The igniter wasn't glowing or was barely glowing, would not ignite the gas in my oven.
I pulled the oven away from the wall so I could unplug the igniter. To access the igniter, I had to go in from the front. Open the oven, remove the racks. Removed the lower metal plate, only a couple screws holding it in place. Once it was out I had clear access to the igniter. One screw held the igniter in place. Unscrewed it and put the new one in, ran the wire out the back of the oven. I put the plate back, put the racks back. Plugged the new igniter in and pushed the oven back. When I turned on the over I could see the glow from the igniter and then heard the gas light. It took around 30-45 mins because it is the first time. The next time would probably take 15min now that I know what to do.