Parts for Craftsman 358795920: Cylinder / Crankshaft / Fuel Tank Parts

The attachment hanger holds the line trimmer attachment when it is not being used. The part is made of durable plastic, but it can experience wear and tear or damage due to impact. If the attachment hanger is broken, it will need to be replaced so the line trimmer has a place to hang.Taking a quick look at the attachment hanger will give insight into whether it's cracked, broken, or otherwise damaged. This is an easy component to replace since it snaps off of the lawn equipment. All that one needs to do is take the old one off and install a new one. Once it has been installed, the new attachment hanger can be used to hold accessories when the machine is running.This attachment hanger is a genuine replacement part sourced directly from the manufacturer. It is sold as an individual component. The hanger is designed to be used with string trimmers, pole pruners, and chainsaws manufactured by Craftsman, Weed Eater, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

Piston ring seals the combustion chamber in your line trimmer engine. Replace when you notice loss of compression, hard starting, or excessive smoke. Verify fit with your model number.

Replacement fastening screw for gas and electric line trimmers. Secures internal components and housing panels. Replace if stripped, missing, or worn.

Complete gasket kit for string trimmers. Replace when you notice fuel leaks or loss of compression. Includes all components for proper sealing. Confirm fit with your model number before ordering.

Starter rope kit for gas chainsaws and line trimmers. Installs in the recoil starter assembly. Replace if rope is frayed, broken, or worn out.

Replacement shroud assembly for gas line trimmers. Houses the pull-start mechanism. Replace if cracked, broken, or damaged from impact or wear.

Replacement shroud assembly for gas line trimmers. Houses the pull-start mechanism. Replace if cracked, broken, or damaged from impact or wear.

If your chainsaw rope won't retract after pulling, the starter spring likely needs replacement. This spring creates the recoil to start the engine.

Line trimmer won't start or pulls hard? This starter pulley kit restores easy starting. Moderately easy DIY repair for gas-powered trimmers.

Recoil spring for gas and grass line trimmers. Holds the pulley in place and assists with starting mechanism. Replace if damaged, broken, or worn out.

If your trimmer won't start when pulling the cord, the starter pawl may be worn or broken. This small part engages the engine during pulls.

Replacement mounting screw for gas leaf blowers and trimmers. Secures housing panels and components. Order a new screw if yours is stripped or missing.

Fix a trimmer that won't start or has a spinning starter cord with this starter coupling sleeve. Connects the recoil starter to the engine crankshaft.

Trimmer won't start or rope won't retract? This starter cup assembly rotates the flywheel to power your engine. Direct-fit part for many trimmers.

Radial ball bearing (6201) for gas leaf blowers and trimmers. Replace when you hear grinding noise or feel excessive vibration. Verify fit with model.

Secures the muffler to the cylinder on gas trimmers, blowers, and hedge trimmers. Replace if the original bolt is lost, stripped, or damaged.

Fixes weak engine performance and power loss in gas line trimmers. This spark arrester screen prevents carbon buildup in the exhaust. Quick 10-minute fix.

Secures the fuel tank to the body of your leaf blower or trimmer. Replace if screw is missing, stripped, or damaged to keep fuel tank properly mounted.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

Ignition module for gas line trimmers. Mounts to the engine block and generates spark timing. Replace if cracked, corroded, or physically damaged.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Fix trimmer that won't accelerate, makes grinding noises, or emits burning smell. Clutch assembly connects engine to cutting head. Moderate DIY repair.

Replacement bolt for gas and grass line trimmers. Secures components and housing. Order if your original bolt is lost, stripped, or damaged.

Connects carburetor to adapter on gas trimmers. Replace if cracked, brittle, or causing air leaks and poor engine performance. Verify fit with your model.

Engine won't start or runs rough? A faulty choke lever prevents proper cold starts. This replacement lever restores choke control for reliable starting.

Carburetor assembly for gas-powered line trimmers. Mixes fuel and air for engine combustion. Replace if cracked, clogged, or leaking fuel.

Keep your trimmer running clean with this air filter. Catches dirt and debris to protect the engine. Replace when clogged or damaged for optimal performance.

Black air box cover knob assembly for chainsaws and line trimmers. Secures the air filter housing cover. Replace if cracked, broken, or missing.