Bradley M Bellevue , NE July 31, 2021 Bad GE oven control board. Ordered replacement part which thankfully had a wiring diagram as the new part connections were designed differently. Easy to install and reconnect the wires. Took 10 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Zachary C Crozet , VA June 02, 2020 Appliance: Model J BP66W Y1WW Upper element (broil) would not turn off even with oven off tripping temperature alarms. Pulled broil element control wire on the control board to ensure that it was a control error, and not a shorted element or relay. Replaced control board. Required some minor re-wiring, since wire colors and connections were no longer identical with the updated part. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers, Socket Set
David F Simi Valley , CA March 09, 2020 Appliance: Model WB27X10311 Oven temp control bad. Replaced board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Paul D 374 , OR November 26, 2019 Bottom element would not come on Replaced control circuit assembly Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Joseph L Wantagh , NY May 17, 2019 Electronic control out of order Replaced electronic control panel Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
William B Bedford , PA April 02, 2019 Oven and broiler would not turn off even with the oven knob set to off. The oven would stay on. Replaced Electronic Control Board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Greg T Melvin , MI March 11, 2019 Appliance: General Electric Electric Range JBP78WY1 Lower element in stove did not heat Did ohm test on element and temperature sensor, both passed. Replaced control board. Needed to modify one wire, trimmed plastic terminal clip and receptical box to allow old wire to plug into new control board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers, Socket Set
Samuel G H Goldsboro , NC January 11, 2019 GE oven baking element replaced, but oven still not baking. Ordered and replaced control board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Chris M Brussels , WI May 27, 2018 Control board, no lights and oven would not work Got a new Control Board Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Audrea B Atlanta , GA October 15, 2017 Broiler element would not turn off when the oven is on Replaced the electronic control board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers