Parts for Craftsman 358795920: Drive Shaft / Handle / Shield Parts

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

The attachment hanger holds the line trimmer attachment when it is not being used. The part is made of durable plastic, but it can experience wear and tear or damage due to impact. If the attachment hanger is broken, it will need to be replaced so the line trimmer has a place to hang.Taking a quick look at the attachment hanger will give insight into whether it's cracked, broken, or otherwise damaged. This is an easy component to replace since it snaps off of the lawn equipment. All that one needs to do is take the old one off and install a new one. Once it has been installed, the new attachment hanger can be used to hold accessories when the machine is running.This attachment hanger is a genuine replacement part sourced directly from the manufacturer. It is sold as an individual component. The hanger is designed to be used with string trimmers, pole pruners, and chainsaws manufactured by Craftsman, Weed Eater, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

The trigger kit is a set of two parts that help ensure lawn and garden equipment is used in a safe manner. It is part of the throttle assembly and ensures the motor does not start running if the trigger isn't pulled at the same time as the starter string being pulled. If the parts of the trigger kit become damaged or broken, the equipment will no longer start. A new trigger kit will need to be installed to use the tool.Getting to the trigger kit parts involves taking the handle off of the machine. Take off the coupler and lower shaft before separating the plastic trigger housing. Once that has been done, a visual inspection can be done of the spring and trigger. Remove the cable and old trigger before replacing it with the new part and reassembling the tool.This trigger kit is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with a trigger and a spring. The trigger kit is designed for use with pole pruners and string trimmers created by Craftsman, Poulan, and Poulan Pro. This part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This replacement part is an upper shaft and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This upper shaft is typically found in hedge trimmers and is an important part to this appliance. This part is able to connect the power source from the top of the appliance to the trimmer head at the bottom so that the drive mechanisms is activated. A new upper shaft might be needed if the user is unable to control the mechanisms at the bottom of the trimmer. It is possible that the upper shaft might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a replacement driveshaft coupler. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective driveshaft coupler in a variety of line trimmer models.The driveshaft coupler connects the lower driveshaft to the upper driveshaft. This part may become worn or broken over time and will need to be replaced. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this driveshaft coupler, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this driveshaft coupler is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement flexible driveshaft. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a broken or defective driveshaft in line trimmers.The flexible drive shaft works to drive the line trimmer's cutting head by fitting inside the driveshaft housing. If this part is defective in any way, the user may struggle to adequately maneuver the equipment, thus this part should be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this flexible driveshaft, the appropriate owner's manual and equipment diagrams should be referred to. This flexible driveshaft is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with line trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.

This shield bracket is a genuine Husqvarna part, sold individually. This shield bracket can be used as a replacement part in a string trimmer. The purpose of a shield bracket in a string trimmer is to secure the shield so that flung debris can be safely kept away from the operator during use.The shield bracket in a string trimmer might eventually have to be replaced if it can no longer hold the shield firmly in place while the appliance is being operated. The shield bracket could be dented, punctured, scraped, warped, or eroded to the point that it cannot hold anything in place, and if this occurs, the shield bracket should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shield bracket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This glide plate is compatible with a variety of Craftsman string trimmers for lawn and gardens. It attaches to the cutting head of the machine to ensure the cutting line is secure as it goes into the cutting head. This glide plate is made of durable plastic but regular use can cause wear and tear and the plate may become damaged. If the glide plate is knocked into other items, this can also damage it and prevent it from doing its job. If the glide plate needs to be replaced because it is damaged, cracked, or broken, the process is simple. First, make sure the string trimmer is turned off and place it on a level surface where work can be done. Reach down to the bottom where the part is located and slide it off of the machine. Once it has been removed, the new component can be installed in the opposite way. After installation, the trimmer can be used again.This is a genuine OEM replacement glide plate that is sold on an individual basis. The part is designed for use with several string trimmers by Craftsman.