How to Troubleshoot & Replace Ge AP3205796 / WB16K10035 Bake Burner W/Ignitor

I replaced the burner tube and the igniter. Problem solved. Very easy repair. 

Replace burner 

Researched and purchased a new Bake Burner kit including the igniter from AppliancePartsPros.com My GE gas stove model JGB400SEP2SS wasn't specifically featured in any online video however the APP repair video was similar. **Note** To access the Igniter Wire Harness and Bake Burner bracket screws, remove the bottom storage drawer completely. 1/4" socket/ratchet required and 6" extension is helpful to reach the rear panel screws holding the Bake Burner. 

Did an internet search and determined the problem was likely a faulty igniter. I ordered the igniter and in the process of replacing it found out the burner had a hole in it. I then ordered the wrong replacement burner, returned it, ordered the correct burner and made the replacement. In the end the job was very easy and now my oven is working great. Both parts did need replacing and I should have done a more detailed check before placing my original order. My appliances are all about 15 years old and this is the second one I have had to fix in the last year. But being able to order parts directly from this site and the helpful videos people have posted online have made it possible for me to fix both with no prior experience. Saved me a bundle of money. 

Replaced burner and igniter, but don’t know why I needed the burner 

This repair was a nightmare! The stove is so old that diagrams were very hard to find. The connections were deeply buried in the machine that was loaded with extra shields and inaccessible screws. Had to work through the back and by removing the warming drawer. What typically is a pretty straightforward repair was made difficult by the design of the range. I used the APP repair assistance by chat and phone and they were friendly and really tried to help, but there were no videos for this old monster. Still, I got it done and the oven is heating like new. So for the dreadful experience with the Kenmore design (can I give minus stars?), I'd give this 1 star. But I'll give higher rating because APP gives such a priority to helpful DIY service. 

Installed a new bake burner and igniter. I did it myself. 

Googled diagnosis and installation procedure, ordered part, got two day delivery and put it in. Easy peasy. I had to search for a replacement screw to attach the igniter to the burner. It would be nice if GE included the necessary screws. Including hunting for screw, vacuuming burner area and general area clean up, it took me 30 minutes. The replacement burner was "L" shaped and the end that fit over the gas feed was slightly shorter than the original and I was fearful of a potential gas leak. However, it was just long enough. I would feel better if it was just that little bit longer. 

Ordered a new bake burner and igniter and installed. Twenty-minute job job. Parts fit and worked perfectly!!! 

Replaced the Ignitor and Bake Burner. The old ignitor was worn out and the burner tube corroded and had a hole in it.