Parts for Maytag MFI2269FRZ02: 09 - Dispenser Front Parts

This control panel overlay replaces a worn, cracked, or faded front console surface so your appliance's button labels and finish look and feel like new. It restores a clean, readable interface and protects the underlying controls. What it does:

• Covers and protects the appliance's control area from spills, wear, and scratches
• Restores faded or peeling button labels so settings are easy to read
• Replaces cracked, warped, or cosmetically damaged overlays
• Helps prevent contaminants from reaching the control board area
• Matches original fit and button cutouts for proper operation

• One control panel overlay

• Disconnect power to the appliance before starting any repair
• Remove the console or trim panel fasteners as required to access the overlay
• Align the overlay with the button cutouts and snap or screw it into place; avoid forcing parts
• Use mild cleaners only; avoid solvents that can damage plastic or printed labels

This electronic control board is the appliance's main console circuit that manages user commands, cycle selection, and timing so your unit runs the selected programs reliably. Replacing a faulty board can restore normal control and display operation. What it does:

• Interprets button/knob inputs and sends signals to start and stop cycles
• Controls timing, cycle selection, and user-interface displays
• Common symptom: unresponsive controls or no display illumination
• Common symptom: appliance won't start, cycles won't advance, or error codes appear
• Works as the central communication hub between sensors and motors

• One electronic control board (main console)

• Disconnect power (unplug or switch off breaker) before beginning any work
• Take anti-static precautions and handle the board by its edges to avoid damage
• Access typically requires removing the control panel; keep track of screws and connectors

The Dispenser Drip Tray is an OEM part for Whirlpool refrigerators that have an internal dispenser. Located beneath the dispenser area, it collects any excess water, moisture, or spilled liquids during manual or automatic dispensing of ice and water.  

Symptures of a bad dispenser drip tray include:

• Puddling, leaks or drips beneath the dispenser
• Water damage or staining under the fridge  
• Malfunctioning of electrical components in the dispenser area

Causes can be cracks or punctures allowing leakage, warping affecting proper drainage, or clogs preventing the tray from effectively emptying collected fluids.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore fridge models.

This chute extension yoke supports and pivots the refrigerator dispenser's chute extension so ice is directed cleanly into your glass. Replace a cracked or worn yoke to restore smooth extension action and consistent dispensing. What it does:

• Supports and pivots the dispenser's chute extension/funnel
• Keeps the chute aligned to guide ice into the container
• Helps the extension deploy and retract smoothly when dispensing
• Failure signs: loose or broken chute extension, misdirected ice, sticking or uneven movement, visible damage to the yoke

• One chute extension yoke

• Disconnect power to the refrigerator before servicing
• Remove the dispenser trim/front panel to access the chute extension
• Note spring and hardware orientation; transfer any reusable parts to the new yoke
• Reassemble carefully and test the dispenser for smooth operation

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

This target ring is a small trim piece that restores the original fit and appearance around a control button or panel opening. Replacing a damaged ring helps ensure clean button engagement and a finished look. What it does:

• Serves as the trim/target around a control button or panel opening
• Keeps the button aligned for consistent engagement and operation
• Restores finished appearance when the original ring is cracked, warped, or missing
• Prevents debris from collecting around the control area

• One replacement target ring

• Disconnect the appliance from power before attempting replacement
• Usually installs by snapping into place or securing with retained fasteners — handle gently to avoid breaking tabs
• Confirm proper button movement and secure fit before returning appliance to service

The Ice Chute Door Spring is an OEM part for Whirlpool refrigerators. This part returns the ice chute door to its closed position after ice has been dispensed, ensuring the door remains sealed to maintain proper temperature and efficiency.

Causes of a bad ice chute door spring can include wear and tear over time, corrosion from exposure to moisture, or damage due to repeated use or mishandling.  

Symptoms of a bad ice chute door spring include:

• The ice chute door not closing properly
• Ice or frost buildup around the ice chute
• Warm air entering the freezer compartment
• Difficulty in dispensing ice

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This yoke and pad assembly connects the dispenser auger motor to the ice bucket auger. Replacing a stripped yoke or worn pad restores torque transfer for smooth, reliable ice dispensing with reduced slipping and noise.

• Connects the auger motor shaft to the ice bucket auger
• Transfers drive torque through a cushioned pad to move ice out of the bin
• Helps reduce shock and slippage in the dispenser drive
• Common symptoms: ice won't dispense, auger doesn't turn, clicking/grinding during dispense

• Disconnect power and remove the ice bin to access the dispenser drive
• Support the auger motor to protect wiring; remove the retaining fastener and the old yoke/pad
• Install the new assembly on the motor shaft; align fully and tighten in the same orientation as the original
• Reassemble components, restore power, and test ice dispensing