Gerlinde T Pahoa , HI November 19, 2016 Appliance: Maytag Washer MVWX500XW0 Water inlet valve clogged from algae Remove the two valves at back of washer, only 4 screws, remove the electrical clamps, replace with valves, easy, 20 minutes to fix, and a woman did it, saved $320.00, yahoo Read More... 11 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Wrench Set
Kevin O South Amboy , NJ January 15, 2016 Appliance: Model MAYTAG Washing machine cold water wouldn't shut off I unplugged the washer and the water continued to run. I then shut off the cold water valve and it stopped. I decided the cold water inlet valve was not closing and needed to be replaced. I ordered the part from Appliance Parts Pro on a Sunday night and received it on Tuesday. The part was easy to install. Only held in with 2 screws. The wiring was easily swapped to the new part. Everything worked great. Read More... 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Steven S Manhattan , KS February 10, 2024 Appliance: Maytag Washer MVWX600XW0 Noisy water inlet valve. Replaced both hot and cold valves. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Adjustable Wrench, Nut Drivers, Screwdrivers, Socket Set, Wrench Set
Dave K Tolland , CT February 15, 2022 Appliance: Model MAYTAG BRAVOS WASHER Cold water leaking into tub after the cycle ztopped Replaced cold water inlet valve. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
Alexander S Clayton , NC January 06, 2019 Appliance: Maytag Washer MVWX700XW1 Slow water drip into washer after cycles Over the past month, I had noticed a small drip developing after running larger cycles. I looked around to get an idea of what the issue could potentially be and narrowed it down to one of the input water valves. I ordered both the cold and hot (just in case), but from playing with the shutoff valves, I was able to determine it was likely the cold water valve. I had previously ordered parts from AppliancePartsPros and their instructional videos are top notch. I ordered the part and had it within 2 days and followed the video. I was pretty familiar with my washer from replacing the gearcase 2 years ago, but this an incredibly easy job. I spent more time getting a bucket/towels/tools together than I did actually replacing the valve. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Wrench Set
Joseph M Hawthorne , NY December 10, 2018 Appliance: Maytag Washer MVWX500XW0 Water would not shut off once it started to go into clothes washer! Replaced both Cold & Hot water Inlet valves. Very quick & easy job. Thank you for the super quick shipping!!!! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
Meizhong D Madison , WI January 12, 2026 Appliance: Maytag Washer MVWX655DW1 In regular wash modes maytag bravos washer cannot add water so stuck at sensing stage but it can run in rinse and spin mode Replacing cold water inlet valve. shipping from appliancepartspros store was fast Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers, Wrench Set
Matt O Fort Worth , TX November 03, 2025 Appliance: Maytag Washer MVWX655DW1 Failed cold water inlet valve My tool collection is lacking at the moment, and I wasn't sure I'd be able to repair (or even figure out what was wrong with) my washer. So, I had originally paid a repairman to come by and diagnose and/or repair my washer. Once he had diagnosed the problem and told me the price to repair (nearly $500), I paid for his diagnostic, found the part online at appliancepartspros.com, and replaced it the same day it arrived. It was a very simple procedure, and the website had a video walk me through the process. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Adjustable Wrench, Nut Drivers
Todd D Minster , OH October 16, 2025 Water not going in could here buzzing Replaced water inlet valves Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers, Socket Set, Wrench Set
Robert B Morehead City , NC April 05, 2025 No cold water I replace the cold water inlet valve Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers, Socket Set