Parts for Weedeater TE400CXL TYPE 2 (RECON): Cylinder / Crankcase / Crankshaft Parts

Muffler kit for gas line trimmers and edgers. Replaces damaged, rusted, or missing muffler assemblies to restore proper exhaust function.

Secures the muffler in place and reduces vibration on leaf blowers and trimmers. Replace if spring is stretched, broken, or missing for proper exhaust.

Fix engine overheating or oil leaks with this cylinder head bolt. Secures the cylinder to the manifold in trimmers and blowers. Easy 15-minute repair.

If your edger won't start or runs rough, a worn spark plug is often the culprit. This part restores ignition for smooth starts. Quick 5-minute fix.

Repairs worn cylinders in gas trimmers and edgers. Replace when experiencing loss of power, hard starting, or excessive smoke. Verify fit with your model.

Engine gasket kit provides tight seals between engine components to prevent air, fuel, and oil leaks. Replace when you notice leaks or during engine repairs. Verify fit with your edger model number before ordering.

Carburetor adaptor mounting screw for trimmers and outdoor power equipment. Replace if stripped, missing, or damaged to secure carb adaptor properly.

Engine gasket kit provides tight seals between engine components to prevent air, fuel, and oil leaks. Replace when you notice leaks or during engine repairs. Verify fit with your edger model number before ordering.

Engine won't start or runs rough? This carburetor regulates fuel and air mixture for smooth engine operation. Moderate DIY repair for most models.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.

Replacement screw for brush cutters, chainsaws, and trimmers. Used to secure various components. Replace if stripped, missing, or damaged during use.

Foam air filter keeps dirt out of your engine and carburetor. Replace when clogged to prevent rough idling, sputtering, and hard starting. Verify fit.

Choke spacer for grass line trimmers and other outdoor power equipment. Replaces cracked, broken, or missing spacers in the carburetor choke assembly.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

If your trimmer won't start or has lost power, a worn connecting rod assembly with failed bearings may be the cause. Connects crankshaft to piston.

Engine gasket kit provides tight seals between engine components to prevent air, fuel, and oil leaks. Replace when you notice leaks or during engine repairs. Verify fit with your edger model number before ordering.

Fix a trimmer that won't start or shut off properly with this ignition spacer. Allows correct spacing for ignition function. Simple installation.

Ignition module for gas leaf blowers and trimmers. Works with flywheel to create spark timing. Replace if damaged by heat exposure or engine won't spark.

Tapping screw for outdoor power equipment. Secures various components in chainsaws, trimmers, blowers, and hedge trimmers. Replace if missing or stripped.

If your chainsaw won't start or stop properly, the on/off switch may have failed. This safety switch controls power to the engine. DIY repair.

Replace a broken or cracked starter handle that won't recoil or pull smoothly. This handle restores easy pull-starting on your trimmer in minutes.

Starter rope kit for gas line trimmers. Installs in the recoil starting mechanism. Replace if rope is frayed, broken, or won't retract properly.

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

Replacement mounting screw for outdoor power equipment. Secures various components and reduces vibration. Order when screws are stripped, lost, or damaged.

Tapping screw for outdoor power equipment. Secures various components in chainsaws, trimmers, blowers, and hedge trimmers. Replace if missing or stripped.

Engine gasket kit provides tight seals between engine components to prevent air, fuel, and oil leaks. Replace when you notice leaks or during engine repairs. Verify fit with your edger model number before ordering.

Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

Trimmer won't start or has a stuck pull cord? This starter pulley kit restores smooth recoil operation. Common fix for hard-starting line trimmers.

Starter rope won't retract on your trimmer? This starter spring kit restores automatic rope rewind. Fits recoil starter assemblies on trimmers.

Engine gasket kit provides tight seals between engine components to prevent air, fuel, and oil leaks. Replace when you notice leaks or during engine repairs. Verify fit with your edger model number before ordering.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

If your chainsaw won't start or runs then stalls, a cracked fuel line may be blocking fuel flow. This replacement line restores proper fuel delivery.

Fuel supply line kit for chainsaws and trimmers. Replaces cracked, brittle, or deteriorated fuel lines. Essential for maintaining fuel system integrity.