Parts for Kenmore 795.73033410 (79573033410, 795 73033410): Door Parts

The Door Bracket is an OEM part for LG refrigerators. This bracket supports the refrigerator door by providing stability and ensuring proper alignment during opening and closing. It plays a crucial role in maintaining the door’s secure fit, which is essential for maintaining the internal temperature and efficiency of the appliance.

Common causes of a bad door bracket include wear and tear from frequent use, impact damage, or corrosion due to moisture.

Symptoms of a bad door bracket include:

• The refrigerator door not closing properly
• The door sagging or being misaligned
• Unusual noises when opening or closing the door
• Gaps in the door seal leading to temperature inconsistencies

This OEM LG part is also compatible with Sears/Kenmore.

This door gasket assembly forms the sealing perimeter for a refrigerator door to help maintain proper cold temperatures and reduce air leaks. Replacing a worn gasket restores a tighter seal and helps prevent frost and moisture buildup. What it does:

• Seals the gap between the door and cabinet to keep cold air inside
• Reduces frost buildup and prevents warm air infiltration
• Helps maintain consistent interior temperature and efficient operation
• Commonly replaced when the seal is cracked, torn, warped, or no longer grips

• Disconnect power to the appliance before starting any repair
• Clean the door flange and mating surfaces thoroughly before installing the new gasket
• Seat the gasket evenly into the channel, working from one side and smoothing to avoid twists
• If the gasket is stiff, warm gently per OEM guidance to aid forming; do not use open flame or excessive heat

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

This door foam assembly restores the thermal insulation inside a refrigerator door to help maintain consistent cooling and reduce condensation. Use it to replace compressed or damaged foam that lets cold escape through the door. What it does:

• Reestablishes the door's internal thermal barrier to help maintain proper temperature
• Reduces door-surface condensation or frost caused by lost insulation
• Helps prevent warm spots and uneven cooling near the door
• Supports proper sealing and energy efficiency when paired with intact gaskets

• Unplug the appliance before starting any repair
• Removing the door panel/pocket is usually required; handle panels and clips carefully
• Avoid puncturing or compressing the foam during installation
• Follow the manufacturer service manual or instructions for disassembly and torque specifications

This door foam assembly restores the thermal insulation inside a refrigerator door to help maintain consistent cooling and reduce condensation. Use it to replace compressed or damaged foam that lets cold escape through the door. What it does:

• Reestablishes the door's internal thermal barrier to help maintain proper temperature
• Reduces door-surface condensation or frost caused by lost insulation
• Helps prevent warm spots and uneven cooling near the door
• Supports proper sealing and energy efficiency when paired with intact gaskets

• Unplug the appliance before starting any repair
• Removing the door panel/pocket is usually required; handle panels and clips carefully
• Avoid puncturing or compressing the foam during installation
• Follow the manufacturer service manual or instructions for disassembly and torque specifications

A replacement door gasket assembly that seals the refrigerator door to help maintain internal temperature and reduce energy loss. Restores a proper door seal to help keep food fresher and reduce cooling strain. What it does:

• Forms a tight seal around the refrigerator door to minimize cold-air loss and help maintain set temperatures.
• Helps prevent frost buildup and condensation inside the fresh-food compartment when the seal is compromised.
• Can reduce cycling frequency and excessive run time caused by a damaged or worn door seal.
• Common symptoms of a failing gasket: visible gaps, cold spots, frost or ice buildup, or condensation on the door edges.

• Disconnect power to the appliance before starting any repair.
• Remove food and door-mounted items as needed for safe access and handling.
• Align the gasket into the door channel, working it evenly around the perimeter so it seats fully; some distortion may correct after a short run time.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

This replacement door basket mounts on the refrigerator's fresh-food door to hold bottles, jars, and condiments. Restore secure, organized storage and prevent items from tipping or falling when the door opens and closes.

• Holds and organizes items on the refrigerator door
• Direct replacement for a cracked, broken, or missing bin
• Helps prevent spills and items falling during door operation
• Common symptoms: bin cracked, loose, falls off, or won't stay seated

• Unplug the refrigerator and remove contents from the bin before replacement
• Doors may use different bins by position—match location to your model diagram
• Align bin hooks with the door slots and press down until fully seated

The Door Basket is an OEM part for LG refrigerators. It is designed to fit within the refrigerator door, offering additional storage space for items such as jars, bottles, condiments, or other smaller food items. It helps maximize the storage capacity of your refrigerator and keeps frequently used items within easy reach.

Causes of a faulty door basket can include wear and tear over time, damage due to accidental impacts or mishandling, or broken or worn-out attachments. These factors can result in a loose or unstable basket, compromised storage capacity, or difficulty in accessing or retrieving items.

Symptoms of a bad door basket may include:

• Loose or unstable attachment to the refrigerator door
• Cracked or broken basket
• Limited storage space or difficulties in organizing items

This LG bin can also be used in some Sears/Kenmore refrigerators. 

STOPPER ASSEMBLY,DOOR

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

This connector secures and transmits motion between the drawer drive and the sliding assembly, restoring smooth drawer movement and alignment. It's a direct-fit replacement that helps fix sticking, slipping, or non-moving drawers. What it does:

• Couples the drawer drive mechanism to the sliding gear, allowing the drawer to open and close reliably
• Replaces worn or broken connector teeth or mounts that cause skipping or jammed operation
• Helps correct uneven or noisy drawer movement caused by damaged linkage
• Restores proper engagement so the drawer responds to normal open/close controls

• One connector as shown

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Inspect surrounding gears, tracks, and mounting points; replace any damaged parts for best results
• Basic hand tools are typically required; handle plastic gears carefully to avoid further damage

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water