Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This muffler spring is used on a variety of lawn and garden equipment, such as blowers and trimmers. It is made of durable metal and is tasked with ensuring the muffler is held in place while cutting down on vibration when using machinery. Over time, the muffler spring can become damaged or even break. When this occurs, the muffler will no longer be held in a stable position. It can also create additional vibration and be harder to use the lawn equipment.Inspecting the muffler spring can give insight into whether it is broken or damaged and if it will need to be replaced. Remove the shroud that covers up the muffler and spring to get a good look at it. If it's dirty, it may need to be cleaned. A muffler spring with damage should be replaced. Disassemble the unit to gain access to the spring so the new part can be placed.This muffler spring is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The part can be used with string trimmers, edgers, leaf blowers, and hedge trimmers manufactured by Poulan, Craftsman, Husqvarna, and Weed Eater. This part is sold individually.
This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.
Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.
This replacement part is a gasket kit. This part is a genuine replacement part made by Husqvarna. This part works together with the engine of the machine to allow the appliance to function smoothly and effectively. A new gasket kit might be needed if the current one is missing parts or if any of the pieces are damaged. This can be due to a singular incident or from common wear and tear after years of use. Be sure to wear work gloves when repairing parts that are close to the engine. It is also recommended that the engine be completely turned off before starting this repair. Be sure to refer to the user manual before attempting to replace this part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. Note that This is a genuine OEM replacement part.
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.
This carburetor kit is a genuine Husqvarna part that can be used as a replacement part inside snowblowers, wood-chippers, lawn mowers, and other outdoor appliances. The function of the carburetor kit in a small engine is to mix the air and the fuel together at a proper ratio for combustion before they are both passed into the engine via the network of valves. This carburetor kit includes the carburetor and the primer bulb. If the carburetor kit is indeed malfunctioning or in a state of disrepair, there are signs to look for in confirming the issue. Pour a spoonful of fuel directly into the carburetor and try to start the engine with the recoil starter. If the engine fails after a quick false start, the carburetor kit might be in need of repair or total replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor kit is compatible with the brands Husqvarna and Weed Eater.
This part is discontinued by the manufacturer and is no longer available for purchase.
This part is a piston. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated or broken piston on a certain engine outdoor power equipment models. Pistons are an essential component to the function of a engine, as they are responsible for transferring power from the combustion of the engine to all the working parts of the equipment. Over time, pistons may become worn or damaged and will need replaced in order for the machine to continue working correctly. Signs of a worn-out piston may include excessive consumption of oil, white/gray exhaust smoke, and overall loss of performance and power. Proper tools are needed to replace this part. For accurate information on how and where to install this replacement piston, specific manufacturer diagrams should be referenced.As an authentic OEM replacement part, this piston can be used on several different models of hedge trimmers, blowers, and edgers that are manufactured by Poulan, WeedEater, and Craftsman. Please note that this piston is a genuine part made of high-quality, durable metal materials and is sold individually.
The piston ring provides a seal between the cylinder wall and the piston, attaching inside the groove around the piston directly. It is responsible for keeping the combustion gases in the cylinder and preventing them from entering the crankcase. The piston ring may break down with general use over time or it may break unexpectedly due to some kind of damage or other mechanical failures. This creates poor compression in the cylinder and can result in a loss of power to the equipment. Significant leaks could result in an engine that won’t run at all. The Husqvarna piston ring is a genuine OEM part from American Yard Products, who manufactures equipment and parts for leading industry brands, including Husqvarna, Craftsman, Poulan and Poulan Pro, Weed Eater, Sears/Roper, Rally, Electrolux Home Products, and Yard Pro. This piston ring fits several models of leaf blowers and trimmers from the brands listed. Refer to your user manual parts diagram for exact part compatibility.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This part is a replacement switch assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective switch in a variety of edger models. The switch is essential for starting and stopping the edger's engine, as it completes or breaks the electrical circuit. If the switch is broken or malfunctioning in any way, the user may not be able to use the edger, as it may not be able to start. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this switch, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this switch is suitable for use on several different models of edgers manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.
The ignition module, also called an armature magneto or a magneto charger, is an integral part of handheld gasoline lawn and landscape tools like grass trimmers, leaf blowers, power vacuums, hedge trimmers, and edgers. The ignition module provides a high voltage jolt to the spark plug of a handheld tool when a pull cord is yanked. This in turn fires the fuel/air mixture in the carburetor, bringing the engine to life. Typically, the ignition module is durable and can last as long as the effective life of the tool. Sometimes, however, heavy usage can result in the magneto not being able to deliver the necessary voltage to the spark plug. When repeated pulling of the starter rope yields no sign of combustion, often the culprit is a faulty ignition module. Because this part is used on so many different types of equipment, it is impossible to give simple replacement instructions. It should be noted, however, that the part is easily located since one end of the ignition modules is the spark plug cap. Be sure to replace this part with one like this, which is a genuine OEM replacement part, manufactured to replicate the original part exactly. This ignition module is compatible with device sold by Husqvarna, Jonsered, Weed Eater, Paramount, and Poulan.
These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This replacement part is a wire starter. This is a genuine replacement part made by Husqvarna. This part is commonly found in weed eaters and ensures that the part is able to start and stop properly according to the user settings. A new wire starter might be needed if they are unable to start or stop the machine in the correct way. This can be due to normal wear and tear with years of extended use. Be sure that the engine is powered down to avoid injury. It is also recommended that the user refers to the proper manual before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This starter dog is a genuine Husqvarna part, sold individually. This starter dog can be used as a replacement part for a chainsaw or a string trimmer. The function of the starter dog, otherwise known as the starter pawl, is to work in conjunction with the spring and the starter in order to turn on the engine. When the starter rope is pulled, the pull mechanism activates the starter dog, which is pulled back by the spring, which engages the flywheel, rotates the crankshaft, and starts the engine, all in quick succession. A starter dog is a crucial aspect of the ignition system, so damage to the starter dog will require an immediate replacement with this genuine OEM replacement part. Damage to a starter dog can manifest as punctures or tears that sever it from the pull mechanism and lead to an engine that will not start upon pulling the starter rope. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This starter dog is compatible with the following brands: Husqvarna, Craftsman, and Poulan.
This is a genuine fuel cap with retainer that is designed as a replacement for select outdoor lawn and garden equipment engines. The fuel cap is responsible for sealing the fuel tank, providing an airtight fit and securing the fluid inside the tank to prevent fuel spills during use. The plastic retainer holds the cap in place when it is open. Both parts could become damaged over time and the retainer could detach entirely. If this occurs, it is best to replace the entire unit.This OEM fuel cap with retainer is manufactured by MTD and designed for use in machines from the brand, as well as those from Yard Man, Husky, Bolens, and Yard Machines. It screws on and requires no tools for installation. The retainer simply fits into the fuel tank to secure the cap when it is open. This cap is sold as an individual part and does not include any additional hardware or a new fuel tank. If the fuel tank itself is damaged and needs replaced, that will require an additional purchase. This fuel cap with retainer will ensure that fuel stays secured and that the unit can run properly at all times.
This is a 25-inch long fuel line for use with various outdoor power tools and equipment that include small engines. Known as a fuel hose, fuel tube, or pick-up tube, the fuel line delivers fuel from the tank to the carburetor. It is made of flexible translucent plastic to prevent splitting and kinking. Over time, the fuel line can become brittle, cracked, or clogged. When a crack or clog develops, fuel can leak out and make it difficult to start the engine. A leak can cause damage to the motor and the equipment, create performance issues, and even become a safety hazard because of the flammability of the fuel. Replacing a worn-out or cracked fuel line is easy and takes 30 to 60 minutes to complete. Disconnect the old fuel line from the carburetor and the fuel grommet, then replace it with the new line. This replacement part works with different outdoor power tools like the chainsaw, edger, hedge trimmer, leaf blower/vacuum, pole pruner, and pole saw. It is compatible with popular brands like Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is an OEM replacement part sourced directly from the manufacturer and is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This replacement part is a retaining ring. This is a genuine replacement part made by Husqvarna. This part acts as a fastener and is used to hold certain components together. This ensures that the machine is working efficiently during use. A new retaining ring might be needed if the current one is visibly damaged or is no longer able to stay attached to the machine. If the ring has become stripped over time, it might be best to replace it so that the appliance can return to working order. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or misplaced screw in a variety of lawn equipment. This screw is a high-quality piece of standard hardware with multiple different uses. Screws are essential for securing parts of the equipment, but can easily become lost, stripped, or otherwise damaged. If screws are missing, it can affect the functionality of the equipment. A Phillips head or flat head screwdriver can be used to install this screw. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this screw is suitable for use on several models of lawn equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.
This bearing is a genuine Husqvarna part, sold individually. A bearing can be used as a replacement part for outdoor appliances including string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The purpose of this genuine OEM part is to facilitate the rotation of one or more components within one of these outdoor appliances.If the bearing has been punctured, dented, cracked, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.
This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.