Parts for Ge ABS45DF1WS: Door & Drawer Parts

The Oven Rack is an OEM part for GE ovens. It provides a stable and reliable surface for placing baking sheets, pans, and dishes inside the oven for cooking or baking.

Causes of a faulty oven rack can include wear and tear over time, bending or warping due to heavy items or improper handling, or damage from cleaning or harsh chemicals. A damaged or malfunctioning oven rack can lead to uneven cooking, unstable support for cookware, or difficulty in removing or inserting the rack into the oven.

Symptoms of a bad oven rack may include:

• Uneven cooking or baking results
• Difficulty sliding the rack in or out of the oven
• Bent or warped rack structure
• Instability when placing cookware on the rack

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This door hinge is the replacement mounting hinge that supports and pivots an appliance door, restoring proper swing and alignment for safe, reliable opening and closing. Use it to stop sagging, rubbing, or uneven door gaps. What it does

• Provides a secure pivot point to support the appliance door and maintain correct alignment
• Restores smooth opening and closing when worn or damaged hinge hardware causes squeaks or sticking
• Prevents door sag and uneven seals that can affect operation or allow heat/cold to escape
• Works as a direct-fit replacement when the original hinge is worn, bent, or broken

• Disconnect power (or gas) and remove any stored items from the door before beginning work
• Support the door during removal and reinstallation; larger doors may require a second person
• Use appropriate hand tools; tighten mounting screws to secure hinge but avoid overtightening
• If alignment issues persist after installation, check hinge mounting surfaces and door stops

This drawer body is the metal pan that forms your range's lower drawer. Replacing a bent or rusted body restores alignment so the drawer slides smoothly, stays on its tracks, and safely supports its contents.

• Forms the structural base of the lower drawer assembly
• Attaches to the drawer front and the side glides/rails
• Keeps the drawer square and aligned for smooth travel
• Damage may cause sticking, scraping noises, sagging, or the drawer coming off track

• Disconnect power and let the appliance cool completely before servicing
• Remove the drawer; transfer the existing drawer front, handle, and any brackets to the new body as required
• Inspect and align the slides/rails, then seat the drawer on the tracks
• Test for smooth operation before loading the drawer

This foil door is the inner door panel that restores the microwave's inner finish and protects the cavity from damage. It helps maintain proper door fit and keeps the oven interior looking clean and intact. What it does:

• Replaces a damaged or dented inner door panel to restore a smooth interior surface
• Protects the microwave cavity from food splatter and wear
• Helps maintain correct door alignment and sealing when combined with other door components
• Common symptom: visible dents, peeling, or torn inner door finish

• Disconnect power and ensure the appliance is completely cool before starting
• Removal may require detaching the outer door and fasteners; retain screws and hardware
• Handle carefully to avoid sharp edges and prevent further damage to the new panel

This foil door is the inner oven panel designed to protect the oven cavity and reflect heat for more even cooking. It replaces a damaged or deteriorated inner panel to restore oven surface protection and appearance. What it does:

• Replaces torn, dented or corroded inner foil panel inside the oven cavity
• Helps protect the oven liner and components from heat and food debris
• Restores a smooth, reflective surface that aids in even heat distribution
• Useful when the original foil panel is peeling, punctured, or badly stained

• One foil door (inner oven foil panel)

• Install with oven power disconnected; follow OEM service instructions
• Requires basic disassembly of the oven door or inner liner; handle edges carefully — metal may be sharp
• Confirm fit with the oven model and part number before installation

Includes 12 washers.

A welded door liner assembly that replaces a damaged or dented inner door shell to restore proper sealing and appearance. Designed as a direct-replacement inner surface for affected appliance doors. What it does

• Replaces a cracked, dented, or otherwise damaged inner door liner that can allow drafts or interfere with proper door closure.
• Restores the door's interior surface so gaskets and inner components mount correctly.
• Helps eliminate cold or heat leaks caused by a compromised liner.
• Improves door appearance and prevents further damage to internal door parts.

• Disconnect power and follow OEM service manual instructions before starting work.
• Use safe handling practices — edges may be sharp and assembly can be heavy; use gloves and eye protection.
• May require removing door panels, trim, and hardware; retain mounting screws and check gasket seating during reassembly.

The Gasket Door Assembly is an OEM replacement part for GE ovens. This gasket provides a seal around the oven door, ensuring that heat is retained inside the oven for efficient cooking and baking. It helps to maintain the correct temperature and prevents heat from escaping, which can affect cooking performance and energy efficiency.

Causes of a bad gasket door assembly can include regular wear and tear, exposure to high temperatures, and physical damage such as cuts or tears. Over time, the gasket can lose its elasticity and sealing capability.

Symptoms of a bad Gasket Door Assembly include:

• Heat escaping from the oven door
• The oven taking longer to preheat or maintain temperature
• Uneven cooking or baking results
• Visible damage or gaps in the gasket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This side door insulation panel installs inside a refrigerator door to help maintain internal temperature and reduce heat transfer. It replaces damaged or missing insulation to help the door seal and cooling performance. What it does:

• Fills the cavity inside a refrigerator door to limit air and heat transfer
• Helps the gasket maintain a consistent interior temperature by supporting proper door structure
• Commonly replaced when the original insulation is cracked, waterlogged, or missing
• Works as a direct-fit replacement for the specified OEM part number

• One side door insulation panel

• For safety, unplug the appliance or shut off power before starting repairs
• Remove the interior door panel or liner to access the insulation; handle foam carefully to avoid tearing
• Use manufacturer-recommended fasteners/adhesives if reattaching insulation; do not compress or overfill the cavity

A small mounting spacer that positions and secures components inside the appliance, helping maintain correct clearances and alignment for reliable operation. Replaces worn or missing spacers to reduce rubbing, vibration, or misalignment. What it does:

• Provides a fixed gap or support between parts to prevent contact and wear
• Keeps panels, brackets or assemblies properly aligned during operation
• Reduces vibration and noise caused by loose or missing spacing hardware
• Helps ensure correct airflow or clearance where specified by the manufacturer

• Install with the original fasteners and in the same orientation; do not force or deform the spacer
• Verify the mating surfaces are clean and free of debris before installing
• Disconnect power to the appliance before starting work and follow basic electrical safety
• Replace any other damaged mounting hardware to ensure a secure repair

This panel door replaces a damaged or worn outer oven door panel to restore the appliance's appearance and protect inner door components. It fits the oven's front door assembly and provides a factory-style finish. What it does

• Restores the oven door's outward appearance after dents, scratches or corrosion.
• Protects inner door layers, insulation and seals from damage and debris.
• Helps maintain proper alignment and fit of the door assembly.
• Reduces drafts or heat loss caused by a compromised outer panel.

• One outer panel door

• Disconnect power (and gas supply, if applicable) before beginning any repair.
• Use gloves to avoid cuts from sharp metal or glass edges; protect surrounding surfaces.
• Follow OEM instructions for disassembly/reassembly to avoid damaging door springs, hinges or glass layers.

The Oven Drawer Glide is an OEM replacement part for GE electric and gas ranges. It functions as the suspension mechanism facilitating smooth extension and retraction of range drawer shelves.

Causes of a bad drawer glide can include wear from years of use, damage from heavy pots or pans straining the glide, or loose mounting fixtures failing to securely support shelf weight.

Symptoms of a bad drawer glide include:

• Difficulty accessing or storing items within drawers
• Squeaking or grinding noises when opening/closing
• Drawers failing to fully extend or retract
• Risk of entire drawer assembly detaching over time

This OEM GE part is also compatible with some Hotpoint, RCA and select Kenmore electric and gas range models.

This drawer mounting bracket secures the lower storage/drawer assembly to the range/cabinet, restoring stable alignment and smooth opening. Durable stamped metal bracket used where the drawer frame needs a reliable support point. What it does:

• Provides a secure attachment point for the appliance storage drawer or lower kick drawer
• Keeps the drawer aligned to prevent sagging, rubbing, or uneven movement
• Restores stability if original bracket is bent, broken, or missing
• Helps eliminate rattling or excessive play in the drawer during use

• One drawer mounting bracket

• Inspect surrounding drawer frame and fasteners; replace missing or damaged screws with OEM-specified hardware
• Disconnect power and ensure range is cool and stable before working on lower drawer assemblies
• Minor hand tools typically required; handle sharp edges carefully and wear gloves if needed

This liner drawer replaces a damaged or cracked inner refrigerator drawer to restore storage and containment in the fresh-food compartment. Durable molded plastic matches original fit for smooth sliding and easy cleaning. What it does:

• Replaces a broken, cracked or warped inner drawer that can no longer hold items securely
• Restores proper alignment so the drawer opens and closes smoothly
• Helps contain spills and keeps produce or packaged foods separated
• Improves interior organization and usable shelf space

• 1 liner drawer

• High-level replacement: remove contents, lift out old drawer and slide in the replacement; your model diagram for exact removal steps
• Use care to avoid scratching interior surfaces; wear gloves to protect hands from sharp edges
• Verify correct orientation and track engagement before loading the drawer
• If the drawer slides or tracks are damaged, inspect and replace those parts separately

This crystal clip is a small replacement retainer designed to secure decorative crystal trim or a small plastic component on select appliances. It restores proper fit and keeps trim pieces from shifting or rattling during use. What it does

• Secures crystal trim, decorative accents, or small plastic pieces to the appliance frame
• Keeps trim aligned and prevents rattling, vibration noise, or loose components
• Replaces a broken, cracked, or missing clip to restore a snug fit
• Works where a compact push-in retainer is required

• Basic hand tools may be required; access panels or trim removal might be necessary
• Push-in or snap-fit installation; avoid forcing parts to prevent damage
• Disconnect power to the appliance before starting work when removing electrical or illuminated trim

This top-door insulation replaces the foam insert behind the refrigerator/freezer door panel to help maintain interior temperature and reduce heat transfer. Restores proper door insulation for more consistent cooling. What it does

• Provides thermal insulation behind the top door panel to help keep cold in and heat out
• Helps reduce frost buildup and temperature fluctuations near the door area
• Limits air transfer that can increase compressor run-time and energy use
• Restores proper fit and support for the inner door panel

• Disconnect power to the appliance before starting any repair.
• Remove the inner door panel fasteners and lift the panel to access the old insulation; handle panels carefully to avoid damage.
• Replace with the exact OEM insulation and resecure the inner panel per manufacturer instructions.
• If clips, adhesive, or fasteners are damaged or missing, replace them before reassembly.

This is a replacement drawer panel that restores the exterior look and operation of your refrigerator drawer. It provides a finished front surface and helps the drawer close and seal properly. What it does

• Replaces a cracked, dented, or scratched drawer front that affects appearance.
• Restores proper drawer alignment and helps maintain a tight fit against the cabinet.
• Prevents items from catching on a damaged edge and improves overall usability.
• Matches OEM fit and attachment points for direct replacement when the correct part number is used.

• Includes 1 drawer panel.

• Remove all food and empty the drawer before starting; use care lifting heavy items.
• Typical install requires removing the drawer and unfastening retaining screws or clips—keep track of hardware.
• Wear gloves to avoid cuts from sharp edges and protect finish from scratches during handling.