Parts for Ge PGB940SEJ7SS: Gas & Burner Parts

Converting your gas range from natural gas to propane? This LP conversion kit includes all necessary orifices and components for safe fuel type conversion.

Converts your gas range to liquid propane for high-altitude use. Ensures proper gas flow, easy ignition, and stable flames in low-pressure conditions. Confirm fit with your model number before ordering.

Convert your gas range for proper operation above 2000 feet elevation. This high altitude kit adjusts air-fuel mixture for optimal performance at altitude.

Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.

If your ice maker isn't filling properly or ice cubes are misshapen, this inlet jet restores correct water flow to the dispenser and ice-making area.

Surface burner base that covers and protects the burner cavity on gas ranges. Replace if warped from heat, cracked from impact, or corroded over time.

Burner not heating or won't turn on? This switch harness restores power between your range's infinite control switch and cooktop burner wiring.

Fix uneven or smoky burner flames with this gas range burner injector. Restores proper gas flow for even heating. Simple DIY installation.

This manifold pipe routes gas from the range's valve assembly to the individual cooktop burners, restoring safe and consistent fuel delivery for reliable burner operation. Replace a damaged or corroded manifold to stop leaks and restore proper flame distribution. What it does:

• Channels gas from the control valve block to each burner for ignition and steady flames
• Helps maintain even burner performance and consistent heat across the cooktop
• Failsafe for preventing gas leaks when intact; visible damage, corrosion, or cracks can cause unsafe operation
• Commonly replaced when burners won't light, show weak or irregular flames, or after leak detection

• Turn off the gas supply and unplug the appliance before servicing.
• Inspect and replace any damaged seals, gaskets, or fittings when installing the manifold.
• Test for leaks with a soap solution or approved leak detector after installation; do not use an open flame.

Gas burner not lighting or flame too weak? Replace the natural gas orifice spud to restore proper gas flow. Quick 15-minute fix for most models.

Fix weak or unstable flames by replacing a clogged or damaged burner orifice spud. Threads into the holder to meter gas flow for reliable ignition.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

1/4-20 threaded screw secures panels, brackets, and internal assemblies in ranges, ovens, and cooktops. Replace missing, stripped, or corroded fasteners.

Weak or uneven burner flames? This orifice holder secures the gas orifice in the burner tube for stable fuel delivery and consistent flame performance.

Replace your gas range oven orifice holder if burners won't light or you're converting between LP and natural gas. Simple socket wrench repair for most DIYers.

Uneven flames or weak ignition? This orifice holder secures your gas range burner orifice for proper alignment and consistent gas flow to the burner.

Fix uneven flames or burner ignition issues with this gas range bake burner tube. Delivers gas from valve to burner for proper heating and baking.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Insulation pad that wraps around the burner box assembly beneath the cooktop. Replace if torn, compressed, disintegrated, or missing to restore heat protection.

Dual oval burner injector for gas ranges. Installs into the center burner assembly. Replace if cracked, clogged, or missing for proper gas flow.

Orifice spud that controls gas flow to burners on gas ranges and cooktops. Replace if cracked, clogged, or damaged to restore proper gas distribution.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Burner won't light or flame is uneven? This orifice spud secures the gas orifice for consistent flow and proper ignition. Simple DIY fix for range burners.

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Fix burners that won't ignite or have uneven flames with this gas range valve and burner assembly. Controls gas flow and flame intensity for each burner.

Fix weak or uneven flames on your gas range. This burner valve controls gas flow and flame distribution. Common repair for seized or faulty valves.

Burner won't light or flame is uneven? This gas range burner valve controls gas flow to restore reliable ignition and consistent flame on your stovetop.

Fix burners that won't light, adjust, or maintain flame. This valve regulates gas flow to individual cooktop burners. Moderate DIY repair with hand tools.

Fix water leaks or no water flow in your range. This dual valve tube controls water delivery through your appliance's tubing assembly. Direct fit part.

Burner won't light or flame is weak or uneven? This injector assembly meters gas flow from the manifold to restore proper ignition and stable flame.

This dual oval orifice holder secures two burner orifices and helps deliver the correct gas flow to the cooktop burners for consistent ignition and stable flames. Replaces a worn or damaged holder to restore proper burner performance. What it does:

• Holds and positions two oval gas orifices so the burner receives correct gas flow
• Restores even flame distribution when the original holder is cracked, bent, or missing
• Helps resolve burner issues like weak, uneven, or inconsistent flames and intermittent ignition
• Keeps orifices aligned to the burner head for reliable lighting and efficient combustion

• One dual oval orifice holder

• Turn off gas supply and power to the appliance before starting any work
• Remove burner grates and caps; handle orifices carefully to avoid damage or misalignment
• Tighten securely but avoid overtightening; inspect surrounding gaskets and seals and replace if damaged

Burners won't light or spark weakly? This electrode and harness assembly restores reliable ignition spark delivery to gas range burners for consistent, safe lighting.

Fix oven ignition issues or gas smell problems with this valve control assembly. Controls gas flow to burners for precise flame regulation.

Oven won't heat or takes forever to preheat? This glowbar igniter heats up to ignite your gas burner. Common DIY fix restores proper oven temperature.

Fix a gas oven that won't heat or takes too long to preheat by replacing a weak or cracked igniter. This hot surface igniter lights the burner reliably.

Carries gas from the pressure regulator to the burner valve manifold on your gas range. Replace if the tube is damaged, cracked, or leaking to restore safe fuel flow.

Flame deflector for gas ranges. Installs above the burner to direct heat evenly. Replace if cracked, warped, or missing for proper heat distribution.