Opened up dryer (ck YouTube for specific model) and removed front panel. Removed the cover over the blower wheel. Initially thought belt had failed. Once open, saw the belt was still intact. Removed the drum and the belt. Attempts to rotate the blower wheel / motor shaft were a challenge due to bearing(s) having failed. In attempting to remove the Blower wheel the old wheel (17.5 yo) cracked / split. Snapped the remaining pieces of the old blower wheel off, removed those pieces thus gaining access to the three screws holding the blower wheel "assembly in place. Labeled all the wire connections / photo'd same as to the motor (overkill). Removed the old motor / mount from the machine then swapped out the new motor onto the motor frame. Reversed the process and put the machine back together. Instruction sheet for the new motor "connections" is somewhat blurry due myriad copying - that said the process is pretty simple.