Nelson T Mobile , AL April 26, 2016 Plastic console capture tabs and switch tabs broke plastic switch split Unplugged the dryer. Disconnected the exhaust hose w/ 5/16" nut driver. Removed all knobs. Removed 3 Phillips head screws behind the console. Removed all switches and controls by lifting locking tabs and turning counter clockwise. Installed switches and controls into new console by inserting into hole(s) and turning clockwise until locking tab engaged. Positioned console capture tabs back in their slots and snapped console back in place with the back plate. Re installed the tree screws. Re connected the exhaust hose and plugged the dryer back in. Test all switches and controls. Wife thinks I'm smarter than Einstein and now I'm a hero. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Christopher B Hahnville , LA April 12, 2016 Would not stay on The belt tension switch was bad replaced . thanks to your video how to do it took me all of 20 minutes first time and worked great Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Michael S Scottville , MI November 09, 2025 Start knob broke off had to replace switch Replaced switch and knob Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Norbert K Rochester , NY September 06, 2025 Appliance: Model GE GAS DRYER Knob connection broke I attached parts but had a neighbor check my work. He had more experience plus also recommended your website. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Matthew M Colorado Spgs , CO June 30, 2025 Needs knob Ordered new knob Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Sharon W Montour Falls , NY June 20, 2025 Knobs were cracked Ordered new knobs and replaced them. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Timothy A Paw Paw , WV May 28, 2025 Appliance: General Electric Electric Dryer DWSR483EG9WW The start switch started sticking in the start position I ordered a new start switch Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Sandra F Georgetown , DE March 12, 2025 The control knowcame off my dryer I called a repairman to come and put it back on. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Dave W Little Egg Harbor , NJ March 15, 2024 Appliance: General Electric Electric Dryer DBXR463EG0CC Timer switch was bad. Unplugged unit, removed 3 screws ion back panel, twisted switch off, removed 3 wires, then reattached everything and plugged back in and tested. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Willie J Rocky Mount , VA December 09, 2023 On off switch broke. Ordered the start switch and a control knob. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers