Parts for Lg WM9000HVA: Dispenser Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Detergent Box Assembly is an OEM component designed for LG front-load washers utilizing liquid detergent drawers. This assembly contains the detergent receptacle and release mechanism.

Symptoms of a bad detergent box assembly include:

• Incomplete draws during wash cycles  
• Leaks or spills around the detergent compartment
• Difficulty removing or installing drawer  
• Restricted movement of slide rails 

Causes of failure involve mineral buildup clogging valve ports, cracked drawer bases no longer maintaining an airtight seal, or damaged rails failing to extend the drawer.

Replace yours today with this genuine OEM LG assembly to ensure proper detergent dosing on every cycle. Dual compartment design separates liquids from additives uniformly distributing active ingredients. Compatible with Samsung, Kenmore, and Electrolux front-loaders, this upgrade sustains hygienic washing performance.

This multi-wire harness routes power and signals between the appliance control board and multiple components to restore proper electrical connections. Replacing a damaged harness helps stop intermittent faults and restores reliable operation. What it does:

• Delivers power and control signals from the main control to motors, sensors, valves, or switches
• Replaces frayed, burned, or broken wiring that can cause intermittent operation or component failure
• Fixes issues where affected components do not receive power or respond
• Prevents short circuits and poor connections caused by damaged terminals or wiring

• One multi-wire harness as shown

• Disconnect power (unplug or switch off breaker) before starting any repair
• Note connector orientation and routing before removal; take photos if helpful
• Avoid pulling on individual wires—release locking tabs and pull on the connector bodies
• Secure harness away from heat, sharp edges, and moving parts during reinstallation

The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines. This critical component regulates the flow of water into the washing machine tub, ensuring the proper water supply for various wash cycles and functions.

Causes of a faulty water inlet valve assembly in a washing machine can include sediment buildup or clogs, electrical malfunctions preventing proper valve operation, or physical damage to the valve or its components. Normal wear and tear over time can also lead to valve failure.

Symptoms of needing to replace the water inlet valve assembly include:

• Insufficient or no water entering the washing machine tub
• Leaks or water drips around the inlet valve area
• The washing machine failing to fill with water or fill slowly
• Constant water flow or inability to shut off the water supply

This OEM LG part is also compatible with select Kenmore washer models.

The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.

Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.

Symptoms of a bad Water Inlet Valve Assembly include:

• Inadequate filling of the washer drum
• Water entering the drum when the washer is off
• Unusual noises during the fill cycle
• Water that is too hot or too cold, indicating a failure in valve operation that controls temperature

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Water Inlet Valve Filter Screen is an OEM part for LG washing machines. This filter screen is designed to fit inside the water inlet valve, ensuring that debris and sediment are filtered out before the water enters the washing machine. This helps maintain clean water flow and protects the internal components of the washing machine from damage caused by particles.

Causes of a bad Water Inlet Valve Filter Screen can include clogging due to sediment buildup, damage from high water pressure, or wear and tear over time. Regular inspection and cleaning can help prolong the life of the filter screen.

Symptoms of a bad Water Inlet Valve Filter Screen include:

• Reduced water flow into the washing machine
• Long fill times or failure to fill
• Sediment or debris found in the wash water
• Error codes related to water intake issues

This OEM LG part is also compatible with Sears/Kenmore.

The Detergent Box Assembly is an OEM component designed for LG front-load washers utilizing liquid detergent drawers. This assembly contains the detergent receptacle and release mechanism.

Symptoms of a bad detergent box assembly include:

• Incomplete draws during wash cycles  
• Leaks or spills around the detergent compartment
• Difficulty removing or installing drawer  
• Restricted movement of slide rails 

Causes of failure involve mineral buildup clogging valve ports, cracked drawer bases no longer maintaining an airtight seal, or damaged rails failing to extend the drawer.

Replace yours today with this genuine OEM LG assembly to ensure proper detergent dosing on every cycle. Dual compartment design separates liquids from additives uniformly distributing active ingredients. Compatible with Samsung, Kenmore, and Electrolux front-loaders, this upgrade sustains hygienic washing performance.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This dispenser assembly replaces the door-mounted ice and water dispensing unit, restoring reliable dispensing and user control. It fits into the refrigerator door and provides the interface and chute for ice cubes and filtered water. What it does

• Houses the dispensing chute and user-actuated controls for ice and water delivery
• Directs ice and water from the internal lines to the exterior dispenser opening
• Helps stop leaks and drips when seals and valves engage properly
• Common symptom fix: stops intermittent dispensing, leaking at the door, or non-responsive dispenser buttons

• One dispenser assembly

• Disconnect power and water supply before starting any repair
• Remove the freezer/refrigerator door panel as required to access the dispenser assembly (follow OEM service instructions)
• Handle electrical connectors and wiring harnesses carefully; replace any damaged clips or grommets

This inlet hose connects the home water supply to the washer's fill valve to allow proper water flow during cycles. Replacing a damaged inlet hose restores reliable filling and helps prevent leaks and water damage. What it does:

• Carries cold (or hot, depending on installation) water from the household supply to the washer fill valve.
• Stops leaks caused by cracked, split, or deteriorated hose material at the supply or machine connection.
• Resolves slow or no-fill symptoms when a damaged hose is restricting water flow.
• Helps prevent water pooling and floor damage from failing or loose inlet connections.

• One inlet hose assembly

• Turn off both the home's water supply and the appliance power before replacing the hose.
• Drain remaining water from the old hose and fittings, then disconnect fittings carefully to avoid spills.
• Hand-tighten connections, then give an additional quarter turn with a wrench—do not overtighten.
• Inspect fittings and replace any damaged washers or gaskets; check for leaks after reconnecting.

This hose connector is the replacement inlet connection used to link a household appliance's water hose to the appliance. It restores a secure water path and helps stop leaks or restore proper fill behavior. What it does

• Provides a sealed connection between the appliance water inlet and the supply hose
• Restores proper water fill and flow when the original connector is cracked or worn
• Prevents leaks and water damage caused by damaged or loose fittings
• Works with the appliance's inlet assembly to maintain reliable operation

• Turn off water supply and unplug the appliance before starting any work
• Inspect and replace any worn O-rings or seals when installing the new connector
• Hand-tighten connections and then snug with appropriate tools; avoid over-tightening

This hose connector is the replacement inlet connection used to link a household appliance's water hose to the appliance. It restores a secure water path and helps stop leaks or restore proper fill behavior. What it does

• Provides a sealed connection between the appliance water inlet and the supply hose
• Restores proper water fill and flow when the original connector is cracked or worn
• Prevents leaks and water damage caused by damaged or loose fittings
• Works with the appliance's inlet assembly to maintain reliable operation

• Turn off water supply and unplug the appliance before starting any work
• Inspect and replace any worn O-rings or seals when installing the new connector
• Hand-tighten connections and then snug with appropriate tools; avoid over-tightening

The Drain Hose Assembly is an OEM part for LG washing machines. It is responsible for carrying wastewater from the washer's tub to the household drain, ensuring proper drainage during and after each wash cycle.

Causes of a bad drain hose can include wear and tear, kinks, cracks, or blockages from debris and lint buildup. A compromised drain hose can lead to leaks or improper drainage, affecting the washer's performance.

Symptoms of a bad drain hose assembly include:

• Water not draining properly from the washer
• Leaks around the hose or from the back of the washer
• Visible cracks, splits, or kinks in the hose
• Error codes related to drainage issues

This OEM LG part is also compatible with Sears/Kenmore models.

This pivot hanger assembly supports and stabilizes the appliance component it mounts to, restoring smooth movement and alignment. Replace a worn or damaged pivot to reduce noise and prevent misalignment that can affect operation. What it does:

• Acts as the pivot point for the hanger to support the drum/door assembly and maintain correct alignment
• Helps eliminate squeaks, scraping, or jerky motion caused by a worn pivot
• Prevents sagging or uneven movement that can lead to rubbing or binding
• Restores proper mechanical support so the appliance operates quietly and reliably

• Unplug the appliance or disconnect power before beginning any repair
• Basic hand tools may be required; follow the appliance service manual for disassembly steps
• Inspect surrounding components (mounts, bearings, fasteners) and replace if worn

This spring-style hose clamp secures a washer's rubber hose to its fitting to maintain a tight, leak-resistant seal. Replacing a weakened clamp helps stop drips and keeps the hose firmly in place during operation.

• Provides constant spring tension to hold a rubber hose on its port
• Helps prevent leaks at the connection point
• Resists vibration so the hose doesn't back off the fitting
• Common signs include water at a hose joint, a loose/detached hose, or a rusted/broken clamp

• Disconnect power and turn off water supply before servicing
• Place a towel or pan to catch residual water from hoses
• Use pliers to compress the ears, slide off the old clamp, position the new clamp behind the hose bead, and release evenly
• After reassembly, run a quick test cycle and check for leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.