpose of a gasket is to seal off the components to which it is attached in order to prevent leakages.A gasket kit might have to be ordered as a complete replacement in the event that the gasket for a leaf blower or a leaf vacuums is blown and its fastening components are rendered useless in the process. A gasket can suffer from general wear and tear that loosens its seal or from direct impact upon collision that can knock it out of its place in the small engine. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. This gasket kit is compatible with the following brands: Husqvarna, Weed Eater, Craftsman, and Poulan.

This is a muffler bolt for use with leaf blowers. It is sometimes called a muffler screw. The bolt is used to help affix the muffler to the leaf blower. If the piece has been damaged, it could mean that the muffler is no longer properly connected to the machine. This could cause rattling, as well as a louder noise from the leaf blower. In those cases, it will need to be replaced.Made from metal, the piece is long-lasting. However, it could still need to be replaced if it is damaged or corroded. The muffler bolt is easy to replace, but owners will want to be sure that they use gloves to keep their hands safe. They should also make sure the blower is off and can't be activated by mistake. This will reduce the risk of accidents.The muffler bolt can work with models of leaf blower from Poulan, Weed Eater, and Husqvarna. The piece is sold individually. The piece has been sourced from the manufacturer and is a genuine OEM replacement part.

Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.

The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This part is a piston. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated or broken piston on a certain engine outdoor power equipment models. Pistons are an essential component to the function of a engine, as they are responsible for transferring power from the combustion of the engine to all the working parts of the equipment. Over time, pistons may become worn or damaged and will need replaced in order for the machine to continue working correctly. Signs of a worn-out piston may include excessive consumption of oil, white/gray exhaust smoke, and overall loss of performance and power. Proper tools are needed to replace this part. For accurate information on how and where to install this replacement piston, specific manufacturer diagrams should be referenced.As an authentic OEM replacement part, this piston can be used on several different models of hedge trimmers, blowers, and edgers that are manufactured by Poulan, WeedEater, and Craftsman. Please note that this piston is a genuine part made of high-quality, durable metal materials and is sold individually.

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.