Michael E Mishawaka , IN July 10, 2020 Appliance: Whirlpool Gas Range WFG320M0BB0 Oven would almost shut off after it would reach set heat and this was intermittent also before it got real bad we could not make an adjustment to the cooking time or it would shut down Replaced the igniter. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Dennis L Altoona , PA June 16, 2020 Bad ignitor I’ve done this repair before so I was able to repeat the same process. It’s just two screws and two wire nuts. I had to remove the cover plate on the back of the stove. Very simple process. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Deb S Bellevue , OH May 30, 2020 My oven wouldn't turn on. Replaced the ignitor switch and it only took 2 days to get the part! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Debra P Johnston , RI May 19, 2020 Oven not hearing up to the temp. Ordered part watched diy video n wallah perfect! All set thx much you guys are best. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers
Matthew G Apple Valley , CA May 18, 2020 Appliance: Model WHIRLPOOL-ABOUT 10 YRS OLD Oven/broiler igniter burned out. Replaced same Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
John L Battle Creek , MI April 21, 2020 Ignitor went out. Broiler handle broke and burner knob was missing. Unplugged oven, removed cover from where ignitor was plugged in, disconnected plug for ignitor, pulled racks from oven, removed bottom pan and burner plate, then unscrewed 2 screws holding ignitor in place and reversed steps to put it back together. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Vince G West St. Paul , MN March 31, 2020 Oven ignitor went out I replaced it with the part that I bought from Appliance Parts Pros. It went fairly smooth and the oven is working better than ever. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
John C Centereach , NY March 28, 2020 Gas stove ignitor was taking 10 to 20 minutes to light. There were no instructions, so I found a YouTube video which covered most of how to do it. Unfortunately, the plug would not come through the back oven wall as shown. Then I discovered that the repairman we used before could not get it through and had stripped the wire and pig tailed it. We pulled the stove out and found the connector plug was right there in back. Unplugged it and pushed the new plug through the hole in back of the oven. From that point it was just a matter of putting it back together. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Mickey M Springfield , OH February 28, 2020 Oven igniter Took off shield, removed screws nuts, removed oven bottom and heat shield. Replaced defective igniter. Replaced with new one and replaced shield screws nuts. Oven works like new. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Nancy G Round Rock , TX February 01, 2020 My oven stopped working. Googled the issue, found the part on Appliance Parts Pros, ordered it, received it the next day, watched the video and tada! A perfectly working oven ?? and a very satisfied customer! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set