Parts for Ge PGB940SEJ7SS: Door & Drawer Parts

Base spacer for gas ranges. Installs at the bottom of the range to provide proper spacing and support. Replace if cracked, broken, or missing.

Speed nut clip secures your range oven bottom panel. Replace when missing or damaged to prevent panel rattling. Verify fit with your model number.

Oven not heating on bake? This bake element heats the bottom of your oven cavity for even cooking. Fixes broken or visibly damaged heating elements.

Right-side door hinge for gas ranges. Replace this pivot component if your oven door is misaligned, sagging, or the hinge is cracked or damaged from wear.

Pivot hinge that supports the range oven door for smooth opening and closing. Replace if broken, cracked, or door won't stay properly aligned.

Left hand side

Positions and supports internal components to maintain proper alignment and clearance. Replace if cracked, broken, or missing to restore stability.

Right hand side

Range bottom panel that forms the base of the cabinet frame. Replaces damaged, rusted, or missing bottom panels to restore structural integrity.

Support base for electric and gas ranges. Installs at the bottom to provide structural stability. Replace if cracked, broken, or damaged over time.

Support base for range and wall oven. Provides stability and structural support for the appliance. Replace if cracked, broken, or damaged over time.

Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.

Secures the heating element in your range. Replace if loose, damaged, or causing element misalignment. Confirm fit with your model number for proper installation.

Left-hand drawer slide assembly for electric and gas ranges. Replaces cracked, broken, or worn slides that cause drawers to stick or misalign.

Replace your range's access spring cover if it's cracked, broken, or missing. This protective housing installs over the spring mechanism for a complete look.

Right-hand slide assembly for range warming drawers. Replaces cracked, broken, or worn drawer glides that prevent smooth drawer operation.

Wire clip secures electrical connections to heating elements in ranges. Replace if worn, cracked, or loose to restore proper contact. Verify fit with model.

Replacement front panel for gas range storage drawer. Installs on the lower drawer to restore appearance when the original is scratched, dented, or damaged.

Replacement outer glass panel for range oven doors. Installs on the exterior side to restore appearance and viewing. Order when cracked or broken.

Replacement mounting screws for ranges and ovens. Secures panels, brackets, and components. Includes 12 screws. Order when original screws are missing.

Insulation panel for electric and gas ranges. Installs inside the range cavity to provide thermal protection. Replace if torn, deteriorated, or missing.

Insulation pad that installs in the warming drawer cavity of your gas range. Replace if worn, damaged, or missing to restore heat retention and soundproofing.

Replace cracked, shattered, or stained oven door window glass. Clear glass pane restores viewing into the oven cavity. Installs in door assembly.

Inner door liner weld assembly for range ovens. Installs inside the door to restore structural integrity. Replace if cracked, bent, separated, or missing.

Secures and supports your range drawer to prevent sagging and ensure smooth operation. Replace when drawer misaligns or wobbles. Confirm fit with your model.

If your oven isn't maintaining temperature or has poor heat distribution, this barrier door assembly restores proper sealing and airflow control.

Replacement oven door handle assembly with end caps for gas and freestanding ranges. Installs on the oven door. Needed when handle is broken, cracked, or end caps are missing.

A replacement handle mounting bracket that secures an appliance door handle to the door surface for safe, stable operation. Restores a loose or broken handle attachment so the handle stays firmly in place during use. What it does:

• Secures the door handle to the appliance door and provides a stable attachment point.
• Replaces a broken, cracked, or bent bracket that lets the handle wobble or detach.
• Helps eliminate handle movement and restore normal handle function.
• Compatible with the original handle mounting points to maintain proper alignment.

• Safety first: disconnect power and/or unplug the appliance before starting any repair.
• Use basic hand tools (screwdriver, socket) to remove trim or screws holding the old bracket; keep fasteners for reassembly.
• Support the handle while removing and installing the bracket to avoid dropping or damaging the door.
• Do not overtighten screws; snug fasteners to secure the bracket without stripping threads.

This handle bracket secures a refrigerator/freezer door handle to the appliance, restoring a solid grip and proper door operation. It replaces a worn, cracked, or broken bracket to keep the handle aligned and stable during use. What it does:

• Provides the mounting support for a door handle so the handle stays firmly attached
• Restores proper handle alignment to reduce wobble or shifting when opening the door
• Stops slipping or intermittent detachment caused by a cracked or damaged bracket
• Helps prevent further damage to the door or handle from continued use with a broken mount

• One handle bracket

• Designed for direct replacement; compare part number to the original before ordering
• Basic hand tools typically required; handle and trim may need removal to access bracket
• Disconnect power (and empty door area) if working near electrical components or lights
• If mounting hardware isn't present, reuse the original screws or order the specific fasteners listed by the OEM

Fiberglass gasket cord for range door or panel sealing. Replaces worn, frayed, or missing cord that no longer seals properly. Ensures tight fit.

A replacement inner door insulation that restores the refrigerator door's thermal barrier to help maintain proper temperature and reduce condensation. Fits behind the door panel to support efficient cooling and prevent cold air loss. What it does:

• Replaces damaged or compressed insulation that can allow cold air to escape
• Helps reduce moisture buildup and frost on the door interior
• Supports consistent internal temperatures for better food preservation
• Dampens noise and helps the door close more evenly

• Disconnect power to the appliance before starting any repairs
• Remove the door panel and any trim or handles to access the insulation
• Handle carefully around sharp sheet metal and retain any fasteners for reassembly
• Use the exact replacement part number for proper fit; avoid forcing or trimming the insulation

Front bottom trim piece for electric and gas ranges. Replaces cracked, broken, or missing trim along the bottom edge of your range front panel.

Decorative badge assembly that mounts on the front of your range. Displays brand and model information. Replace if cracked, peeling, or missing.